Seiko and Electric Co., Ltd. Obtained Certification as an Industrial Standardization Registration Testing Organization (JNLA)

Meets protection rating IP55! Achieves top-class efficiency in waterproof LED lighting fixtures with a unique energy consumption efficiency of 146 lm/W!!

New Release of Damp-Proof and Waterproof LED Lighting Fixtures (LYAA and LYBA Series) The damp-proof and waterproof LED lighting fixtures (LYAA and LYBA series) comply with protection class IP55, making them suitable for installation in indoor environments where dust is generated and in outdoor environments without roofs. The specific energy consumption efficiency is 146 lm/W (*1), achieving one of the highest energy efficiencies in the industry for waterproof LED lighting fixtures. Additionally, we offer a wide range of 160 models, allowing you to choose the most suitable model based on the installation location.

• Cord Pendant
• Waterproof, moisture-proof, explosion-proof lighting fixtures
• Lighting Planning

LED lighting suitable for use in explosive hazardous locations ZONE 1 and ZONE 2.

New Release of Explosion-Proof LED Lighting Fixtures (LZIB Series) Seiwa Electric Co., Ltd. has enhanced its lineup of LED lighting fixtures under the <Star Reds> series to meet diverse needs for energy-saving equipment implementation in factories and initiatives for the environment (Minamata Convention). We are pleased to announce that we will begin accepting orders on June 15 for the LZIB series of explosion-proof LED lighting fixtures and floodlights, which can be used in explosive hazardous areas Zone 1 and Zone 2, equivalent to mercury lamps (400W, 250W) that require high reliability. <Models> Explosion-Proof LED Lighting Fixture: LZIB1308 Series (Equivalent to 400W Mercury Lamp) LZIB1304 Series (Equivalent to 250W Mercury Lamp) Explosion-Proof LED Floodlight: LZIB13087 (Equivalent to 400W Mercury Lamp) LZIB13047 (Equivalent to 250W Mercury Lamp)

• Floodlight
• Waterproof, moisture-proof, explosion-proof lighting fixtures
• Lighting Planning

Reliability in explosion-proof areas is guaranteed, and glare reduction and high color rendering improve work efficiency! Compared to our conventional fluorescent fixtures, power consumption is reduced by approximately 55%!

Introducing the new explosion-proof LED lamp series, the 'LZBA series', designed to meet the high reliability required in explosion-proof areas and suitable for use in explosive hazardous locations Zone 1 and Zone 2! While equipped with high output equivalent to fluorescent lamps, we have achieved approximately 55% reduction in power consumption, from 91W to 40.5W compared to our conventional explosion-proof fluorescent fixtures. Additionally, we have reviewed the design of the LED module and housing, achieving a lightweight and compact form. With glare reduction and high color rendering (Ra83), it also contributes to improving the working environment. ★ Zone 1 (Class 1 location): Areas where explosive atmospheres may be generated during normal operation of plants, etc. ★ Zone 2 (Class 2 location): Areas where explosive atmospheres are not expected to be generated during normal operation of plants, etc., and even if they were to occur during abnormal conditions, they would only exist for a short time. 【Features】 ■ Three types to choose from (equivalent to 1-lamp and 2-lamp for FHF32W high output type, equivalent to FHF16W high output type) ■ Achieved approximately 27% weight reduction for 2-lamp use and approximately 21% for 1-lamp use compared to our conventional explosion-proof fluorescent fixtures ■ Size reduction of about 33% for the 1-lamp type *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Cord Pendant
• Waterproof, moisture-proof, explosion-proof lighting fixtures
• Lighting Planning

The first in the domestic industry: Emergency LED lighting equipment that can be used in explosion-proof areas. Certified by the Industrial Safety and Technology Association, approved by the Minister of Land, Infrastructure, Transport and Tourism, displaying the JIL mark.

The first in the domestic industry: Emergency LED lighting fixtures that can be used in explosion-proof areas Launch of explosion-proof emergency LED lighting fixtures (VZAA series) We have launched the first explosion-proof emergency LED lighting fixtures in the domestic industry that can be installed in explosion-proof areas where there is a risk of explosion or fire due to flammable gases or combustible liquids. Currently, emergency lighting fixtures defined by the Building Standards Act are limited to "incandescent lamps" and "fluorescent lamps," and the use of LEDs as emergency light sources has not been permitted. Therefore, while there have been LED emergency lighting fixtures that received certification based on the Minister of Land, Infrastructure, Transport and Tourism's certification system and passed the self-assessment of emergency lighting fixtures by the Japan Lighting Manufacturers Association, they could not be used in explosion-proof areas where there is a risk of explosion or fire. In response to the many requests for the use of LED as an emergency light source even in explosion-proof areas, we have developed explosion-proof emergency LED lighting fixtures that have passed type testing by the Japan Industrial Safety and Health Association, received certification from the Minister of Land, Infrastructure, Transport and Tourism, and display the JIL mark from the Japan Lighting Manufacturers Association, making us the first in the domestic industry to do so. Orders will begin on September 15, 2016. Since the JIL mark is affixed to the product, building confirmation procedures can continue to be carried out smoothly as before.

• Cord Pendant
• Waterproof, moisture-proof, explosion-proof lighting fixtures
• Lighting Planning

Explosion-proof LED lighting fixtures LZLA series, ideal for replacing incandescent lamps and circular fluorescent lamps in explosion-proof areas.

New Release of Explosion-Proof LED Lighting Fixtures (LZLA Series) Seiwa Electric Co., Ltd. has enhanced its lineup of LED lighting fixtures under the <Star Reds> series to meet diverse needs in the introduction of energy-saving equipment at various factories and initiatives for the environment (Minamata Convention). We are pleased to announce the addition of the new explosion-proof LED lighting fixtures "LZLA Series," which can be used in explosive hazardous areas Zone 1 and Zone 2, equivalent to incandescent lamps (100W, 200W) and high-output FHF32W (circular and compact fluorescent lamps). Orders will begin on May 15. The main body of the fixture employs aluminum die-casting, which excels in heat dissipation and lightweight design, allowing for effective heat dissipation measures. This increases the operating temperature range to -20°C to +50°C (compared to our conventional LED products, which are -20°C to +40°C) and enhances resistance to high-temperature environments. Additionally, it achieves a maintenance-free LED module lifespan of 60,000 hours while also possessing high durability and weather resistance.

• Waterproof, moisture-proof, explosion-proof lighting fixtures
• Lighting Planning

LED Road Lighting DELGA WNLA Series Road and Tunnel Lighting Equipment Specifications 2015 Edition Compliant

LED Road Lighting DELGA WNLA Series ● Complies with all design conditions of the Ministry of Land, Infrastructure, Transport and Tourism's LED Road and Tunnel Lighting Introduction Guidelines (Draft) ● Complies with the Road and Tunnel Lighting Equipment Specifications (2015 Edition) ● Currently applying for NETIS approval from the Ministry of Land, Infrastructure, Transport and Tourism ● Complies with NEXCO's Standard Specifications for LED Road Lighting Fixtures, Specification No. 15150 (July 2015) ● New Feature 1 Adjustable installation angle in three stages Equipped with Angle Adjust Adapter ● New Feature 2 Eliminates snow accumulation by removing heat dissipation fins Finless roof design ● Lightweight and Compact Industry-leading lightest weight of 9.0 kilograms Significantly reduced pressure contact area ● Energy-efficient and Long-lasting System lifespan of 60,000 hours (15 years if lit for 4,000 hours annually, maintenance-free except for cleaning) Achieves maintenance-free operation

• Dam construction
• Civil Engineering Company
• Lighting Planning

You can estimate the required number of units and brightness with your computer! Would you like to save time on lighting design?

The simple lighting calculation software "STAR LIGHTER" from Hoshi and Denki allows for easy lighting design. Additionally, it can calculate the number of fixtures and average illuminance for new installations or updates. It supports various indoor and outdoor lighting calculations, and it can also create horizontal illuminance distribution maps for a single fixture, thereby improving work efficiency compared to traditional methods. Please give it a try. 【Features】 - Capable of calculating the number of fixtures for indoor use - Easy creation of illuminance distribution maps - Conducts illuminance calculations for outdoor areas and creates horizontal illuminance distribution maps *For more details, please contact us or refer to the catalog. ---------------------------------------------------- You can also download it from our website. Please check it out below.

• Cord Pendant
• Waterproof, moisture-proof, explosion-proof lighting fixtures
• Lighting Planning

We have published an introduction document for the solution "Easy Commuting Expenses," which supports the efficiency of commuting expense management. This document clearly presents the features and benefits of "Easy Commuting Expenses," which enables centralized management of commuting costs, including train, bus, and private car commuting. It streamlines tasks that place a heavy burden on staff, such as determining commuting routes, calculating refunds for commuter passes, responding to fare changes, and managing payment histories, while supporting fair and appropriate commuting expense reimbursements. Additionally, it includes case studies based on the implementation results from over 650 companies nationwide, as well as the effects of cost reduction and operational efficiency. Companies considering a review of commuting expense management or business improvements are encouraged to take a look.

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

An article has been published regarding the case study of the attendance management system "KING OF TIME" implemented at Nichirei Industrial Co., Ltd. ~ In the case of Nichirei Industrial ~ The workload related to attendance management has decreased. With the transition from analog tasks to automated aggregation of working hours and granting of annual leave, we can now focus on our work with peace of mind. Particularly regarding the "punching method," we utilize fingerprint and facial recognition. By using biometric authentication, impersonation is not possible, and I believe the accuracy of attendance has significantly improved. Transparency has been ensured. 【Case Overview】 ■Challenges Before Implementation - Handwritten attendance sheets were used, resulting in input tasks to incorporate data into the payroll system. ■Key Points of Implementation - Systematization has reduced input tasks. Biometric authentication prevents impersonation. *For more details, please refer to the related links or feel free to contact us.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.