[February 28 to March 2, 2018] Notice of Participation in the 6th International Wind Power Exhibition - WIND EXPO - [East 5: E37-39]

Suitable for wind power generation of 1.5MW to 3.5MW! A compact and lightweight gearbox specialized for rotary drive.

The "7TW Series" is a multi-layer reduction gear specialized for swivel drive. It further miniaturizes the existing yaw drive, and the new system for nacelle directional control is equipped with a brake for the inverter-controlled motor. This new design can be easily integrated into applications and has simplified maintenance. 【Features】 ■ Suitable for wind power generation from 1.5MW to 3.5MW ■ Miniaturization ■ Lightweight ■ Fewer components ■ Easy installation *For more details, please refer to the PDF document or feel free to contact us.

• Power generation equipment
• others

High torque capacity and a wide reduction ratio for high efficiency! Used by many wind power generation manufacturers.

The "700T Series" is a planetary gearbox used for pitch and yaw control in wind power generation systems. To increase the transmitted torque, each stage has 3 to 4 planetary gears, and to achieve high efficiency, the planetary gears are supported by roller bearings or roller track bearings. It is used by many major wind power manufacturers, demonstrating its performance. 【Features】 ■ Flange mounting ■ Output shaft with spline or pinion gear ■ Reinforced structure ■ High torque capacity ■ Output shaft supported by heavy-duty bearings *For more details, please refer to the PDF materials or feel free to contact us.

• Power generation equipment
• others

Achieving improved performance of the turning system, increased reliability, and reduced system costs!

Using an electric motor equipped with the "Agile Inverter" results in a significantly more space-saving design compared to conventional inverters that require separate electric motors for turning. Additionally, using a turning device equipped with the "Agile Inverter" improves the performance of the turning system, increases reliability, and reduces system costs. 【Features】 ■ Space-saving ■ Improved performance of the turning system ■ Reduced system costs ■ Power: 1.1 kW to 11 kW ■ Built-in EMC filter for simplified EMC compliance *For more details, please refer to the PDF materials or feel free to contact us.

• others

Application of a wind power generation swivel drive device! Compact sensorless inverter.

"Agile" is a compact type of sensorless inverter. It is used in applications such as the turning drive systems of wind power generation, which require simple starting, space-saving, and downtime prevention. 【Features】 ■ Compact ■ Control dedicated to open-loop drive ■ Asynchronous AC induction motor ■ Capable of driving a group of synchronous AC permanent magnet motors without feedback ■ Integrated safety design *For more details, please refer to the PDF materials or feel free to contact us.

• others

Adjustable brake torque! Inverter specification AC motor compliant with IEC standards.

The "BE Series" complies with all international standards, including EMC and LV directives, and meets IEC 60034-30:2008 (efficiency class) for AC motors. Output is available in the range of 0.75 - 22 kW, with mounting options in foot and flange styles. The flange style has settings for IM B5 and IM B14. A single shaft version is available, and there are two brake options for one type of DC motor and one type of AC motor. 【Features】 ■ Compliant with IEC ■ Inverter specification ■ Output range of 0.75-22 kW ■ Protection class IP54-IP55 ■ Adjustable brake torque *For more details, please refer to the PDF materials or feel free to contact us.

• others

Adjustable brake torque! Inverter specification electric motor compliant with IEC standards.

The "BN Series" is an electric motor for gear reducers that complies with IEC standards. There are two mounting methods: foot-mounted and flange-mounted, with flange-mounted options available for "IM B5" and "IM B14." Both single and dual polarity versions are possible, and there are three types of brake options for one type of DC motor and two types of AC motors. 【Features】 ■ Mounting methods: foot-mounted and flange-mounted ■ Inverter specifications ■ DC and AC power ■ Adjustable brake torque ■ Output range: 0.25 kW to 30 kW *For more details, please refer to the PDF document or feel free to contact us.

• others

Sekisui Filler Co., Ltd. will be exhibiting at the "Automotive Technology Exhibition 2026 YOKOHAMA" held at PACIFICO YOKOHAMA from May 27. (Booth number 285, within the Sekisui Chemical booth) 【Exhibited Products】 Mobility G - Re-sealable gasket HM (EV Seal 500) - Interior materials (Thermonex/Swiftlock) - Battery protection materials (EV Protect 4006SFR, etc.) Electronics / Car Electronics - Adhesives for camera modules - Adhesives for displays - Conformal coating agents - Optical adhesives We sincerely look forward to your visit.

Palmholtz Co., Ltd. will be exhibiting at the "AXIA EXPO 2026" held at Aichi Sky Expo (Aichi Prefectural International Exhibition Center). Our company possesses unique new technologies that transform oil palm trunks (Oil Palm Trunk = OPT), which have been treated as unused resources due to their lack of strength and value as building materials, into wood-based products such as building materials and furniture. The oil palm, which produces a large amount of edible oil, leaves the trunks unused and discarded after the oil is extracted. It is estimated that the amount of discarded trunks is 20 million tons per year in both Malaysia and Indonesia. This project involves peeling and drying the unused oil palm trunks to create veneer, which is then layered and compressed under high temperature and pressure to manufacture and sell exterior materials. We showcased a bench as a reference exhibit at the Malaysia Pavilion during the 2025 Osaka Expo. We sincerely look forward to your visit.

Kawasaki Corporation (Headquarters: Tokyo) is pleased to announce that it will participate in the interim report meeting for the Tokyo Metropolitan Government's "Decarbonization Support Project in the Supply Chain for the Creation of a Green Products Market," which will be held on May 20, 2026. At this meeting, we will present the CO2 reduction effects of our environmentally friendly plastic formwork "Daiko Panel," which we have conceived, developed, manufactured, and sold, along with our initiatives towards greening, including related auxiliary materials. [Overview of the Presentation] Theme: Utilizing CFP to enhance CO2 reduction of "Daiko Panel" and promote greening throughout the entire supply chain. Main Content: Introducing initiatives aimed at CO2 reduction, referencing the background of our application for this project and the CFP calculation results for "Daiko Panel" and its auxiliary materials. [Presentation Date and Time] Interim report meeting: May 20, 2026 (Wednesday) from 15:00 to 17:00 Details of the interim report meeting and the Tokyo Metropolitan Government's project: Decarbonization support in the supply chain for the creation of a green products market https://www.cfp-sc.metro.tokyo.lg.jp/

TESSHA Corporation will be exhibiting at 'FOOMA JAPAN 2026' held at Tokyo Big Sight. This exhibition covers various fields of food manufacturing and is one of the largest comprehensive food manufacturing exhibitions in the world, where advanced technologies and knowledge come together. We plan to showcase our "Small Catalytic Deodorization Device SCU-1EH type." We look forward to your visit.

Rentama Co., Ltd. will be exhibiting at the "8th International Construction and Surveying Exhibition (CSPI2026)" held at Makuhari Messe. A wide range of cutting-edge products, technologies, and services from the evolving industries of construction machinery, heavy equipment, attachments, construction DX, and i-Construction will be gathered in one place. This is one of the largest exhibitions in Japan for professionals in the construction and surveying industries to gather for business discussions, advanced information gathering, and problem-solving. This is a valuable opportunity to see KEMROC products up close. We understand you may be busy, but we invite you to stop by our booth. We look forward to meeting everyone.