Announcement of the start of sales for the AC power type wireless LAN router with information outlet compatible with 11ac!

This is an application that enables centralized management, such as bulk firmware updates and simple health monitoring.

The centralized management software "FSW-CONFIG2" significantly improves the operational efficiency during the initial deployment and ongoing operation of network devices. When deploying a large number of the AE1000 series wireless access points in apartments or hotels, the centralized management software "FSW-CONFIG2" makes it easy to assign IP addresses and standardize device settings. After deployment, it allows for efficient bulk firmware updates, simple connectivity monitoring, and configuration changes. *For more details, please contact us or download the catalog to view it.*

• Internet System

Renewed with FAN-less design! PoE Gigabit Ethernet L2 switch equipped with PoE power supply scheduling function.

The FXC5210PE, which has been on the market for some time, has been renewed with a "fanless design"! The FXC5210PE is a full gigabit managed PoE switch equipped with 8 ports for 10BASE-T/100BASE-TX/1000BASE-T and 2 SFP slots. Its fanless design makes it an ideal switch for quiet environments such as hotels, offices, and hospitals. The FXC5210PE provides sufficient PoE power to wireless access points, IP phones, and other devices equipped with PoE receiving functionality, thanks to its compliance with IEEE802.3at PoE power supply, enabling an optimal network setup. Additionally, by setting a schedule, it can supply power only when necessary, allowing for efficient power distribution. With robust network features such as VLAN, QoS, and LACP, along with enhanced security functions like loop detection/blocking and IEEE802.1X authentication, it offers a cost-effective solution that can handle the dramatically increasing traffic on networks. ● For more details, please contact us or download the catalog.

• Audio equipment
• Internet System

PoE-powered Gigabit Ethernet L2 switch with scheduling function.

The "5218PE" is a full gigabit managed PoE switch equipped with 16 10BASE-T/100BASE-TX/1000BASE-T ports and 2 SFP slots. With IEEE802.3at compliant PoE power supply, it provides sufficient PoE power to devices such as wireless access points, IP cameras, and IP phones that have PoE receiving capabilities, enabling an optimal network. Additionally, by setting a schedule, it can supply power only when needed, allowing for efficient power supply. ◇Features 　○ Equipped with IEEE802.3at compliant PoE power supply function (up to 30W per port) 　○ Includes PoE scheduling function and PoE auto checking function 　○ Two SFP slots allow for the installation of optical modules (optional) 　○ Supports port trunking and LACP (IEEE802.3ad compliant) 　○ Supports STP (IEEE802.1d compliant), RSTP (IEEE802.1w compliant), and MSTP (IEEE802.1s compliant) ● For more details, please contact us or download the catalog.

• Audio equipment
• Internet System

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. This is recommended for making doors with touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Allows for face recognition along with mask detection and body temperature measurement simultaneously. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and notifies via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

[To the owners of parking lots and parking lot construction companies] "I'm worried about not colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, particularly at entrances facing sidewalks or roadways, there is a risk of dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures using various sensors and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "sensor" + "controller" + "switching power supply (24V)" + "LED rotating light." *Please note that a separate control panel is required to include the controller and switching power supply (24V) when using the exit warning system. *We kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breakers, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. We hope this will contribute to safer vehicle passage for everyone. ◎ For more details, please contact us or download the catalog.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

The "HM-S6" is an embedded park sensor that detects vehicles through changes in magnetic flux and responds to various situations from passing to stationary vehicles. It can be used for the opening and closing of input doors at waste treatment plants, as well as for gates that vehicles pass through and outdoor parking applications. It can also be installed on rebar and steel plates. 【Features】 ■ Resistant to the effects of natural environments such as rain, snow, temperature changes, and geomagnetism ■ Protection rating IP68 reduces the risk of water ingress ■ Ten times the load capacity compared to conventional embedded park sensors (based on our comparison) ■ Can distinguish between vehicles even when they pass continuously ■ Can be installed on rebar and steel plates *For more details, please refer to the PDF document or feel free to contact us.