Notice of Participation in JECA FAIR 2016 (64th Electrical Installation Industry Exhibition)

This is an operating transformer (operating transformer/power transformer) compliant with the standard JEC-2200(2014) for a maximum voltage circuit up to 6.9kV.

The lineup of fixed capacity includes 1kVA, 2kVA, 2.5kVA, 3kVA, and 5kVA as standard. The 1kVA model is available for immediate delivery (shipped within one week after order) at 6600V/110V, while the 2kVA to 5kVA models can be shipped within three weeks (with fuse and contact prevention plate (E) included). The standard price is 38,500 yen (excluding tax). If you are considering regular purchases, please be sure to inform us or your nearby dealer of this intention. Production location: Made in Japan (Kyoto)

• Substation equipment
• Power distribution and control panels
• Electrical Equipment Testing

This is a design-registered product for low-voltage circuit round window-shaped current transformers.

Starting from a minimum of 60A, the lineup can reduce the work of winding electric wires. It uses a heat-resistant ABS resin case for the exterior, making it lightweight and easy to handle. This series is primarily manufactured in accordance with JIS C 1731-1, but products can also be made according to overseas standards such as IEC upon request. Production locations: Made in China / Korea / Japan (Kyoto) Design registration number: 1402960

• Substation equipment
• Power distribution and control panels

Rated withstand current 12.5kA/0.125s and 12.5kA/0.25s current transformer JIS C 4620 (Appendix)

Current Transformers for Cubicle-Type High Voltage Receiving Equipment ECT-S12.5KA Series Common Specifications ■ Compliance Standards: JIS C 4620 (Appendix) ■ Rated Current: 10A/5A, 15A/5A, 20A/5A, 25A/5A, 30A/5A, 40A/5A, 50A/5A 75A/5A, 100A/5A, 120A/5A, 150A/5A, 200A/5A ■ Rated Load: 10VA or 25VA or 40VA ■ Rated Overcurrent Constant: n>10 ■ Rated Frequency: 50Hz/60Hz ■ Accuracy Class: 1.0/1PS ■ Rated Short-Circuit Current: (1) ECT-S12.5KA-A Series = 12.5kA/0.125s or 12.5kA/0.16s common (2) ECT-S12.5KA-B Series = 12.5kA/0.25s

• Substation equipment
• Power distribution and control panels

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

The "HM-S6" is an embedded park sensor that detects vehicles through changes in magnetic flux and responds to various situations from passing to stationary vehicles. It can be used for the opening and closing of input doors at waste treatment plants, as well as for gates that vehicles pass through and outdoor parking applications. It can also be installed on rebar and steel plates. 【Features】 ■ Resistant to the effects of natural environments such as rain, snow, temperature changes, and geomagnetism ■ Protection rating IP68 reduces the risk of water ingress ■ Ten times the load capacity compared to conventional embedded park sensors (based on our comparison) ■ Can distinguish between vehicles even when they pass continuously ■ Can be installed on rebar and steel plates *For more details, please refer to the PDF document or feel free to contact us.

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, or management: Are you facing any challenges with current issues or selecting the right sensors for parking management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Vehicle Detection Sensor Basic Guide This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document presents the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

【New Product Announcement】 Two new optional units have been added to the inspection compact line lighting (linear) LLRJ. The compact and versatile linear lighting can now also be used as a handheld type with a handle attachment. Since its release, the conventional linear lighting LLRJ series has received positive feedback for being "lightweight, compact, and easy to introduce." Now, two new optional units have been added to the lineup, in addition to the existing "1. Coaxial Downlight Unit." The new additions are "2. Handheld Unit" and "3. Slit Unit." This allows for even more flexible use according to different applications and work environments. Please take a look at the product detail page for the LLRJ series, which has enhanced versatility. ● Optional Units 1. Coaxial Downlight Unit 2. Handheld (vertical type, horizontal type) 3. Slit Unit *The image shows the handheld horizontal type.