Notice of Participation in the Construction Technology Fair in Chubu

By simply taking photos of the site with a digital camera, it is possible to diagnose cracks and defects! You can reduce investigation costs for scaffolding, on-site surveys, and administrative tasks!

Chubu EEN conducts digital image diagnosis and analysis that can assess the exterior walls of buildings, bridge decks, and road pavements using images captured by general digital cameras. Traditional inspection methods incurred costs due to the need for scaffolding setup, prolonged on-site investigations, and administrative work, but with Chubu EEN, these costs can be reduced! If you send us photos taken with a digital camera on-site, we can conduct inspections for cracks and defects on your behalf. The inspection accuracy is registered with the New Technology Information System (NETIS). **Reasons to Choose This Product** ■ By simply photographing the inspection points, we reduce on-site investigation time and eliminate the need for scaffolding, leading to lower investigation costs and improved safety. ■ High accuracy is achieved through image diagnosis by numerous experts! ■ Digitalization of records allows for precise observation and management of long-term changes. ■ Collaboration with infrared images and other technologies enables accurate deterioration assessments (composite diagnosis possible for cracks, delamination, water leakage, peeling, exposed rebar, free lime, etc.). *Note: Various conditions, such as image quality, are required for photos suitable for analysis. *For details on diagnosis and analysis, please download the PDF or feel free to contact us.

• Analysis and prediction system
• Construction and process management software

Diagnosis and analysis using images taken by drones is also possible. Achieving higher-level and more accurate analysis!

The Central EEN can analyze and diagnose images captured by drones. It can perform analysis in high locations where scaffolding is difficult to set up. This page introduces examples of cracks and defects on highways. The captured images are converted into orthophotos, mapping the deterioration of bridge piers. **Features** - By simply capturing the inspection points, it reduces on-site investigation time and eliminates the need for scaffolding, leading to lower investigation costs and improved safety. - High accuracy is achieved through image diagnosis by numerous experts! - The digitization of records allows for precise observation and management of changes over time. - Collaboration with infrared images and others enables accurate deterioration assessments (composite diagnosis possible for cracks, delamination, leaks, exposed rebar, free lime, etc.). *For more details, please download the PDF or feel free to contact us.*

• Construction and process management software

Just by taking pictures of the site with a digital camera, it is possible to diagnose cracks and defects! With infrared diagnostics, precise diagnosis is possible through the analysis of temperature changes!

Chubu EEN conducts digital image diagnosis and analysis using images taken with general digital cameras, enabling the assessment of building facades, bridge decks, and road pavements. ★ Precise diagnosis is possible by combining infrared diagnostic images! By observing temperature changes, we can perform more accurate crack and defect assessments. If you send us photos taken with a digital camera from the site, we can conduct inspections for cracks and defects on your behalf! Our inspection accuracy has received high praise from the Ministry of Construction, leading to reductions in investigation costs and time! *For more details, please download the PDF or feel free to contact us.

• Analysis and prediction system
• Construction and process management software

Just by taking pictures of the site with a digital camera, it is possible to diagnose cracks and defects! Even in curved sections like tunnels, images can be converted to orthographic projections for diagnosis!

Chubu EEN conducts digital image diagnosis and analysis using images captured by general digital cameras, enabling the assessment of building facades, bridge decks, and road pavements. ★Currently, it also accommodates curved surfaces such as tunnels! By applying corrections, the images can be transformed into orthographic projections, making diagnosis possible. If you send us photos taken with a digital camera on-site, we can conduct inspections for cracks and defects on your behalf! The accuracy of our inspections has received high praise from the Ministry of Construction, leading to reductions in investigation costs and time! *For more details, please download the PDF or feel free to contact us.

• Analysis and prediction system
• Construction and process management software

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

From measurement instruments to point cloud processing and analysis software, the latest solutions come together! We propose numerous cutting-edge technologies and products that solve on-site challenges in a one-stop manner. It's not just about seeing; it's about experiencing, consulting, and bringing it back to the field. At the venue, we will showcase the latest measurement instruments and solutions, including 3D laser scanners, handheld 3D scanners, LiDAR drones, and 3DGS (Gaussian Splatting). Additionally, we will announce surprise new products!

We have updated the article on the website of the semi-custom system construction "Select Beam." When planning factories, logistics warehouses, and stores, "system construction" has become an effective means of achieving cost reduction and shortening construction periods. The rationality of system construction through thorough standardization is very high, and it is adopted in many projects. However, due to the differing characteristics of each manufacturer, many business owners find themselves wondering, "Which manufacturer is suitable for our plans?" and "Is it really optimal compared to conventional methods?" In this article, we will compare and introduce the basic knowledge of the advantages and disadvantages of system construction, as well as recommend manufacturers by purpose in a ranking format. ■ Semi-Custom System Construction "Select Beam" This is a unique method by Sakura Structure, and it is a "third option" that is less expensive than system construction. It is the most suitable method for low-rise long-span buildings such as stores, warehouses, factories, and logistics facilities, as well as high-rise buildings like hotels.

"Because the ground is poor, we have no choice but to use a structural slab." Such fixed notions of "over-design" unnecessarily drive up construction costs. In large space buildings such as warehouses, factories, and stores, the choice of floor slab type is one of the most significant variables affecting construction costs. What is important is to compare and verify the advantages and risks of each type, and to derive the optimal solution that is "suitable for the purpose" for the entire building. By reading this content, you will understand the following points: - Characteristics of the five main construction methods with different support forms - Recommended situations for adoption - Cost comparison examples of floor slabs "I am struggling with the dilemma of floor settlement risks and costs on weak ground." "I want to know the optimal solution for the site without being tied to a specific construction method." Construction companies and general contractor representatives facing such issues are encouraged to take a look.

Our company will be exhibiting at the "Hokuriku Technology Exchange Techno Fair 2026." Dates: October 23rd, 10:00 AM - 5:00 PM October 24th, 10:00 AM - 4:00 PM Venue: Fukui Prefectural Industrial Hall We look forward to your visit.