The world's most reliable and best-selling SSD, a smartphone-specific shredding shredder, uniquely certified by major global standards such as NSA, NIST, DoD, and DIN.

SSD Shredder Flash EX completely prevents information leakage by crushing SSDs and smartphone IC chips into extremely small pieces.

The SSDs equipped with a large amount of flash memory and smartphones require physical destruction of the IC chip to completely erase data, but it is possible to completely prevent information leakage by shredding them. Flash EX is a highly reliable compact SSD shredder that meets very strict standards worldwide. The items to be shredded include SSDs, smartphones, USB memory, SD cards, CDs/DVDs, and credit cards, with shredding resulting in particles as small as 4 x 15 mm. The shredder has a control panel on the top, making it easy to use. Additionally, there is a window in the media feed slot that allows users to check the shredding status, providing peace of mind. In data centers, there is a shift to high-speed, long-lasting, and energy-efficient SSDs for server storage, and shredding is always required when replacing these SSDs, making this shredder essential. Support for Windows 10 will end on October 14, 2025, leading to a predicted increase in demand for computer replacements, necessitating the destruction of SSDs for laptops. The SSD shredder Flash EX will also be indispensable for data erasure and destruction service companies, as well as mobile data erasure and destruction service providers.

• others
• Firewall

A data erasure device for HDD, SSD, and SAS that can erase at a rate of 18GB per minute while keeping the mount attached, with no license fees and no internet connection required.

SAS, SSD, SAS data erasure device Jet Eraser 8-port model HDE-GT series HDE-GT800. 1. Over 30GB per minute ultra-fast data erasure, 2. Data erasure for SAS, SSD, and HDD, 3. All ports are independent and asynchronous, allowing for efficient work as drives with faster speeds or smaller capacities can be swapped out when finished, 4. Ability to terminate operations on faulty drives midway, 5. No need to remove the mount, 6. Erasure modes: Quick Erase, Full Erase, DoD Erase, DoD Erase with Compare, Seven Pass Erase, Secure Erase, NSA Erase, 7. Log saving capability, 8. PC link function, 9. A wide range of optional adapters to support various interfaces.

• others
• Security Assessment
• Firewall

No license fee required, no internet connection needed, can be used with the mount attached, and can leave a deletion log; 18GB per minute HDD, SSD, and SAS data erasure device.

SAS, SSD, SAS data erasure device Jet Eraser HDE-GT400 4-port model. 1. Over 30GB per minute ultra-fast data erasure, 2. Data erasure for SAS, SSD, and HDD, 3. All ports are independent and asynchronous, allowing for efficient operation as the next drive can be swapped in when a faster HDD or a smaller capacity HDD finishes first, 4. Ability to terminate the operation of faulty drives midway, 5. No need to remove the mount, 6. Erasure modes: Quick Erase, Full Erase, DoD Erase, DoD Erase with Compare, Seven Pass Erase, Secure Erase, NSA Erase, 7. Log saving capability, 8. PC link function, 9. A wide range of adapter options to support various interfaces.

• Other security systems
• others
• Firewall

No license fee required, no internet connection needed, can be used with the mount attached, capable of high-speed erasure at 18GB per minute while leaving a deletion log, HDD and SSD erasure device.

Our company has planned and developed the groundbreaking data erasure device MTS-SAS for SAS, SSD, and SATA. 1. Over 18GB per minute ultra-fast data erasure, 2. Supports SAS, SSD, and HDD, 3. All ports are independent and asynchronous, allowing for efficient work as drives with faster speeds or smaller capacities can be swapped out once they finish, 4. Ability to terminate operations on defective drives midway, 5. No need to remove the mount, 6. Erasure modes: Quick Erase, Full Erase, DoD Erase, DoD Erase with Compare, Seven Pass Erase, Secure Erase, NSA Erase, 7. Log saving capability, 8. PC link function, 9. A wide range of optional adapters to support various interfaces.

• others
• Firewall

An electric device that physically destroys HDDs with 12 tons of hydraulic power and 4 destruction bits. By swapping the destruction tool, it is also possible to destroy SSDs and magnetic tapes.

1. Simple operation that allows physical destruction by simply inserting the recording medium into the main unit and pressing the start button. 2. Destruction power of up to 12 tons. 3. Utilizes hydraulic power, enabling high-power destruction of HDDs. 4. With just one main unit, various destruction tools can be exchanged to enable physical destruction of SSDs and magnetic tapes (world's first). 5. Creates four holes in the HDD during a single destruction process, destroying the recording surface platter. 6. Even if the destruction bit (pin) is damaged or worn, it can be easily replaced, allowing for continued work with peace of mind. 7. Unique feature that prevents the destruction shaft from becoming dislodged after destruction. 8. Capable of battery operation in locations without power, enabling on-site destruction work (world's first).

• Security Assessment
• Firewall

With 12 tons of hydraulic power, it can physically destroy HDDs and SSDs, and even if the cutting bits are damaged or worn, they can be easily replaced. It is also capable of destroying magnetic tapes.

1. Simple operation by just inserting the recording medium into the main unit and pressing the start button. 2. Destructive power of up to 12 tons. 3. Uses hydraulic power, enabling the destruction of HDDs and SSDs with high power. 4. With just one main unit, various destruction tools can be exchanged to physically destroy HDDs, SSDs, and magnetic tapes (world's first). 5. SSDs are bent to physically destroy the internal semiconductor IC chips. 6. Even if the destruction bit at the tip is damaged or worn, it can be easily replaced, allowing for continued work with peace of mind. 7. Can be battery-operated in locations without power, enabling on-site destruction work (world's first).

• Other security systems
• Security Assessment
• Firewall

An electric physical destruction device that cuts LTO and other magnetic tapes with 12 tons of hydraulic power and cutting blades. By replacing the destruction tool, it is also possible to destroy HDDs and SSDs.

1. Simple operation by just inserting the recording medium into the main unit and pressing the start button. 2. Destructive power of up to 12 tons. 3. Uses hydraulic power, enabling high-power magnetic tape cutting. 4. By exchanging various destruction tools on a single main unit, physical destruction of HDDs and SSDs is also possible (world's first). 5. Even if the cutting and destruction blade is damaged or worn, it can be easily replaced, allowing for continuous work with peace of mind at any time. 6. Battery operation is possible even in places without power, enabling on-site destruction work (world's first).

• Security Assessment
• Firewall

An electric destruction device capable of physically destroying HDDs and SSDs with 12 tons of hydraulic power. By simply changing the tool, it can also destroy magnetic tapes with one machine.

1. Simple operation that allows for physical destruction by just inserting the recording medium into the main unit and pressing the start button. 2. Destructive power of up to 12 tons. 3. Uses hydraulic power, enabling high-power destruction of HDDs and SSDs. 4. Creates four holes in an HDD and bends an SSD for physical destruction in a single operation. 5. With just a tool exchange on the main unit, physical destruction of magnetic tapes is also possible (world's first). 6. Even if the destruction bit at the tip is damaged or worn, it can be easily replaced, allowing for continued work with peace of mind. 7. Unique feature that prevents the HDD destruction shaft from becoming stuck after destruction. 8. Battery operation is possible even in locations without power, enabling onsite destruction work (world's first).

• Other security systems
• others
• Security Assessment

A manual device capable of physically destroying HDDs with 6 tons of hydraulic power and 4 destruction bits. By replacing the destruction tool, it can also destroy SSDs and magnetic tapes.

1. Simple operation by just inserting the HDD into the main unit and moving the handle up and down by hand. 2. Destructive power of up to 6 tons. 3. HDD destruction is possible with high hydraulic power. 4. Creates four holes in the HDD and destroys the HDD platter in a single destruction cycle. 5. By exchanging various destruction tools on a single main unit, physical destruction of SSDs and magnetic tapes is also possible (world's first). 6. Even if the destruction bit (pin) is damaged or worn, the tip bit can be easily replaced, allowing for continued work with peace of mind. 7. Unique feature that prevents the destruction shaft from becoming stuck after destruction. 8. Battery operation is possible even in places without power, enabling on-site destruction work (world's first).

• Entrance and exit control system
• Security Assessment

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

The signing methods for electronic contracts (party type and witness type) are directly linked to the strength of their legal effectiveness. In this article, we will outline the reasons why the more stringent "party type" has been difficult to popularize until now. ---【Conclusion of this article】-------------------------------- • There are two signing methods for electronic contracts: "witness type" and "party type," which differ in the strictness of identity verification. • The main reasons why the party type has not spread are the three factors of "effort, cost, and the structural risk of entrusting a private key." • However, with the spread of public personal authentication (JPKI) using My Number cards, these three barriers are beginning to crumble. -------------------------------------------------------- The full text of the article can be accessed from the "Related Links."

Seven Corporation has started offering the "SeveNavi AI Cleaning Diagnosis Service," which supports the organization and improvement of cleaning challenges in manufacturing environments. Organizing cleaning challenges with AI and visualizing the next steps In manufacturing cleaning, various factors need to be considered, including the material of the object, type of dirt, adhesion state, currently used cleaning agents, working time, safety, and equipment conditions. On the other hand, there are also several challenges faced on-site, such as: - Unable to determine if the current cleaning method is appropriate - Wanting to reduce cleaning time and labor - Concerns about the safety of cleaning agents and their impact on materials - Wanting to compare with another cleaning method but unable to set test conditions - Not being able to utilize past cases and knowledge for improvement activities SeveNavi organizes information such as the object, dirt, current cleaning methods, and site photos using AI, clearly presenting the applicability of cleaning methods, points of caution, missing information, and how to proceed with comparative testing. If you have any challenges regarding reviewing current cleaning methods, comparing new cleaning methods, or reducing cleaning time and labor, please feel free to consult with us.

An online seminar will be held for design, purchasing, and DX promotion personnel considering the introduction or switch to new CAD systems, featuring the DWG-compatible 2D CAD "ARES." Participants can review content directly related to business improvement, including a comparison of features and performance with AutoCAD, automation using the CAD-specific AI "A3," automatic generation of DWG drawings from BIM data, and new ways of working in the cloud. ■ Date and Time: September 17, 2026 (Thursday) 13:30 - 15:00 ■ Format: Online (with archive viewing available) ■ Participation Fee: Free ■ Recommended for: - Those considering switching from AutoCAD - Those interested in AI utilization and automation in CAD operations - Those looking to streamline collaboration with BIM - Those seeking an environment where drawings can be edited regardless of location As a viewing benefit, a free "ARES Trinity Utilization Manual" (worth 6,000 yen) will be provided. Additionally, if you apply through the URL in the related links, our company, Keynos Logic, will consistently support you from post-seminar implementation considerations to estimates and support after operation begins. If you are interested in ARES, feel free to start by participating in this seminar.

On August 28, 2026 (Friday), I participated in the "AMD Embedded Computing Summit Tokyo 2026" and showcased a "Gesture Demo" as a partner of AMD. The demonstration introduced a configuration that combines gesture recognition using OpenCV, status reporting with LLM, and one-axis motor control using INtime 7.2 and RSI-ECAT, enabling collaboration between AI, image processing, and real-time control on a single PC. We presented a next-generation PC-based industrial control system that integrates AI, image processing, and real-time control on one PC. <Overview of Demo Participation> https://www.mnc.co.jp/INtime/AMDxINtime/AMDEcsTokyoResults.html <Actual Demo Video> https://youtu.be/JmZke75_y0s <AMD CPU + INtime RTOS Introduction Page> https://www.mnc.co.jp/INtime/AMDxINtime/amdxintime.html #PC #RealTimeOS #IndustrialPC #AI