New product for temperature sensing wire for monitoring abnormal temperatures of electrical wires installed on electrical equipment.

Monitoring and alarming of dangerous temperatures in various industries / New product for dangerous temperature alarm devices.

■Features of the Dangerous Temperature Alarm Device 1. Capable of monitoring and alarming various dangerous temperatures (80°C) across different industries. 2. Can be installed in areas where there is a risk of dangerous temperatures, allowing for monitoring, alarming, and remote reporting. 3. Continuously monitors various dangerous temperatures in different industries on a daily basis, enabling early detection and safe response. 4. An eco-friendly "Dangerous Temperature Alarm Device" that anyone can easily install with zero standby power. 5. A new type of "Dangerous Temperature Alarm Device" that combines an alarm panel with a temperature sensing wire (80°C). ◇Features of the Temperature Sensing Wire 1. Can directly sense temperature and emit signals through physical action without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. Can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 4. The shape memory alloy has permanent memory, is rust-free, and maintains its state once activated, allowing for long-term use. 5. This product meets the performance standards of fixed temperature detectors as specified by fire safety regulations (120 seconds). 6. Non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated; the activated location must be deleted and reconnected.)

• Alarm panel
• Substation equipment
• Power distribution and control panels

Optimal safety measures for abnormal temperatures in distribution board equipment / New product for distribution board alarm system

■Features of the Distribution Board Alarm System 1. The system is equipped with temperature sensing wires (80°C) wired into the distribution/control panel, allowing for monitoring and alarm of abnormal temperatures. 2. It continuously monitors the abnormal temperatures of the distribution/control panel equipment, enabling early detection and safe response. 3. Inspection and maintenance of the distribution/control panel equipment can be conducted reliably and safely. 4. This is the optimal "Distribution Board Alarm System" for safety measures against abnormal temperatures in distribution/control panel equipment. 5. It is a "Distribution Board Alarm System" that combines a compact alarm panel with temperature sensing wires (80°C). 6. This product meets the performance standards of type 1 fixed temperature detectors (120 seconds) as specified by fire safety regulations. ◆Features of the Temperature Sensing Wire 1. It can directly sense temperature and emit signals through physical action without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. It can be wired similarly to electrical wires. It can be used for both indoor and outdoor wiring. 4. The product integrates numerous shape memory alloys at equal intervals along the wire. 5. It is simple, easy to use, and highly accurate, utilizing eco-friendly technology with zero standby power through its switching function.

• Power generation equipment
• Power distribution and control panels

New product for temperature sensing wire for monitoring abnormal temperatures of electrical wires in electrical equipment.

■Features of Temperature Sensing Wires for Electric Cables 1. Attach temperature sensing wires for electric cables to the cables using spiral tubes or similar methods to monitor abnormal temperatures in the cables. 2. Attach temperature sensing wires for electric cables to control devices and load devices using plastic bonds to monitor abnormal temperatures in the equipment. 3. Detect abnormal temperatures in the electric equipment's cables, control devices, and load devices, preventing equipment damage and fires in advance. 4. Continuously monitor abnormal temperatures in electric equipment on a daily basis, ensuring reliable and safe maintenance management. 5. Allows for safety management of electric equipment even by individuals who are not electrical engineers. ■Characteristics of Temperature Sensing Wires for Electric Cables 1. Enables direct temperature sensing and signaling through physical operation without the need for power sources or measuring devices. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and send a signal. 3. Can be wired similarly to electric cables. Additionally, it can be used for both indoor and outdoor wiring.

• Power generation equipment
• Substation equipment
• Power distribution and control panels

New product of temperature sensing wire integrated with multiple temperature memory sensors.

■Features of Temperature Sensing Wire 1. It can directly sense temperature and generate signals through physical operation without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. It allows for routine monitoring of various abnormal temperatures, ensuring reliable and safe maintenance management. 4. It can detect abnormal temperatures in various devices early, preventing equipment damage and fires. 5. By simply extending the wiring, it can provide extensive monitoring of abnormal temperatures. 6. It can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 7. It is a product that integrates a large number of shape memory alloys at regular intervals along the extended wire. 8. Utilizing the softening of the wire and the recovery of the shape memory alloy, it senses temperature by short-circuiting the two wires and generates a signal. 9. It is a simple, easy-to-use, and accurate eco-technology product with zero standby power due to its switching function. 10. The shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated, allowing for long-term use. 11. It is a product that meets the performance standards of fixed-temperature type detectors as specified by fire safety regulations (120 seconds). 12. It is a non-resettable type that allows for confirmation after activation (once sensing is activated, it cannot be reactivated; the activated location must be deleted and reconnected).

• Facility Design

Detect abnormal temperatures in the distribution board / Temperature detection sensor for distribution boards

■Features of Temperature Detection Sensors for Distribution Boards 1. Continuously monitors and detects abnormal temperatures of electrical wires in the distribution board. 2. Continuously monitors and detects abnormal temperatures of power (control) equipment and electrical (load) equipment in the distribution board. 3. Inspection tasks for distribution board equipment can be performed by anyone, ensuring reliable and safe maintenance management. 4. Utilizes shape memory alloy (restoration) and electrical wires (softening) to create a short circuit (contact) between two wires, detecting abnormal temperatures (maximum allowable temperature) and generating a signal. [Set temperature: 80°C] 5. A simple, easy-to-use product with good accuracy, featuring eco-technology with zero standby power due to its switching function. 6. Capable of simultaneous temperature detection and signaling, with a simple circuit configuration (switching function) at a low cost. 7. Shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated. 8. Operates without the need for power, ensuring no malfunction and allowing for swift, precise use over many years. 9. Enables direct temperature detection without the need for measuring instruments. 10. Non-resettable, allowing for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Power generation equipment
• Substation equipment
• Power distribution and control panels

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

The signing methods for electronic contracts (party type and witness type) are directly linked to the strength of their legal effectiveness. In this article, we will outline the reasons why the more stringent "party type" has been difficult to popularize until now. ---【Conclusion of this article】-------------------------------- • There are two signing methods for electronic contracts: "witness type" and "party type," which differ in the strictness of identity verification. • The main reasons why the party type has not spread are the three factors of "effort, cost, and the structural risk of entrusting a private key." • However, with the spread of public personal authentication (JPKI) using My Number cards, these three barriers are beginning to crumble. -------------------------------------------------------- The full text of the article can be accessed from the "Related Links."

Seven Corporation has started offering the "SeveNavi AI Cleaning Diagnosis Service," which supports the organization and improvement of cleaning challenges in manufacturing environments. Organizing cleaning challenges with AI and visualizing the next steps In manufacturing cleaning, various factors need to be considered, including the material of the object, type of dirt, adhesion state, currently used cleaning agents, working time, safety, and equipment conditions. On the other hand, there are also several challenges faced on-site, such as: - Unable to determine if the current cleaning method is appropriate - Wanting to reduce cleaning time and labor - Concerns about the safety of cleaning agents and their impact on materials - Wanting to compare with another cleaning method but unable to set test conditions - Not being able to utilize past cases and knowledge for improvement activities SeveNavi organizes information such as the object, dirt, current cleaning methods, and site photos using AI, clearly presenting the applicability of cleaning methods, points of caution, missing information, and how to proceed with comparative testing. If you have any challenges regarding reviewing current cleaning methods, comparing new cleaning methods, or reducing cleaning time and labor, please feel free to consult with us.

An online seminar will be held for design, purchasing, and DX promotion personnel considering the introduction or switch to new CAD systems, featuring the DWG-compatible 2D CAD "ARES." Participants can review content directly related to business improvement, including a comparison of features and performance with AutoCAD, automation using the CAD-specific AI "A3," automatic generation of DWG drawings from BIM data, and new ways of working in the cloud. ■ Date and Time: September 17, 2026 (Thursday) 13:30 - 15:00 ■ Format: Online (with archive viewing available) ■ Participation Fee: Free ■ Recommended for: - Those considering switching from AutoCAD - Those interested in AI utilization and automation in CAD operations - Those looking to streamline collaboration with BIM - Those seeking an environment where drawings can be edited regardless of location As a viewing benefit, a free "ARES Trinity Utilization Manual" (worth 6,000 yen) will be provided. Additionally, if you apply through the URL in the related links, our company, Keynos Logic, will consistently support you from post-seminar implementation considerations to estimates and support after operation begins. If you are interested in ARES, feel free to start by participating in this seminar.

On August 28, 2026 (Friday), I participated in the "AMD Embedded Computing Summit Tokyo 2026" and showcased a "Gesture Demo" as a partner of AMD. The demonstration introduced a configuration that combines gesture recognition using OpenCV, status reporting with LLM, and one-axis motor control using INtime 7.2 and RSI-ECAT, enabling collaboration between AI, image processing, and real-time control on a single PC. We presented a next-generation PC-based industrial control system that integrates AI, image processing, and real-time control on one PC. <Overview of Demo Participation> https://www.mnc.co.jp/INtime/AMDxINtime/AMDEcsTokyoResults.html <Actual Demo Video> https://youtu.be/JmZke75_y0s <AMD CPU + INtime RTOS Introduction Page> https://www.mnc.co.jp/INtime/AMDxINtime/amdxintime.html #PC #RealTimeOS #IndustrialPC #AI