*Finished* 【2018/2/28～3/2】 6th International Wind Power Exhibition ～WIND EXPO 2018～ Exhibition Information 【East 5: E37-39】

Suitable for wind power generation of 1.5MW to 3.5MW! A compact and lightweight gearbox specialized for rotary drive.

The "7TW Series" is a multi-layer reduction gear specialized for swivel drive. It further miniaturizes the existing yaw drive, and the new system for nacelle directional control is equipped with a brake for the inverter-controlled motor. This new design can be easily integrated into applications and has simplified maintenance. 【Features】 ■ Suitable for wind power generation from 1.5MW to 3.5MW ■ Miniaturization ■ Lightweight ■ Fewer components ■ Easy installation *For more details, please refer to the PDF document or feel free to contact us.

• Power generation equipment
• others

High torque capacity and a wide reduction ratio for high efficiency! Used by many wind power generation manufacturers.

The "700T Series" is a planetary gearbox used for pitch and yaw control in wind power generation systems. To increase the transmitted torque, each stage has 3 to 4 planetary gears, and to achieve high efficiency, the planetary gears are supported by roller bearings or roller track bearings. It is used by many major wind power manufacturers, demonstrating its performance. 【Features】 ■ Flange mounting ■ Output shaft with spline or pinion gear ■ Reinforced structure ■ High torque capacity ■ Output shaft supported by heavy-duty bearings *For more details, please refer to the PDF materials or feel free to contact us.

• Power generation equipment
• others

Achieving improved performance of the turning system, increased reliability, and reduced system costs!

Using an electric motor equipped with the "Agile Inverter" results in a significantly more space-saving design compared to conventional inverters that require separate electric motors for turning. Additionally, using a turning device equipped with the "Agile Inverter" improves the performance of the turning system, increases reliability, and reduces system costs. 【Features】 ■ Space-saving ■ Improved performance of the turning system ■ Reduced system costs ■ Power: 1.1 kW to 11 kW ■ Built-in EMC filter for simplified EMC compliance *For more details, please refer to the PDF materials or feel free to contact us.

• others

Application of a wind power generation swivel drive device! Compact sensorless inverter.

"Agile" is a compact type of sensorless inverter. It is used in applications such as the turning drive systems of wind power generation, which require simple starting, space-saving, and downtime prevention. 【Features】 ■ Compact ■ Control dedicated to open-loop drive ■ Asynchronous AC induction motor ■ Capable of driving a group of synchronous AC permanent magnet motors without feedback ■ Integrated safety design *For more details, please refer to the PDF materials or feel free to contact us.

• others

Adjustable brake torque! Inverter specification AC motor compliant with IEC standards.

The "BE Series" complies with all international standards, including EMC and LV directives, and meets IEC 60034-30:2008 (efficiency class) for AC motors. Output is available in the range of 0.75 - 22 kW, with mounting options in foot and flange styles. The flange style has settings for IM B5 and IM B14. A single shaft version is available, and there are two brake options for one type of DC motor and one type of AC motor. 【Features】 ■ Compliant with IEC ■ Inverter specification ■ Output range of 0.75-22 kW ■ Protection class IP54-IP55 ■ Adjustable brake torque *For more details, please refer to the PDF materials or feel free to contact us.

• others

Adjustable brake torque! Inverter specification electric motor compliant with IEC standards.

The "BN Series" is an electric motor for gear reducers that complies with IEC standards. There are two mounting methods: foot-mounted and flange-mounted, with flange-mounted options available for "IM B5" and "IM B14." Both single and dual polarity versions are possible, and there are three types of brake options for one type of DC motor and two types of AC motors. 【Features】 ■ Mounting methods: foot-mounted and flange-mounted ■ Inverter specifications ■ DC and AC power ■ Adjustable brake torque ■ Output range: 0.25 kW to 30 kW *For more details, please refer to the PDF document or feel free to contact us.

• others

We will be exhibiting at the "Financial International Information Technology Exhibition" FIT Osaka 2026, which will be held at Grand Front Osaka on September 3 (Thursday) and September 4 (Friday). We will introduce the features of our human resources information system "Fellowship," which includes various functions useful for HR department operations, such as personnel management, payroll, and employment.

Our company will invite professors who are active at the forefront of university research to hold a web technology course in the construction field. This time, as a follow-up to "The Effects and Design Considerations of Shield Tunnels in Proximity and Adjacent Situations - Part 1," which was published in July, we will have a lecture by Professor Noriyuki Horiuchi from Kokushikan University. In "Part 1," we explained the phenomena of the effects caused by proximity and adjacent shield tunnels, using examples of left-right adjacency and passing beneath existing tunnels, as well as the basic concepts of numerical evaluation. In "Part 2," we will focus on the vertical adjacency of large-section shields. We will introduce analytical methods for numerically evaluating the impact on existing tunnels, surrounding ground, and existing underground structures, using actual site measurement data and FEM sequential excavation analysis, specifically in cases where large-section shields are constructed above or below existing tunnels. We will also discuss methods for predictive analysis, design, and construction considerations. This course will be beneficial for those studying for the "Professional Engineer Examination," so please take this opportunity to participate. Additionally, this course is a CPD accredited program by the Japan Society of Civil Engineers (planned), and you can also participate as part of engineer education. We sincerely look forward to your participation.

In this webinar, we will clearly explain effective operational methods based on media characteristics, timing for posting, and points for improvement after publication. It is not only important to "collect applications" in recruitment. To prevent mismatches and early turnover after hiring, it is crucial to review the entire recruitment process, including how job information is conveyed and what to confirm during the selection process. Therefore, we will also introduce how to design the recruitment process to prevent discrepancies in understanding with job seekers and to enhance retention rates. Additionally, in small and medium-sized enterprises with few recruitment personnel, the workload involved in creating job postings, responding to applicants, and measuring effectiveness can become a significant burden. We will also explain how to systematize and streamline media operations to make recruitment tasks more efficient, allowing continuous recruitment activities even with limited personnel. Finally, based on the content introduced this time, we will organize and convey specific improvement actions that can be implemented starting tomorrow. Even companies that find it difficult to increase their recruitment budget may have the potential to enhance recruitment outcomes by reviewing their choice of job media, job postings, operational methods, and recruitment processes.

Our company will be exhibiting at the on-site DX EXPO【Autumn】held at Makuhari Messe, in collaboration with Japan Comsys Corporation, TOSYS Corporation, NDS Corporation, and Tomei Communication Industry Corporation, as part of the Comsys Group. This exhibition is held within the "Japan DX & AX Week" and is a specialized exhibition where the latest solutions supporting digital transformation (DX) such as image processing AI, remote monitoring, and robotics gather for those working in various fields such as construction sites and factories. We will also be introducing various AI-powered solutions from our company. Exhibited Products: - Collaborative solutions from various companies (AIJO Site Monitor 'Bear Detection Solution') - AI rebar shape measurement system 'AIJO Rebar King -AIJO HiKing-' - AI monitoring solution 'AIJO Site Monitor' - Safety gear inspection before work 'AIJO Safety' - Product appearance inspection solution for manufacturing industry 'AIJO Check AItem' - Automated drone inspection service for solar power plants 'AIJO Check Solar' and more.

JMP is software that not only excels in statistical analysis and graph creation but also has robust features for experimental design. By utilizing experimental design, efficient data collection can be achieved while minimizing time and costs. In this seminar, we will focus on the features of experimental design, specifically the sample size explorer and Bayesian optimization, and demonstrate examples of their application in the manufacturing industry. 【Overview】 First half: Utilization of t-tests in the manufacturing industry and simulation of required data numbers We will explain the overview and examples of t-tests, which are used for various purposes in the manufacturing industry, and present analysis examples using JMP. Additionally, we will introduce a method to simulate the relationship between the required data numbers for t-tests and statistical power using the sample size explorer. Second half: How to utilize JMP Pro Bayesian optimization – Application to simulation experimental data The Bayesian optimization platform is originally designed for experimental data that includes measurement errors, but there is also a strong demand to apply it to simulation experimental data that does not contain errors, such as CAE. In this seminar, we will introduce approaches for utilizing Bayesian optimization with simulation experimental data.