For heatstroke prevention. W board.

Small group, can be set up in a short time! This lightweight base board significantly reduces transportation costs.

The wood-plastic composite flooring board W Board is an intermediate product between steel plates and rubber mats. Weighing only 39 kg, it can be set up by a small number of people in a short time, significantly reducing transportation costs. Additionally, the elimination of crane operations enhances safety and prevents work-related accidents. Compared to steel plates, it can reduce noise during transportation and setup. Wood-plastic is a composite material made by mixing wood fibers with plastic (polyethylene). It is a fiber-reinforced material that utilizes woody fibers to strengthen the resin. By using by-products from lumber processing, low costs are achieved. Furthermore, by reducing the heavy machinery required for installation and fuel during transportation, carbon dioxide emissions can be reduced by 86%, making it an environmentally friendly product. 【Features】 ○ Registered product with the Ministry of Land, Infrastructure, Transport and Tourism "NETIS" ○ Intermediate product between steel plates and rubber mats ○ Lightweight at 39 kg for cost reduction ○ Reduces noise during transportation and setup ○ Effective use of renewable wood resources For more details, please contact us or download the catalog.

• Secondary paving products
• Paving of sidewalks, roads, parking lots and stadiums

Produced in a reliable domestic factory! Resin-based construction mats W board.

This product is a lightweight construction board W board in a 4×8 size, weighing 25kg. It has excellent water resistance and can be used in wet areas. It is lighter and easier to transport than steel plates or rubber mats. Additionally, it can be processed using electric saws, hand saws, and drills for cutting and hole-making. Furthermore, it is not affected by oil, gasoline, or chemicals. 【Features】 ■ Labor-saving ■ Safety ■ Environment ■ Noise reduction ■ Cost reduction *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• Temporary Construction Materials

A ground board that can be set up with a small number of people in a short time without using a crane! Significantly reduce transportation costs with the ground board! A lightweight ground board weighing 39kg! The ground board and W board are NETIS registered products.

The wood-plastic composite board W Board is a resin-made board registered in the Ministry of Land, Infrastructure, Transport and Tourism's new technology information system NETIS. Its effectiveness was recognized in a Ministry of Land, Infrastructure, Transport and Tourism construction project in 2019, leading to its VE registration. The handling of our board products is expanding across rental companies nationwide. Due to its lightweight nature, it can be set up by a small number of people in a short time, significantly reducing transportation costs. It contributes to cost reduction for construction, events, and temporary parking lots. Additionally, replacing steel plates with our boards eliminates the need for crane operations, leading to enhanced safety and prevention of work-related accidents. By reducing the fuel consumption of heavy machinery required for installation and transportation, it can achieve an 86% reduction in carbon dioxide emissions, making it an environmentally friendly board. Rental services are available nationwide through our partner rental companies. Please feel free to consult us for both small-scale projects and large lots where local inventory may be insufficient. 【Contact】 　Phone: 03-5844-3366 　FAX: 03-5844-3367 　Or via the inquiry form on Ipros. You can check rental handling stores (some) from the following site: https://www.wpt.co.jp/rental/index.html

• Secondary paving products
• Paving of sidewalks, roads, parking lots and stadiums

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

The "HM-S6" is an embedded park sensor that detects vehicles through changes in magnetic flux and responds to various situations from passing to stationary vehicles. It can be used for the opening and closing of input doors at waste treatment plants, as well as for gates that vehicles pass through and outdoor parking applications. It can also be installed on rebar and steel plates. 【Features】 ■ Resistant to the effects of natural environments such as rain, snow, temperature changes, and geomagnetism ■ Protection rating IP68 reduces the risk of water ingress ■ Ten times the load capacity compared to conventional embedded park sensors (based on our comparison) ■ Can distinguish between vehicles even when they pass continuously ■ Can be installed on rebar and steel plates *For more details, please refer to the PDF document or feel free to contact us.

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, or management: Are you facing any challenges with current issues or selecting the right sensors for parking management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Vehicle Detection Sensor Basic Guide This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document presents the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

SBS Marketing Co., Ltd., which provides consulting services related to marketing, sales promotion, and customer acquisition primarily in the BtoB (business-to-business) sector based on practical experience in support companies and business companies, has published a page titled "Project Budget Overruns, Delays, and Increased Resource Burden!? 'Scope Creep'" on November 11, 2025 (Tuesday). 'Scope creep' refers to the gradual expansion of a project's initial scope without following formal processes, leading to delays, budget overruns, and increased resource burdens. The page explains examples of occurrence, the negative impacts that can arise, as well as the causes and countermeasures. (Page Overview: Excerpts) ■ What is 'Scope Creep'? ■ Examples of 'Scope Creep' occurrence ■ Negative impacts caused by 'Scope Creep' ■ Causes of 'Scope Creep' ■ Countermeasures to prevent 'Scope Creep' (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/scope-creep-2025-11/