AD-COAT Preventing troubles caused by changes in the natural environment

Forms a strong permeable layer to protect the material! Resistant to wear and maintains anti-soiling effects for a long time.

"AD-COAT" is a penetrating water-repellent agent that forms a permeable layer within stone materials. While it does not have the strong water-repellent properties of typical water repellents, the permeable layer prevents water from seeping in, thereby suppressing dirt, stains, and deterioration. Additionally, because it forms a layer within the stone, it is resistant to wear from foot traffic and provides long-lasting anti-soiling effects. It is suitable for finishing natural stone, concrete, tiles, bricks, and other materials. 【Features】 ■ Natural finish appearance ■ Prevents wet color effects ■ Prevents issues caused by changes in the natural environment ■ Product lineup for various types of stone and materials *For more details, please feel free to contact us.

• Interior stone
• Exterior Stone

High durability and high moisture resistance! Can be used for finishing materials that enhance expressions with a natural finish.

"AD-COAT" is not a product designed for surface water repellency, but rather a penetrating water-repellent agent that densifies the material itself to reduce water absorption. Since stone and concrete products are hygroscopic, problems such as dirt, efflorescence, freeze damage, and deterioration due to neutralization can occur. In places with high humidity, where there is always a supply of water, mold and algae can develop, leading to aesthetic issues and health problems caused by fungi. By applying waterproofing and water-repellent treatments, these problems can be prevented. 【Features】 ■ Natural finish ■ High durability and high water-repellent properties ■ Prevents staining and the phenomenon of mortar efflorescence from the surface ■ Suppresses the infiltration of acid rain and wastewater *For more details, please feel free to contact us.

• Interior stone
• Exterior Stone

We have newly added the "RB Catcher," a log capture device installed on impermeable sediment control dams in flow sections, to our product lineup and have started sales. The RB Catcher is directly attached to the upstream part of the impermeable sediment control dam to enhance log capture functionality. Unlike the conventional straight arrangement, it features a structural layout that creates gaps between units, ensuring that water flow is maintained without causing blockages after capturing logs. This allows for the reliable capture of subsequent logs without overflow, preventing damage downstream. By adding this new log capture device to our lineup, we will flexibly respond to various needs in the field.

This time, the ACS-5000 is available as a facial recognition terminal compatible with FaceMe Security's add-on feature "Face Terminal," enabling access control management that combines "advanced anti-spoofing features" with high-speed facial recognition powered by edge AI. ■ Main Features 1. Accelerated Authentication Processing FaceMe Security is optimized for the MediaTek Genio 700's NPU, achieving faster facial recognition processing and reduced CPU load compared to processing with only the CPU. It ensures stable authentication without delays even during peak times, such as clocking in and out, contributing to alleviating congestion. 2. Advanced "Anti-Spoofing" Optimized for the IR + RGB camera mounted on the ACS-5000. It can quickly detect fraudulent authentication using photos, videos, or 3D masks within 0.6 seconds, ensuring reliable identity verification. 3. Door Control Without Additional Equipment FaceMe Security can directly control the digital I/O of the ACS-5000, allowing for the construction of an access control management system without the need for additional equipment. This simplifies system configuration and reduces implementation costs.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

The receiver section of the radio is designed to receive signals properly even when influenced by other radios used in the world, and standards have been established for this purpose, requiring designs that comply with these standards. This time, I will briefly discuss the wireless standards for the receiver section! 【Contents】 ■ Minimum reception sensitivity ■ Adjacent channel selectivity ■ Receiver intermodulation ■ Spurious response ■ Harmonic emission * For more details, please refer to the PDF document or feel free to contact us.