To everyone in the Kansai region. Exhibiting at the Business Encourage Fair 2017.

Newly introduced for agriculture. A sturdy, lightweight, and low-cost base plate with excellent processability.

"Diban" is a protective mat specifically designed for the agricultural sector, made of wood-plastic composite. By using this product, you can protect farmland and allow access for vehicles and forklifts, as well as address high heel issues in tourist farms. The material used is wood-plastic composite, reinforced with wood fibers, making it sturdy yet easy to cut with a saw, boasting high workability. 【Features】 ■ Protective mat specifically for the agricultural sector ■ Sturdy, lightweight, and low-cost ■ Produced domestically with assurance (ISO 9001 certified) ■ Excellent water resistance and workability *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• plywood

93% reduction in carbon dioxide emissions! An alternative to steel plates and rubber mats! NEITS registered product.

The "W Board" is a resin-based ground board that can be used as an alternative to steel plates and rubber mats. Due to its lightweight nature, it can be set up by a small number of people in a short amount of time, significantly reducing transportation costs. It also improves safety by reducing crane work during unloading and other tasks. Additionally, its flexibility helps to reduce the noise associated with setup during transportation, which is a common issue with steel plates. 【Features】 ■ Registered with the Ministry of Land, Infrastructure, Transport and Tourism "NETIS" ■ Alternative to steel plates and rubber mats ■ Produced in a reliable domestic factory ■ Reduces noise during transportation and setup ■ Effectively utilizes renewable wood resources *For more details, please contact us or download the catalog.

• Secondary paving products
• Paving of sidewalks, roads, parking lots and stadiums

It is an environmentally friendly wood-plastic gravel fixing device.

The gravel fixing device "Sekisou Fit" suppresses the movement of gravel, maintaining a walkable and beautiful pavement. With a gently wavy box-like arrangement, it creates a varied design upon installation, and the interlocking waves make it difficult for lateral shifts to occur in the plane direction. The raw material, wood plastic, is a composite material made by mixing wood fibers with plastic. It effectively utilizes renewable wood resources and reduces carbon dioxide emissions. 【Features】 - Suppresses the movement of gravel - Maintains a walkable and beautiful pavement - Gently wavy box-like arrangement - Interlocking waves minimize lateral shifts in the plane direction - The product itself is curved, allowing for installation that adapts to the terrain's undulations For more details, please contact us or download the catalog.

• stone
• Paving Materials
• Secondary paving products

No need for water injection, installation takes just 15 seconds! Eco-friendly weights for signs made of wood-plastic composite.

"Omori-chan" is a weight made of wood-plastic composite that is compatible with A-frame construction signs wider than 280mm. Compared to traditional water-filled plastic weights, it eliminates the need for filling with water, significantly reducing installation time and greatly improving on-site work efficiency. The main material used is wood-plastic, a composite material reinforced with wood fibers, making it an environmentally friendly product. 【Features】 ■ Compatible with A-frame construction signs ■ Reduced installation time and improved work efficiency ■ Made of wood-plastic, environmentally friendly ■ NETIS registered product: KT-160037-A *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• others

93% reduction in carbon dioxide emissions! Alternative to steel plates and rubber mats! NEITS registered product.

The "W Board" is a resin-based ground board that can be used as an alternative to steel plates and rubber mats. Due to its lightweight nature, it can be set up by a small number of people in a short amount of time, significantly reducing transportation costs. It also improves safety by reducing crane work during unloading and other tasks. Additionally, its flexibility helps to reduce noise during transportation and setup, which is a common issue with steel plates. 【Features】 ■ Registered with the Ministry of Land, Infrastructure, Transport and Tourism "NETIS" ■ Alternative to steel plates and rubber mats ■ Produced in a reliable domestic factory ■ Reduces noise during transportation and setup ■ Effectively utilizes renewable wood resources *For more details, please contact us or download the catalog.

• Secondary paving products
• Paving of sidewalks, roads, parking lots and stadiums

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

The signing methods for electronic contracts (party type and witness type) are directly linked to the strength of their legal effectiveness. In this article, we will outline the reasons why the more stringent "party type" has been difficult to popularize until now. ---【Conclusion of this article】-------------------------------- • There are two signing methods for electronic contracts: "witness type" and "party type," which differ in the strictness of identity verification. • The main reasons why the party type has not spread are the three factors of "effort, cost, and the structural risk of entrusting a private key." • However, with the spread of public personal authentication (JPKI) using My Number cards, these three barriers are beginning to crumble. -------------------------------------------------------- The full text of the article can be accessed from the "Related Links."

Seven Corporation has started offering the "SeveNavi AI Cleaning Diagnosis Service," which supports the organization and improvement of cleaning challenges in manufacturing environments. Organizing cleaning challenges with AI and visualizing the next steps In manufacturing cleaning, various factors need to be considered, including the material of the object, type of dirt, adhesion state, currently used cleaning agents, working time, safety, and equipment conditions. On the other hand, there are also several challenges faced on-site, such as: - Unable to determine if the current cleaning method is appropriate - Wanting to reduce cleaning time and labor - Concerns about the safety of cleaning agents and their impact on materials - Wanting to compare with another cleaning method but unable to set test conditions - Not being able to utilize past cases and knowledge for improvement activities SeveNavi organizes information such as the object, dirt, current cleaning methods, and site photos using AI, clearly presenting the applicability of cleaning methods, points of caution, missing information, and how to proceed with comparative testing. If you have any challenges regarding reviewing current cleaning methods, comparing new cleaning methods, or reducing cleaning time and labor, please feel free to consult with us.

An online seminar will be held for design, purchasing, and DX promotion personnel considering the introduction or switch to new CAD systems, featuring the DWG-compatible 2D CAD "ARES." Participants can review content directly related to business improvement, including a comparison of features and performance with AutoCAD, automation using the CAD-specific AI "A3," automatic generation of DWG drawings from BIM data, and new ways of working in the cloud. ■ Date and Time: September 17, 2026 (Thursday) 13:30 - 15:00 ■ Format: Online (with archive viewing available) ■ Participation Fee: Free ■ Recommended for: - Those considering switching from AutoCAD - Those interested in AI utilization and automation in CAD operations - Those looking to streamline collaboration with BIM - Those seeking an environment where drawings can be edited regardless of location As a viewing benefit, a free "ARES Trinity Utilization Manual" (worth 6,000 yen) will be provided. Additionally, if you apply through the URL in the related links, our company, Keynos Logic, will consistently support you from post-seminar implementation considerations to estimates and support after operation begins. If you are interested in ARES, feel free to start by participating in this seminar.

On August 28, 2026 (Friday), I participated in the "AMD Embedded Computing Summit Tokyo 2026" and showcased a "Gesture Demo" as a partner of AMD. The demonstration introduced a configuration that combines gesture recognition using OpenCV, status reporting with LLM, and one-axis motor control using INtime 7.2 and RSI-ECAT, enabling collaboration between AI, image processing, and real-time control on a single PC. We presented a next-generation PC-based industrial control system that integrates AI, image processing, and real-time control on one PC. <Overview of Demo Participation> https://www.mnc.co.jp/INtime/AMDxINtime/AMDEcsTokyoResults.html <Actual Demo Video> https://youtu.be/JmZke75_y0s <AMD CPU + INtime RTOS Introduction Page> https://www.mnc.co.jp/INtime/AMDxINtime/amdxintime.html #PC #RealTimeOS #IndustrialPC #AI