[New Product] Low Price! Ultra Lightweight! Introducing the 12kg Portable 6-Axis Robot MZ12

The new product robot MZ12 from Nitto Seiko can carry 12 kg, yet it is compact and fast! It achieves a 29% weight reduction compared to conventional products and comes at a reasonable price!

The new 6-axis robot 'MZ12' from Nitto Seiko features a slim and lightweight arm structure combined with powerful and high-speed performance. It achieves a 17% reduction in base size and a 29% reduction in body weight compared to conventional 12kg payload robots. The operating range is equal to or greater than that of previous models. It can handle a variety of tasks such as loading, transportation, assembly, and packaging. Additionally, the reasonable pricing of the unit makes it easy to introduce. 【Features】 ■ Lightweight & Slim ■ Dust and drip-proof equivalent to IP67 ■ Rust-resistant and coolant-resistant coating as standard ■ All cables and motors are integrated within the arm ■ A wide range of applications included as standard *For more details, please refer to the catalog or feel free to contact us.

• others

【Robot Introduction Case Study Giveaway!】We offer on-site demonstrations and proposals for robot systems to customers who want to try or see robots!

Kyoni Corporation is a key distributor of robots manufactured by NACHI, and we have established a dedicated robotics team within the company to propose optimal robotic systems. For customers who have no experience with robot implementation but wish to try it out... and want to achieve efficiency and automation... we offer a free on-site demonstration of NACHI's low-cost, compact, high-speed robot 'MZ04', which significantly contributes to productivity improvement. Along with the demonstration, we will also introduce case studies and propose robotic systems. 【Features】 ■ Class-leading operating speed In the 4kg payload class, it boasts the highest operating speed compared to other manufacturers, enhancing productivity. ■ Lightweight and compact with wide operational performance The installation area is equivalent to A5 size, contributing to downsizing of equipment. ■ Wiring routing with hollow wrist The wiring is housed in the hollow wrist, allowing entry into narrow spaces. ■ Cost competitiveness Achieves overwhelming cost reduction compared to other manufacturers. ■ Low-output type that does not require safety fences is also available The 80w low-output type promotes collaboration with humans without the need for safety fences. *Case study collection can be downloaded from the link below. *Please feel free to contact us if you would like a demonstration.

• others

Pursuing high-speed operation! A compact robot that meets all needs in the production site at a reasonable price.

The "MZ07" by Nitto Seiko is a lightweight, compact robot that contributes to a significant increase in productivity due to its speed specifications, making it one of the fastest in the world. The risk of interference with peripheral wiring devices has been reduced, enhancing its applicability and making it easier to access narrow areas. In addition to standard specifications, it offers a wide range of applications to meet various needs in production environments, including visual specifications, additional axis specifications, and force sensor specifications. Moreover, the reasonable pricing of the main unit makes it easy to introduce. 【Features】 ■ High-speed operation ■ Hollow wrist for wiring routing ■ Extensive application compatibility ■ Packed with user-friendly features *For more details, please refer to the catalog or feel free to contact us.

• others

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition mainly in the BtoB (business-to-business) sector. On September 23, 2025 (Tuesday), they published a page titled "Easier to Optimize the Allocation of Management Resources!? 'Product Portfolio Management (PPM)'". 'Product Portfolio Management' allows for the optimal allocation of management resources by evaluating one's business along two axes: "market growth potential" and "market share," and classifying it into four quadrants. The page explains the benefits that can be realized by utilizing it, the two axes and four quadrants that make it up, and the associated risks. (Page Overview: Excerpts) ■ What is 'Product Portfolio Management'? ■ What can be achieved through 'PPM'? ■ Components of 'PPM' (vertical and horizontal axes) ■ Components of 'PPM' (four quadrants) ■ Two risks associated with 'PPM' (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/ppm-2025-09/

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK