[Exhibition Participation Information] 8th International Agricultural Materials EXPO @ Makuhari Messe / October 10 (Wed) - 12 (Fri), 2018

[August 2020 NETISV Rank Upgrade!] 33 years of usage record! Durable and long-lasting domestic recycled plastic sheets made from materials that are hard to break!

The "Ripi Board" is a recycled plastic sheet certified by the Ministry of Land, Infrastructure, Transport and Tourism's NETIS, Eco Mark, and ARIC. It is made from materials such as "low-density polyethylene from waste wire insulation" and "recycled high-density polyethylene," resulting in a flexible and strong recycled plastic sheet. Additionally, we can provide formulations with added value such as anti-static and flame retardant properties. We offer a variety of sizes and patterns, allowing you to choose based on your intended use. **Features** - "Durable": Resistant to oil, mud, and water, capable of supporting 20-ton trucks. - "Lightweight": Can be easily installed without heavy machinery. - "Long-lasting": Resistant to direct sunlight with a proven usage record of 30 years. - "Eco-friendly": Can be collected and recycled when no longer needed. - "Easy to clean": Pattern design makes it easy to remove mud stains. Please feel free to touch and verify it for yourself! ☆ We are currently offering a free cut sample (one-sided convex type) ☆ If you are interested, please fill out the inquiry form below, clearly stating "Request for cut sample," and include the intended use you are considering. For more details, please contact us or download the catalog.

• Temporary Construction Materials
• Scaffolding and Support Materials
• Dam construction

It's lightweight, so no heavy machinery is needed for installation!! It can be installed by one person!!

The recycled plastic U-shaped gutter "U-junction" 300L can be processed since it is made of plastic. It can be easily installed with DIY. Connections can be made using commercially available sealing tape and stainless steel screws. By using a grating (sold separately), the strength is increased, allowing trucks to pass through. 【Features】 ○ No heavy machinery required for installation; lightweight enough for one person to install ○ Weather resistance of 20 years ○ Trucks can pass through if the appropriate grating is used ○ Easy to connect and process ○ Does not contain substances that pollute the soil For more details, please contact us or download the catalog.

• Gutters and U-shaped gutters
• Piping materials (plastic pipes)

The uses are various. It is helpful in many different situations.

The recycled plastic U-shaped gutter "U-shaped Road" 150S can be processed since it is made of plastic. It can be easily installed with DIY. Connections can be made using commercially available sealing tape and stainless steel screws. By using a grating (sold separately), the strength is increased, allowing trucks to pass through. 【Features】 ○ No heavy machinery required for installation; lightweight allows for installation by one person ○ Weather resistance of 20 years ○ Trucks can pass through if appropriate grating is used ○ Easy to connect and process ○ Does not contain substances that pollute the soil For more details, please contact us or download the catalog.

• Gutters and U-shaped gutters

No need for 'ridge painting' and 'ridge grass cutting work'! Convenient eco-mark certified products made with recycled resin.

The "Azehanto (ridge) cover" eliminates the need for 4 to 5 grass cutting operations per year. It is a protective cover for ridges made from recycled plastic. Simply cover the ridge and connect it without the need for special tools, and it can be easily removed during the movement of agricultural machinery between fields. Furthermore, due to its lightweight, installation is easy, and since grass does not grow, the occurrence of turtle bugs is minimal, reducing damage to rice. We offer both "single support type" and "double support type," allowing for safe walking without slipping even on rainy days. 【Features】 ■ No need for grass cutting on ridges ■ No need for ridge painting ■ Easy installation due to lightweight ■ Ridge width minimized to the necessary minimum ■ Difficult for turtle bugs to occur ■ Safe walking without slipping even on rainy days *For more details, please refer to the PDF document or feel free to contact us.

• others

We will be exhibiting at the "Financial International Information Technology Exhibition" FIT Osaka 2026, which will be held at Grand Front Osaka on September 3 (Thursday) and September 4 (Friday). We will introduce the features of our human resources information system "Fellowship," which includes various functions useful for HR department operations, such as personnel management, payroll, and employment.

Our company will invite professors who are active at the forefront of university research to hold a web technology course in the construction field. This time, as a follow-up to "The Effects and Design Considerations of Shield Tunnels in Proximity and Adjacent Situations - Part 1," which was published in July, we will have a lecture by Professor Noriyuki Horiuchi from Kokushikan University. In "Part 1," we explained the phenomena of the effects caused by proximity and adjacent shield tunnels, using examples of left-right adjacency and passing beneath existing tunnels, as well as the basic concepts of numerical evaluation. In "Part 2," we will focus on the vertical adjacency of large-section shields. We will introduce analytical methods for numerically evaluating the impact on existing tunnels, surrounding ground, and existing underground structures, using actual site measurement data and FEM sequential excavation analysis, specifically in cases where large-section shields are constructed above or below existing tunnels. We will also discuss methods for predictive analysis, design, and construction considerations. This course will be beneficial for those studying for the "Professional Engineer Examination," so please take this opportunity to participate. Additionally, this course is a CPD accredited program by the Japan Society of Civil Engineers (planned), and you can also participate as part of engineer education. We sincerely look forward to your participation.

In this webinar, we will clearly explain effective operational methods based on media characteristics, timing for posting, and points for improvement after publication. It is not only important to "collect applications" in recruitment. To prevent mismatches and early turnover after hiring, it is crucial to review the entire recruitment process, including how job information is conveyed and what to confirm during the selection process. Therefore, we will also introduce how to design the recruitment process to prevent discrepancies in understanding with job seekers and to enhance retention rates. Additionally, in small and medium-sized enterprises with few recruitment personnel, the workload involved in creating job postings, responding to applicants, and measuring effectiveness can become a significant burden. We will also explain how to systematize and streamline media operations to make recruitment tasks more efficient, allowing continuous recruitment activities even with limited personnel. Finally, based on the content introduced this time, we will organize and convey specific improvement actions that can be implemented starting tomorrow. Even companies that find it difficult to increase their recruitment budget may have the potential to enhance recruitment outcomes by reviewing their choice of job media, job postings, operational methods, and recruitment processes.

Our company will be exhibiting at the on-site DX EXPO【Autumn】held at Makuhari Messe, in collaboration with Japan Comsys Corporation, TOSYS Corporation, NDS Corporation, and Tomei Communication Industry Corporation, as part of the Comsys Group. This exhibition is held within the "Japan DX & AX Week" and is a specialized exhibition where the latest solutions supporting digital transformation (DX) such as image processing AI, remote monitoring, and robotics gather for those working in various fields such as construction sites and factories. We will also be introducing various AI-powered solutions from our company. Exhibited Products: - Collaborative solutions from various companies (AIJO Site Monitor 'Bear Detection Solution') - AI rebar shape measurement system 'AIJO Rebar King -AIJO HiKing-' - AI monitoring solution 'AIJO Site Monitor' - Safety gear inspection before work 'AIJO Safety' - Product appearance inspection solution for manufacturing industry 'AIJO Check AItem' - Automated drone inspection service for solar power plants 'AIJO Check Solar' and more.

JMP is software that not only excels in statistical analysis and graph creation but also has robust features for experimental design. By utilizing experimental design, efficient data collection can be achieved while minimizing time and costs. In this seminar, we will focus on the features of experimental design, specifically the sample size explorer and Bayesian optimization, and demonstrate examples of their application in the manufacturing industry. 【Overview】 First half: Utilization of t-tests in the manufacturing industry and simulation of required data numbers We will explain the overview and examples of t-tests, which are used for various purposes in the manufacturing industry, and present analysis examples using JMP. Additionally, we will introduce a method to simulate the relationship between the required data numbers for t-tests and statistical power using the sample size explorer. Second half: How to utilize JMP Pro Bayesian optimization – Application to simulation experimental data The Bayesian optimization platform is originally designed for experimental data that includes measurement errors, but there is also a strong demand to apply it to simulation experimental data that does not contain errors, such as CAE. In this seminar, we will introduce approaches for utilizing Bayesian optimization with simulation experimental data.