29th Tokyo Design and Manufacturing Solutions Exhibition

Introducing case studies of the structural analysis software 'ISCEF' optimized for large-scale structures.

We will introduce the use case of the structural analysis software 'ISCEF', which is optimal for civil engineering structures. In large-scale mass concrete construction, such as dams, temperature stress due to the hydration heat of cement and temperature cracking become significant issues. To achieve higher quality construction, factors like lift schedules and curing conditions have a major impact, and these construction conditions also reflect on the project timeline and costs, necessitating more optimal construction plans. Our company considers the characteristics of the analysis target and proposes appropriate analysis approaches and methods. 【Temperature Analysis】 ■ Analysis Settings ■ Temperature Conditions ■ Constraint Matrix Method *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments
• Other analytical equipment
• Other Software

Introducing case studies of the structural analysis software 'ISCEF', optimized for large-scale structures.

We would like to introduce the case studies of the structural analysis software 'ISCEF', which is optimal for civil engineering structures. In tunnel design, which has been based on empirical engineering, there is a growing demand for deeper investigations through numerical analysis. Our company proposes the most suitable analysis methods according to construction conditions such as excavation and support work. Furthermore, by reproducing the nonlinear characteristics of structural elements (beams, rods, springs, etc.) necessary for modeling not only the ground but also the structures, we can achieve analyses with enhanced reproducibility. [Tunnel Analysis] ■ Initial Earth Pressure Analysis - Pre-excavation earth pressure stress - Post-excavation stress distribution ■ Construction - Construction model - Post-construction stress distribution *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments
• Other analytical equipment
• Other Software

Static and dynamic analysis of important related structures of dams, such as gate pillars and weirs! Structural analysis software 'ISCEF' suitable for civil engineering structures.

We will introduce a case study on the use of the structural analysis software 'ISCEF', which is suitable for civil structures. The gate post is the part that serves as the pillar for the gate and the superstructure. If the gate post itself is damaged, it will become impossible to open and close the gate, leading to an inability to adjust the water level, which in the worst case could result in the collapse of the dam. Therefore, improvements in seismic resistance are required for this important related structure of the dam. Our company undertakes tasks such as creating models of the gate post (M-Φ model, fiber model), capacity-based horizontal resistance method, and dynamic analysis. [Gate Post Analysis] ■ Eigenvalue Analysis ■ Static and Dynamic Analysis *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments
• Other analytical equipment
• Other Software

Creation of gate models, analysis, post-processing such as plasticity checks and buckling checks! We will introduce examples of the use of the structural analysis software ISCEF, suitable for large-scale structures.

We would like to introduce a case study on the use of the structural analysis software 'ISCEF', suitable for civil structures. As an ancillary facility of a dam, gates play a significant role in ensuring the safety of the downstream area. Therefore, gates must be designed to withstand major earthquakes without being destroyed, and finite element analysis is an effective method for verifying this. Our company undertakes a series of tasks related to gate analysis, including model creation, analysis, post-processing such as plasticity checks and buckling checks. [Gate Analysis] ■ Eigenvalue Analysis ■ Static and Dynamic Analysis ■ Plasticity and Buckling Checks *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments
• Other analytical equipment
• Other Software

Nonlinear dynamic analysis can reproduce the occurrence and progression of cracks at their origin! ISCEF, a structural analysis software suitable for large-scale structures.

We would like to introduce the application examples of the structural analysis software 'ISCEF', suitable for civil engineering structures. In concrete structures such as gravity dams, it is necessary to simulate crack propagation, reproduce the movement of joint connections, and conduct analyses considering propagation speed by modeling the reservoir as a compressible fluid. To understand the vibration characteristics of the entire dam, we propose optimal analysis procedures and methods, taking into account the characteristics of the analysis targets, including "actual eigenvalue analysis," "static analysis," and "time history response analysis." [Gravity Dam Analysis] ■ Actual Eigenvalue Analysis ■ Static Analysis ■ Time History Response Analysis *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments
• Other analytical equipment
• Other Software

It is a structural analysis software (CAE) specialized for civil engineering structures such as dams and related structures. It is capable of coupled analysis of structures and fluids, as well as slip stability analysis.

"ISCEF" is a general-purpose structural analysis code developed independently by our company using the finite element method. It excels in the analysis of ground, rock, and related structures due to its dynamic analysis coupling capabilities for structures and fluids, as well as its crack tracking functionality for concrete structures. However, it also demonstrates sufficient functionality in general structural analysis due to its high versatility (including two-dimensional and three-dimensional problems, static and dynamic problems, linear and nonlinear problems, etc.). We have a proven track record not only for the dam body but also for various ancillary structures such as steel gates, dam intake towers, and gate pillars. Leveraging the strengths of our in-house development, we can accommodate detailed customizations based on your requests. Additionally, we offer contracted analysis services using the same software. *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments
• Other analytical equipment

TwooCa is pleased to exhibit once again at IT Trend EXPO 2026 Summer, one of Japan's largest online exhibitions for business solutions. Register and attend for a chance to receive an Amazon Gift Card! (Limited to the first 10,000 attendees.) ------------------------- ★INVITATION TICKET ------------------------- Kort Valuta invites you to IT Trend EXPO 2026 Summer! Please register through our exclusive invitation page below: Register here (Free | Takes about 1 minute) https://it.expo.it-trend.jp/key/dhytwu9p At our online booth, we will showcase TwooCa—an all-in-one solution built around Digital ID to connect companies and employees. Featured solutions include: ・Digital Expense Reimbursement ・Digital Payroll (In Preparation) ・Meal Benefits ・Mental Health Check ・Thanks Messages ・Employee Marketplace for Company Products As this is an online exhibition, you can freely visit booths and watch sessions anytime during the event. ------------------------- ★Event Information ------------------------- ・September 1–4, 2026 ・Online Event ・Free Admission The event also features keynote sessions by leading entrepreneurs, authors, and AI experts. We look forward to welcoming you to the TwooCa online booth! #ITTrendEXPO #HRTech #BackOfficeDX #DigitalTransformation #EmployeeExperience #DigitalID #FinTech #TwooCa

We will hold a webinar on the kintone plugin "Mojitori," which can extract text from photos and PDFs and convert it into data! 【Make Equipment Inspections Easier! On-Site Mojitori Utilization Seminar】 ◆ Seminar Overview The kintone plugin "Mojitori" allows you to convert text from photos, images, PDF files, etc., and automatically input it into various fields in kintone. In this seminar, we will guide you through the setup of Mojitori, including a demonstration of capturing and registering equipment label information and inspection forms on-site. If you are currently required to fill out paper forms on-site and then manually input the data after returning to the office, why not reduce the burden of registration tasks that arise every time you visit multiple sites in a day? 【Recommended for the following people】 - Those who record equipment label information for equipment management - Those who want to reduce data entry tasks for inspection forms, etc. - Those who want to learn how to set up Mojitori 【Timetable】 - About the Mojitori plugin - How to set up the necessary Mojitori plugin - Operation demonstration (importing equipment label information and inspection forms) - Available plans and usage fees - Q&A session We look forward to the participation of many people.

Koichi Yokoyama, President and CEO of Paperlogic Co., Ltd., will speak at the "FPoS Developers Conference 2026," which will be held at the Tokyo International Forum on July 28 (Tuesday) and July 29 (Wednesday). The Paperlogic booth will also be exhibited, so please stop by. The FPoS Developers Conference 2026 is an event organized by Japan Communications Inc. that focuses on FPoS. At this event, experts from various industries and positions will present under the vision of "Trust by Design." Additionally, booths from various companies providing FPoS-related services will be exhibited. *FPoS: Fintech Platform over Security module. Developed by Japan Communications Inc., it serves as a trust foundation for the digital society. --- ◆Conference Presentation◆ July 29 (Wednesday) 16:30 - 17:00 "The official seal, inside your smartphone." Speaker: Koichi Yokoyama, President and CEO of Paperlogic Co., Ltd.

Many of the data handled by companies, such as sales, inventory levels, and sensor measurements, are "time series data" recorded over time. The situations in which such data is handled have been increasing in recent years. In this seminar, we will use real time series data as a subject to explain everything from the visualization of time series data to quantifying factors through regression, forecasting using time series models, and What-if analysis, with demonstrations included. When it comes to regression, it is important to pay attention to the point where previous and subsequent values are interrelated (autocorrelation), but by using time series models that take advantage of this characteristic, accurate predictions can be made. You will gain insights into the unique handling techniques of JMP and tips for utilizing business data for forecasting and decision-making. 【Main Content】 Using real time series data as a subject, we will convey the following items with JMP demonstrations: - The benefits and important considerations of analyzing time series data with JMP (date processing, lag functions, etc.) - Visualization of time series data (considerations using line graphs and smoothed lines) - Quantification of factors through regression models - Future forecasting and What-if analysis using time series models (ARIMA, smoothing) - Features and differentiation of JMP's platforms "Time Series Analysis" and "Time Series Forecasting"

Even engineers can achieve this. Patent research transformed by AI search × BI! In daily patent research, many face challenges such as: "I don't know how to create search queries or what appropriate keywords to use..." "There are too many results to read, and I can't analyze them..." "In the end, I end up relying on the IP department or specific experts..." These issues lead to prolonged research times and delayed decision-making... However, patent research conducted by "on-site engineers" is considered crucial because they have the deepest technical understanding. In this seminar, we will explain the entire process from research and analysis to R&D and strategic planning using PatentSQUARE, in a practical format from an engineer's perspective. We will first break through the "entry point of research" with AI search, resolve the "inability to analyze" bottleneck with the IP BI dashboard, and achieve a seamless process without relying on other tools. ≪Recommended for≫ ● Those in research and development or technical departments ● Those considering new technology themes ● Those who want to improve research efficiency If you want to learn how to conduct "research that leads to decision-making" rather than just searching, please feel free to join us.