The 25th Fluid Power International Exhibition IFPEX2017 has concluded【September 13 - September 15】. Exhibition information【East 4: F-40】.

The size is interchangeable due to compliance with ISO standards. The type that sets parameters via the fieldbus interface has real-time diagnostic functions.

The mounted digital driver controls the hydraulic pressure of the valve according to the command signal. The digital hydraulic equipment features high performance with over 20 types of alarms, compared to the analog system which only has diagnostic functions for fault signals. Additionally, due to the use of digital information that is less susceptible to noise, it has high resistance to electromagnetic noise. Explosion-proof specifications are also available. 【Features of Digital Hydraulic Equipment】 ■ More functions and parameters (e.g., linearization, PID) ■ High reproducibility and numerical soft setting ■ Enhanced diagnostic functions… open circuit detection, control monitoring, temperature range, etc. ■ Direct fieldbus interface 　… improved accuracy and durability, more information available 　… direct connection to the machine's communication network 　… CANopen / PROFIBUS DP / EtherCAT 【Specifications】 ■ Types: Directional control valve, pressure control valve, flow control valve ■ Sizes: 06, 10 (2-stage) 10 - 32 ■ Flow: Maximum 70–3500 L/min ■ Pressure: Maximum 350 bar

• others

Available in "General Steel," "SUS 316," and "Copper Alloy (Medium Pressure)." Widely used in Europe and America.

In addition to standard shut-off valves, there are various high-pressure products such as pressure-regulated valves and angle valves, which can be selected according to specifications. The materials include general steel and "high corrosion-resistant" stainless steel "SUS 316," as well as copper alloy products (for medium pressure) that can be used for hydraulic, water pressure, and air pressure applications. You can view a product overview catalog that summarizes the products handled by TOGNELLA and a catalog that details the SUS 316 products. ● If you would like to download the catalog now, please click "Download Catalog"! ◎ If you prefer a printed version, please contact us.

• stone
• others

Low noise and high heat exchange efficiency. Heat exchange equipment that can be used at high pressure.

This catalog features a wide range of heat exchange equipment, including water-cooled coolers (brazed plate type), air-cooled coolers (AC or DC motor-driven, hydraulic motor-driven), and cooling units! 【Features (excerpt) / Air-cooled type】 Maintains heat balance with excellent performance. When used in hydraulic systems, it offers the following advantages: - The cooling system is independent of the water supply line (no water required) - Higher initial investment compared to water-cooled types, but lower running costs - Can also be used for heating with warm air in winter, among others If you would like the catalog now, please click "Download Catalog"! For a printed version, please contact us. ――――――――――――――――――――――――― ■□ We will be exhibiting at the '2018 New Environmental Exhibition' □■ Exhibition Details ◎ "Fan Plate Oil Cooler" (by Sesino) ◎ "High-Pressure Hydraulic Valve" (by Tognella) We will showcase various hydraulic equipment from different manufacturers, focusing on the above items. Catalogs will also be distributed. Date: May 22 - May 25, 10:00 AM - 5:00 PM Location: Tokyo Big Sight (East Hall 4: U511)

• others

Non-spill type that contributes to the prevention of water quality pollution and soil contamination! It prevents oil from leaking externally during attachment and detachment, and allows for attachment and detachment even when there is residual pressure.

The "VEP-HD" allows for safe coupling and uncoupling even with high residual pressure due to its triple valve system. It also prevents external oil leakage during coupling and uncoupling. It is designed with heavy-duty, high-pressure hydraulic applications in mind, considering high repetitive peak pressures and significant mechanical stress. The "VEP-HD" is made from high-tensile carbon steel and features a nitrided surface treatment that reduces coupling wear. This series underwent one million impulse tests during its development. 【Features】 ○ The flat face is easy to clean and effectively reduces contamination intrusion into the system. ○ There is no external leakage of operating oil during coupling and uncoupling, reducing environmental impact. ○ Air entrapment during coupling and uncoupling is minimized, aiding in optimal system operation.

• Structural Materials
• others

For crushers, augers, drills, and more! The heavy-duty design "S" is the most powerful at 500kW among all series!

The "S" is designed for heavy-duty use to continuously deliver high output, with a maximum output of 500kW. Recommended applications include crushers, augers, drills, and winches, with options for two-stage shifting and freewheeling based on the application. 【Features】 ○ Easy to use as an industrial "shaft rotation type" ○ Tapered roller bearings capable of withstanding high radial/axial loads ○ Automatic switching multi-speed function suitable for many applications

• others

Compact and lightweight hydraulic manifold block. An excellent product that can handle high pressure and environmental conditions.

TSB (TOHTO System Block) is TOHTO's original hydraulic valve control block. The concept is "miniaturization and lightweight design" of hydraulic systems. We provide a one-stop service from design, processing, assembly to operational testing. Custom manufacturing is available for each specification and circuit diagram. The following are the main manufacturers we handle: *We also handle many other manufacturers beyond those listed below.* - Delta Power - Danfoss - Sun - Bosch Rexroth Oil Control - Tecnord - Atos - Bieri - Brevini - Deltrol - Wandfluh - Walvoil

• others

We will be exhibiting at the "62nd JAPAN DIY HOMECENTER SHOW 2026." This year, the largest exhibition in the industry will be held with the theme "Let's Go to the DIY Festival in Summer!" Please be sure to visit our booth (No. M31). ■ Introduction of Exhibited Product: Insulation Material "SS Premier" We are introducing "SS Premier" with the concept of moving away from the existing 20mm thick insulation materials. [The secret of 5mm. Maintaining performance while being overwhelmingly thin, light, and easy to install.] - Achieves insulation performance equivalent to RW50mm with a thickness of just 5mm, making it possible to install in limited spaces. - As a sheet material, it can accommodate both round and square ducts. - Lightweight and flexible, making transportation and handling easy, reducing the burden on the job site. Compared to conventional products, it offers advantages in installation space, transportability, and retail display. It has numerous implementation records across the country, including government projects such as the Shibuya Ward Office reconstruction project, as well as universities, hospitals, and large-scale new construction projects. At the venue, you can take a look at actual product samples. All of our staff are sincerely looking forward to your visit at booth No. M31.

Kou Alpha X Co., Ltd. will be exhibiting at the "Automatic Identification Comprehensive Exhibition" held at Tokyo Big Sight. At our booth, we will showcase a wide range of products, including metal-compatible RFID tags (PMT series), "keychain-type tags," and "rugged, environment-resistant tube tags." We look forward to your visit.

North Engineering, the Taiwanese agent of Tokkyo Kiki Co., Ltd., will exhibit at the international exhibition "SEMICON TAIWAN 2026" held in Taiwan. At "SEMICON Taiwan," we will showcase products for micro-vibration and magnetic field countermeasures for semiconductor manufacturing plants, as well as seismic isolation devices for transformers and vibration-damping devices for air conditioning outdoor units as earthquake countermeasures. Event Dates: September 2 (Wednesday) - September 4 (Friday), 2026 Venue: Taipei Nangang Exhibition Center (TaiNEX Hall 1 & 2, Taipei City, Taiwan) Booth Number: K2568 (TaiNEX 1, 1st Floor)

"I don't have anyone in the company to ask if this is the right way to segment." "I can't decide whether it's okay to delete the scenarios set up by my predecessor." I often hear such voices from those in charge of operating MA tools. In this seminar, Shannon, as an MA vendor, will publicly share how they operate MA within their own marketing department, using the actual management screen. Please note that this seminar will not be recorded or archived. It will be presented only to the 15 companies that attend in person. [Screens to be viewed on the day] (tentative) 1: Conditions for segmentation 2: Flow and branches of scenarios 3: Discarded settings [Recommended for those who] - Are almost solely responsible for operating MA tools - Have not been able to make changes to the settings inherited from their predecessor - Feel that they are not using MA as they had originally intended - Want to know how other companies are actually operating at the screen level - Are considering reviewing their current MA tools

Our manufacturer, Shirok, will be exhibiting at the High-Performance Materials Week Tokyo Exhibition held at Makuhari Messe, with participation from Kō Alpha X Co., Ltd. We plan to showcase various silicone products, including silicone prepolymers, at our booth. We sincerely look forward to your visit. Register for attendance here: https://www.material-expo.jp/tokyo/ja-jp/register.html