Notice of participation in the 25th Fluid Power International Exhibition IFPEX2017 from September 13 to September 15 [East Hall 4: F-40]

The size is interchangeable due to compliance with ISO standards. The type that sets parameters via the fieldbus interface has real-time diagnostic functions.

The mounted digital driver controls the hydraulic pressure of the valve according to the command signal. The digital hydraulic equipment features high performance with over 20 types of alarms, compared to the analog system which only has diagnostic functions for fault signals. Additionally, due to the use of digital information that is less susceptible to noise, it has high resistance to electromagnetic noise. Explosion-proof specifications are also available. 【Features of Digital Hydraulic Equipment】 ■ More functions and parameters (e.g., linearization, PID) ■ High reproducibility and numerical soft setting ■ Enhanced diagnostic functions… open circuit detection, control monitoring, temperature range, etc. ■ Direct fieldbus interface 　… improved accuracy and durability, more information available 　… direct connection to the machine's communication network 　… CANopen / PROFIBUS DP / EtherCAT 【Specifications】 ■ Types: Directional control valve, pressure control valve, flow control valve ■ Sizes: 06, 10 (2-stage) 10 - 32 ■ Flow: Maximum 70–3500 L/min ■ Pressure: Maximum 350 bar

• others

Available in "General Steel," "SUS 316," and "Copper Alloy (Medium Pressure)." Widely used in Europe and America.

In addition to standard shut-off valves, there are various high-pressure products such as pressure-regulated valves and angle valves, which can be selected according to specifications. The materials include general steel and "high corrosion-resistant" stainless steel "SUS 316," as well as copper alloy products (for medium pressure) that can be used for hydraulic, water pressure, and air pressure applications. You can view a product overview catalog that summarizes the products handled by TOGNELLA and a catalog that details the SUS 316 products. ● If you would like to download the catalog now, please click "Download Catalog"! ◎ If you prefer a printed version, please contact us.

• stone
• others

Low noise and high heat exchange efficiency. Heat exchange equipment that can be used at high pressure.

This catalog features a wide range of heat exchange equipment, including water-cooled coolers (brazed plate type), air-cooled coolers (AC or DC motor-driven, hydraulic motor-driven), and cooling units! 【Features (excerpt) / Air-cooled type】 Maintains heat balance with excellent performance. When used in hydraulic systems, it offers the following advantages: - The cooling system is independent of the water supply line (no water required) - Higher initial investment compared to water-cooled types, but lower running costs - Can also be used for heating with warm air in winter, among others If you would like the catalog now, please click "Download Catalog"! For a printed version, please contact us. ――――――――――――――――――――――――― ■□ We will be exhibiting at the '2018 New Environmental Exhibition' □■ Exhibition Details ◎ "Fan Plate Oil Cooler" (by Sesino) ◎ "High-Pressure Hydraulic Valve" (by Tognella) We will showcase various hydraulic equipment from different manufacturers, focusing on the above items. Catalogs will also be distributed. Date: May 22 - May 25, 10:00 AM - 5:00 PM Location: Tokyo Big Sight (East Hall 4: U511)

• others

Non-spill type that contributes to the prevention of water quality pollution and soil contamination! It prevents oil from leaking externally during attachment and detachment, and allows for attachment and detachment even when there is residual pressure.

The "VEP-HD" allows for safe coupling and uncoupling even with high residual pressure due to its triple valve system. It also prevents external oil leakage during coupling and uncoupling. It is designed with heavy-duty, high-pressure hydraulic applications in mind, considering high repetitive peak pressures and significant mechanical stress. The "VEP-HD" is made from high-tensile carbon steel and features a nitrided surface treatment that reduces coupling wear. This series underwent one million impulse tests during its development. 【Features】 ○ The flat face is easy to clean and effectively reduces contamination intrusion into the system. ○ There is no external leakage of operating oil during coupling and uncoupling, reducing environmental impact. ○ Air entrapment during coupling and uncoupling is minimized, aiding in optimal system operation.

• Structural Materials
• others

For crushers, augers, drills, and more! The heavy-duty design "S" is the most powerful at 500kW among all series!

The "S" is designed for heavy-duty use to continuously deliver high output, with a maximum output of 500kW. Recommended applications include crushers, augers, drills, and winches, with options for two-stage shifting and freewheeling based on the application. 【Features】 ○ Easy to use as an industrial "shaft rotation type" ○ Tapered roller bearings capable of withstanding high radial/axial loads ○ Automatic switching multi-speed function suitable for many applications

• others

Compact and lightweight hydraulic manifold block. An excellent product that can handle high pressure and environmental conditions.

TSB (TOHTO System Block) is TOHTO's original hydraulic valve control block. The concept is "miniaturization and lightweight design" of hydraulic systems. We provide a one-stop service from design, processing, assembly to operational testing. Custom manufacturing is available for each specification and circuit diagram. The following are the main manufacturers we handle: *We also handle many other manufacturers beyond those listed below.* - Delta Power - Danfoss - Sun - Bosch Rexroth Oil Control - Tecnord - Atos - Bieri - Brevini - Deltrol - Wandfluh - Walvoil

• others

Sekisui Filler Co., Ltd. will be exhibiting at the "Automotive Technology Exhibition 2026 YOKOHAMA" held at PACIFICO YOKOHAMA from May 27. (Booth number 285, within the Sekisui Chemical booth) 【Exhibited Products】 Mobility G - Re-sealable gasket HM (EV Seal 500) - Interior materials (Thermonex/Swiftlock) - Battery protection materials (EV Protect 4006SFR, etc.) Electronics / Car Electronics - Adhesives for camera modules - Adhesives for displays - Conformal coating agents - Optical adhesives We sincerely look forward to your visit.

Palmholtz Co., Ltd. will be exhibiting at the "AXIA EXPO 2026" held at Aichi Sky Expo (Aichi Prefectural International Exhibition Center). Our company possesses unique new technologies that transform oil palm trunks (Oil Palm Trunk = OPT), which have been treated as unused resources due to their lack of strength and value as building materials, into wood-based products such as building materials and furniture. The oil palm, which produces a large amount of edible oil, leaves the trunks unused and discarded after the oil is extracted. It is estimated that the amount of discarded trunks is 20 million tons per year in both Malaysia and Indonesia. This project involves peeling and drying the unused oil palm trunks to create veneer, which is then layered and compressed under high temperature and pressure to manufacture and sell exterior materials. We showcased a bench as a reference exhibit at the Malaysia Pavilion during the 2025 Osaka Expo. We sincerely look forward to your visit.

Kawasaki Corporation (Headquarters: Tokyo) is pleased to announce that it will participate in the interim report meeting for the Tokyo Metropolitan Government's "Decarbonization Support Project in the Supply Chain for the Creation of a Green Products Market," which will be held on May 20, 2026. At this meeting, we will present the CO2 reduction effects of our environmentally friendly plastic formwork "Daiko Panel," which we have conceived, developed, manufactured, and sold, along with our initiatives towards greening, including related auxiliary materials. [Overview of the Presentation] Theme: Utilizing CFP to enhance CO2 reduction of "Daiko Panel" and promote greening throughout the entire supply chain. Main Content: Introducing initiatives aimed at CO2 reduction, referencing the background of our application for this project and the CFP calculation results for "Daiko Panel" and its auxiliary materials. [Presentation Date and Time] Interim report meeting: May 20, 2026 (Wednesday) from 15:00 to 17:00 Details of the interim report meeting and the Tokyo Metropolitan Government's project: Decarbonization support in the supply chain for the creation of a green products market https://www.cfp-sc.metro.tokyo.lg.jp/

Rentama Co., Ltd. will be exhibiting at the "8th International Construction and Surveying Exhibition (CSPI2026)" held at Makuhari Messe. A wide range of cutting-edge products, technologies, and services from the evolving industries of construction machinery, heavy equipment, attachments, construction DX, and i-Construction will be gathered in one place. This is one of the largest exhibitions in Japan for professionals in the construction and surveying industries to gather for business discussions, advanced information gathering, and problem-solving. This is a valuable opportunity to see KEMROC products up close. We understand you may be busy, but we invite you to stop by our booth. We look forward to meeting everyone.

TESSHA Corporation will be exhibiting at 'FOOMA JAPAN 2026' held at Tokyo Big Sight. This exhibition covers various fields of food manufacturing and is one of the largest comprehensive food manufacturing exhibitions in the world, where advanced technologies and knowledge come together. We plan to showcase our "Small Catalytic Deodorization Device SCU-1EH type." We look forward to your visit.