We exhibited at the Sewer Exhibition '18 in Kitakyushu!

[NETIS Registered] No worries even if obstacles appear! Compatible with φ800 to 3000 mm. *Exhibited at the 2018 Kitakyushu Sewerage Exhibition!

The "Milling Mole Method," a ground obstacle response type mud-based thrusting method equipped with four special functions: exploration, improvement, cutting, and guidance, consists of three devices: a tunneling machine, a special telescopic pipe, and a special injection pipe, allowing for the precise cutting and removal of underground obstacles. Using electromagnetic waves, it explores metal obstacles ahead while thrusting and can also improve the ground from within the tunneling machine before and after the detected obstacles. In the event an obstacle is detected, the special telescopic device can be used to cut through the underground obstacle at ultra-low speed, allowing for continued thrusting. Additionally, a system is equipped to guide the tunneling machine to a designated position within the arrival shaft by installing a receiving coil at that location, making it the ultimate thrusting method capable of achieving high precision even when obstacles are encountered. 【Performance by Obstacle Type】 ■CASE-6 Steel Sheet Pile 3W Cutting ■CASE-7 Steel Sheet Pile 3 & H Steel Cutting ■CASE-8 Wooden Pile & Steel Sheet Pile Cutting ■CASE-9 H Steel & Existing Manhole Wall Cutting ■CASE-10 Underground Continuous Wall & Metal Object Cutting *For more details, please refer to the PDF document or feel free to contact us.

• Site and ground investigation
• Civil Engineering Method
• Special Construction Method

Removal and discharge of a φ1800mm Hume pipe! A pushing method that ensures safety even in the presence of obstacles!

The underground obstacle-responsive mud-based propulsion method "Milling Mall Method" consists of three devices: a tunneling machine, a special expandable pipe, and a special injection pipe, which crush and discharge metallic obstacles. In the sewer construction of Section 42 in Yao City, Osaka Prefecture, the cutting and removal of a concrete pipe was carried out. Immediately after starting, the existing propulsion concrete pipe with a diameter of 1800 mm was cut diagonally over a section of 8.21 meters, which was an obstacle, and then normal tunneling was performed to reach the existing special manhole. At the existing manhole, the head was completely destroyed, and the plan was to disassemble and recover everything else. *For more details, please refer to the PDF document or feel free to contact us.*

• Site and ground investigation
• Civil Engineering Method
• Special Construction Method

It's not surprising if anything comes out; the entire site is an example of land reclamation excavation.

This document introduces the construction achievements related to the new pipeline installation work at the Oi Thermal Power Plant. This project involved the installation of new pipelines within the Oi Thermal Power Plant, and due to the site being filled, it was uncertain whether sheet piles or H-beams would be encountered; it was possible to find concrete debris or metal fragments, among other things. In reality, only pine piles and what appeared to be concrete debris from some base were encountered, and the use of expansion jacks was not necessary. 【Construction Case】 ■ Project Name: New Pipeline Installation Work Related to Oi Thermal Power Plant ■ Client: Tokyo Electric Power Company Holdings, Inc. ■ Contractor: Wakachiku Construction Co., Ltd. Tokyo Branch ■ Pipe Diameter: 1350 mm ■ Pushing Length: 190.5 m ■ Soil Type: Clayey Soil ■ N Value / Gravel Ratio / Maximum Gravel Diameter: N=2–10 G=0% φmax=100 mm ■ Construction Period: August 2015 to October 2015 (2.5 months) ■ Type of Obstacles: Insurance Method, Pine Piles, Concrete Debris, Wood Pieces *For more details, please refer to the PDF document or feel free to contact us.

• Site and ground investigation
• Civil Engineering Method
• Special Construction Method

Leave the construction of long distances and sharp curves in small-diameter propulsion to the jet method!

The "JAT Method" is a thrusting method that enables long-distance and sharp curve construction in small-diameter thrusting. Instead of measurements from the ground, it uses a CCD camera sensor for underground surveying from the starting pile, which means it is not affected by buried objects, electric wires, or tracks. The method for curve measurement involves inserting multiple CCD camera sensors into the pipe and measuring targets located at the front and back of the machine with the CCD camera sensors. The image information sent from the sensors is processed by a PC on the ground to quickly calculate the discrepancies between the plan and the construction. [Features] ■ Compatible with deep thrusting ■ Simple structure and easy handling ■ Three-dimensional traverse surveying using high-resolution CCD camera sensors ■ Roll conveyor rail (patented) ■ Capable of handling a wide range of soil types *For more details, please refer to the PDF or feel free to contact us.

• Sewerage facilities
• Waste treatment facilities
• Site and ground investigation

We are pleased to announce that Gywood has been recommended as a featured building material in the special project "Recommended Building Materials" at the Housing Business Fair within the comprehensive exhibition for housing, architecture, and real estate [BREX Kansai]. We will be exhibiting in the "Recommended Building Materials and Equipment" zone, where professionals from the field gather to showcase their recommended materials. We invite everyone to stop by and visit us.

Seminar Overview As the labor shortage in manufacturing sites becomes more severe, the labor costs and time losses associated with the "transportation" of products and components, as well as "cleaning" within factories, have become critical management issues that cannot be overlooked. In this webinar, we will introduce the latest use cases of "Autonomous Mobile Robots (AMR)" and "Commercial Cleaning Robots" that achieve productivity improvements in manufacturing environments. We will specifically address questions such as "How are other companies operating these technologies?" and "What kind of cost reduction effects can be expected after implementation?" by providing concrete explanations of actual before-and-after scenarios and operational flows. Factory managers and members of production technology and DX promotion departments who want to advance automation and efficiency on-site are encouraged to participate! Recommended for: - Those who are unsure about where to start with automation, labor reduction, and DX in their factories. - Those who want to alleviate labor shortages on-site and focus resources on core operations to improve productivity. - Those who want to stay updated on the latest trends in the use of transportation robots (AMR) and cleaning robots.

Our representative, Koichi Yokoyama, will be speaking at an online seminar scheduled for November 27 (Friday). Participation is possible from anywhere in the country. We hope you will join us! 【Event Overview】 Date: November 27, 2026 (Friday) 13:00 - 15:05 (Deadline: November 25, 17:00) Venue: Online (Zoom) / Participation Fee: Free (Pre-registration required, lottery system) Organizer: Otsuka Shokai Co., Ltd. 【Session Details (14:05 - 14:35)】 "What Does Reliable Data Creation Mean? - Insights from Certified Public Accountants and Tax Accountants on Creating Trustworthy Data Before Relying on AI" We will discuss the quality and reliability of data that influences AI outcomes, covering points such as "Considerations for Practicing DX" and "Data Integrity and Authenticity" from the perspectives of certified public accountants and tax accountants, to lay the groundwork for safely utilizing AI. *Applications from competitors or similar industries may be declined. *Inquiries: Otsuka Shokai Co., Ltd. Seminar Office (ai-datasuishin@otsuka-shokai.co.jp)

We will hold the first technical seminar on lightweight embankment construction methods and glass foam recycled materials in Sendai City, Miyagi Prefecture. Registration is limited to the first 126 applicants. "Technical Seminar on Lightweight Embankment Construction Methods and Glass Foam Recycled Materials" 【Program】 1. Lightweight Embankment Construction Method (1) What is lightweight embankment material? (2) Information on lightweight embankment materials (3) Application range (4) Construction achievements (5) Workability 2. Glass Foam Recycled Materials (1) What are glass foam recycled materials? (2) Features (3) Design soil constants (4) Considerations for design and construction (5) Application examples On February 12, 2027 (Friday), the "Technical Seminar on Lightweight Embankment Construction Methods and Glass Foam Recycled Materials" will be held at the Sendai Conference Center, 8th Floor, 2-2-10 Chuo, Aoba-ku, Sendai City, Miyagi Prefecture, as a CPD accredited program by the Japan Society of Civil Engineers (2.7 units). As there are only 126 spots available, please register early. For details and registration, please refer to the attached file.

CIC Corporation will be exhibiting at 'EdgeTech+2026' held at Pacifico Yokohama. At the CIC booth, we will showcase the meter remote automatic reading system [XQC series] with actual equipment. We sincerely look forward to your visit.