Exhibiting at the International Secondary Battery Expo (Tokyo Big Sight) from February 28 ◆ Showcasing the Filmix® electrode material dispersion device for lithium-ion batteries, fuel cells, and all-solid-state batteries, as well as the continuous production technology CDM process for electrode material slurries. Free seminars will also be held at the venue!

[Video available] High stability electrode material slurry production is possible! A mixer for nanoparticle dispersion that achieves a sharp particle size distribution and micronization to nanometers.

Filmix® is a nanoparticle dispersion mixer (dispersion stirring device) that achieves sharp particle size distribution and micronization to nanometer sizes, which was difficult with conventional high-speed stirrers. It significantly shortens development time through emulsification and dispersion in seconds for battery device manufacturing, such as lithium-ion batteries and capacitors. The 56-L model is capable of both batch and continuous operation on a tabletop. Once the conditions are set for batch processing, continuous experiments can be conducted by assembling a line. This single unit can be compactly utilized from research and development to small-scale production! ◆◇━━━━━━━━━━━ 　　　Testing Now Available! ━━━━━━━━━━━━◇◆ If you have materials that are challenging for dispersion or homogenization, please give it a try! We are currently offering two booklets related to battery and fuel cell manufacturing as a gift! 　◎ 'Battery Device Countermeasures Booklet'　　 　◎ 'Booklet on Fuel Cell MEA Manufacturing' *If you would like to request a test or booklets, please feel free to contact us.

• others

Continuous manufacturing process and equipment for electrode slurry using Filmix® developed for dispersing electrode materials of lithium-ion batteries and fuel cells.

CDM stands for Continuous Dispersion Mixing, which is a continuous manufacturing process for electrode slurries using Filmix® developed for the dispersion applications of electrode materials in lithium-ion batteries and fuel cells. The nanoparticle design mixer (dispersion stirring device) Filmix® 56-L type is compatible with both batch and continuous processes. It can also be used by setting up a continuous line on a tabletop. ▼▼ Basic Procedure for Continuous Operation ▼▼ 1) Preliminary dispersion with a homodisperse or similar device 2) Transfer of the processing liquid with a pump 3) Dispersion with Filmix® ■ This single unit can be compactly used from research and development to small-scale production! ■ There are numerous successful scale-up cases from research machines to production machines! ◆◇━━━━━━━━━━ 　　Testing Now Available! ━━━━━━━━━━━◇◆ If you have materials that are problematic for dispersion or homogenization, please give it a try. We are currently offering two booklets related to battery manufacturing as a gift. 　◎ "Battery Device Measures Booklet"　　 　◎ "Booklet on Fuel Cell MEA Manufacturing" * If you would like to request a test or booklets, please feel free to contact us.

• others

Improving the quality of slurry and reducing manufacturing costs! Introducing continuous production technology for electrode material slurry using Filmix® (continuous processing in the kneading process).

Using the dispersing mixing device Filmix(R), active materials, conductive materials, solvents, and binders are uniformly dispersed in a short time. A slurry with high reproducibility of viscosity and excellent stability can be continuously produced. <Components of the CDM Process> ○ Pre-mixer ◎ Filmix(R) ○ Storage tank (conditioning tank) <Advantages of the CDM Process> ■ Produces high-quality slurry! ■ Reduces manufacturing time! ■ Cost reduction! (Compact factory, labor-saving) ■ Easy scale-up!

• others

An article about the resin-based lightweight formwork system "PERI DUO" has been published in the "Construction News" (November 7, 2025)! "PERI DUO" is a new system formwork made of resin that can be used for walls. It is made from a newly developed material called "Politec," which is high-strength and lightweight. With fewer components, it is easy to handle. It allows for increased reuse and is an environmentally friendly lightweight formwork that is flexible on the construction site! 【DUO Product Features】 ■ New system formwork made of resin ■ High strength and lightweight ■ Fewer components and easy to handle ■ 100% recyclable *For more details about this product, please feel free to contact us. PERI Japan Co., Ltd.

[To the owners of parking lots and parking lot construction companies] "I'm worried about not colliding with pedestrians when leaving the parking lot in my car..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Departure Warning Sensor] that detects vehicle departures using various sensors and alerts the surroundings with LED lights and buzzers. The device consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *Please note that a separate control panel including the controller and switching power supply (24V) is required when using the departure warning system. *We kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breakers, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. We hope this will contribute to safer vehicle passage for everyone. ◎ For more details, please contact us or download the catalog.

【New Product Announcement】 UV - Ultra-Compact Irradiator LSP26FUV Series Released High intensity yet compact, a palm-sized cube-type ultra-compact UV irradiator. It offers a variety of UV wavelengths and can be used for a wide range of applications. Due to its compact size that fits in the palm of your hand, it is very convenient for simple inspections and research experiments, as well as other small tasks. *Details about the product features and specifications are currently being prepared. They will be published soon, so please wait a little longer. For more information, please feel free to contact us.

Japan Aluminum Co., Ltd. will exhibit at the High-Performance Materials Week "Adhesive and Joining EXPO" ~Proposing solutions for joining aluminum and resin~ This exhibition is one of the events that make up the "High-Performance Materials Week," which features cutting-edge material technologies, and is one of the largest comprehensive exhibitions in Japan for adhesives, joining machines, and fastening technologies. The Japan Aluminum Group will showcase various functional surface treatments currently under development, focusing on the joining solution PAL-fit for aluminum and resin. We sincerely look forward to your visit and hope you take this opportunity to see our offerings. https://www.nikkeikinholdings.co.jp/news/news/p2025110501hd.html Event Dates: November 12 (Wed) to 14 (Fri), 2025 10:00 AM to 6:00 PM (Ends at 5:00 PM on the final day) Venue: Makuhari Messe Hall 7 (Chiba City, Chiba Prefecture) Our Booth: Hall 7, 42-26

In recent years, with the increasing push for DX (digital transformation) and valuable feedback from all users in the field, we will be fully renewing "Compass PLUS." The new Compass PLUS will leverage its traditional strengths while completely revamping its design, functionality, and usability, thereby further enhancing its value in practical use. The official release is as follows, so please wait a little longer until then. 1) Improved visibility and operability 2) Enhanced intuitiveness 3) Streamlined information sharing These are the main points of improvement, and it will be available starting December 16, 2025. For an overview of the renewal, please download the materials. We are also planning an online briefing session, so please download the materials for more details as well. Renewal date: Tuesday, December 16, 2025 Temporary suspension period: Monday, December 15, 2025, 17:00 – 19:00 *Due to the renewal, data updates for observation devices (wave height, weather, water level, noise and vibration) will be suspended during the temporary suspension period. However, viewing of forecast information and other various information will still be possible as usual.