Optimal safety measures for abnormal temperatures in distribution board equipment / New product for distribution board alarm system.

Monitoring and alarming of dangerous temperatures in various industries / New product for dangerous temperature alarm devices.

■Features of the Dangerous Temperature Alarm Device 1. Capable of monitoring and alarming various dangerous temperatures (80°C) across different industries. 2. Can be installed in areas where there is a risk of dangerous temperatures, allowing for monitoring, alarming, and remote reporting. 3. Continuously monitors various dangerous temperatures in different industries on a daily basis, enabling early detection and safe response. 4. An eco-friendly "Dangerous Temperature Alarm Device" that anyone can easily install with zero standby power. 5. A new type of "Dangerous Temperature Alarm Device" that combines an alarm panel with a temperature sensing wire (80°C). ◇Features of the Temperature Sensing Wire 1. Can directly sense temperature and emit signals through physical action without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. Can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 4. The shape memory alloy has permanent memory, is rust-free, and maintains its state once activated, allowing for long-term use. 5. This product meets the performance standards of fixed temperature detectors as specified by fire safety regulations (120 seconds). 6. Non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated; the activated location must be deleted and reconnected.)

• Alarm panel
• Substation equipment
• Power distribution and control panels

Optimal safety measures for abnormal temperatures in distribution board equipment / New product for distribution board alarm system

■Features of the Distribution Board Alarm System 1. The system is equipped with temperature sensing wires (80°C) wired into the distribution/control panel, allowing for monitoring and alarm of abnormal temperatures. 2. It continuously monitors the abnormal temperatures of the distribution/control panel equipment, enabling early detection and safe response. 3. Inspection and maintenance of the distribution/control panel equipment can be conducted reliably and safely. 4. This is the optimal "Distribution Board Alarm System" for safety measures against abnormal temperatures in distribution/control panel equipment. 5. It is a "Distribution Board Alarm System" that combines a compact alarm panel with temperature sensing wires (80°C). 6. This product meets the performance standards of type 1 fixed temperature detectors (120 seconds) as specified by fire safety regulations. ◆Features of the Temperature Sensing Wire 1. It can directly sense temperature and emit signals through physical action without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. It can be wired similarly to electrical wires. It can be used for both indoor and outdoor wiring. 4. The product integrates numerous shape memory alloys at equal intervals along the wire. 5. It is simple, easy to use, and highly accurate, utilizing eco-friendly technology with zero standby power through its switching function.

• Power generation equipment
• Power distribution and control panels

New product for temperature sensing wire for monitoring abnormal temperatures of electrical wires in electrical equipment.

■Features of Temperature Sensing Wires for Electric Cables 1. Attach temperature sensing wires for electric cables to the cables using spiral tubes or similar methods to monitor abnormal temperatures in the cables. 2. Attach temperature sensing wires for electric cables to control devices and load devices using plastic bonds to monitor abnormal temperatures in the equipment. 3. Detect abnormal temperatures in the electric equipment's cables, control devices, and load devices, preventing equipment damage and fires in advance. 4. Continuously monitor abnormal temperatures in electric equipment on a daily basis, ensuring reliable and safe maintenance management. 5. Allows for safety management of electric equipment even by individuals who are not electrical engineers. ■Characteristics of Temperature Sensing Wires for Electric Cables 1. Enables direct temperature sensing and signaling through physical operation without the need for power sources or measuring devices. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and send a signal. 3. Can be wired similarly to electric cables. Additionally, it can be used for both indoor and outdoor wiring.

• Power generation equipment
• Substation equipment
• Power distribution and control panels

New product of temperature sensing wire integrated with multiple temperature memory sensors.

■Features of Temperature Sensing Wire 1. It can directly sense temperature and generate signals through physical operation without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. It allows for routine monitoring of various abnormal temperatures, ensuring reliable and safe maintenance management. 4. It can detect abnormal temperatures in various devices early, preventing equipment damage and fires. 5. By simply extending the wiring, it can provide extensive monitoring of abnormal temperatures. 6. It can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 7. It is a product that integrates a large number of shape memory alloys at regular intervals along the extended wire. 8. Utilizing the softening of the wire and the recovery of the shape memory alloy, it senses temperature by short-circuiting the two wires and generates a signal. 9. It is a simple, easy-to-use, and accurate eco-technology product with zero standby power due to its switching function. 10. The shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated, allowing for long-term use. 11. It is a product that meets the performance standards of fixed-temperature type detectors as specified by fire safety regulations (120 seconds). 12. It is a non-resettable type that allows for confirmation after activation (once sensing is activated, it cannot be reactivated; the activated location must be deleted and reconnected).

• Facility Design

Detect abnormal temperatures in the distribution board / Temperature detection sensor for distribution boards

■Features of Temperature Detection Sensors for Distribution Boards 1. Continuously monitors and detects abnormal temperatures of electrical wires in the distribution board. 2. Continuously monitors and detects abnormal temperatures of power (control) equipment and electrical (load) equipment in the distribution board. 3. Inspection tasks for distribution board equipment can be performed by anyone, ensuring reliable and safe maintenance management. 4. Utilizes shape memory alloy (restoration) and electrical wires (softening) to create a short circuit (contact) between two wires, detecting abnormal temperatures (maximum allowable temperature) and generating a signal. [Set temperature: 80°C] 5. A simple, easy-to-use product with good accuracy, featuring eco-technology with zero standby power due to its switching function. 6. Capable of simultaneous temperature detection and signaling, with a simple circuit configuration (switching function) at a low cost. 7. Shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated. 8. Operates without the need for power, ensuring no malfunction and allowing for swift, precise use over many years. 9. Enables direct temperature detection without the need for measuring instruments. 10. Non-resettable, allowing for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Power generation equipment
• Substation equipment
• Power distribution and control panels

Are you making progress on measures for the "2024 Problem"? The management of drivers' working hours is becoming stricter, and in the logistics field, reducing "waiting time for loading" has become an urgent issue. To address this challenge, our company, Hotron, proposes the "Vehicle Detection Ultrasonic Sensor 'HM-UX2'," which instantly grasps the availability of loading bays. The 'HM-UX2' contributes to the resolution of waiting times by accurately understanding the availability status, reducing unnecessary waiting and queuing, and shortening waiting times, thereby alleviating the burden on drivers! By replacing the "eyes" of your loading bay management with this high-precision sensor, why not start taking measures against the "2024 Problem"? Take a look at the product features: "Can it accurately detect availability?" "Can we really use it in our company?" "I just want to know the cost, even if it's an estimate." If you have any questions or requests, please feel free to consult us first.

As a result of the conformity assessment audit of the Information Security Management System (ISMS), which is a management system standard, it has been proven that we comply with the requirements set forth by ISO/IEC, and the following audit registration certificate has been issued: JIP-ISMS517-1.0 (ISO/IEC 27017:2015) Scope of Application * Cloud Service Provider: Provision of "CaaS Cloud" This is based on the general information security standard ISO 27001 (ISMS) and includes additional management measures to address threats and risks specific to cloud services.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

We have released a case study-type assessment trial version that can be used for reviewing promotion, recruitment selection, and training measures for HR and education personnel. It can be helpful for organizing the challenges of your company's talent and identifying potential next-generation leaders. Please download it for free first and consider how to utilize it in the field.

NTT TechnoCross Corporation (Headquarters: Minato-ku, Tokyo, President: Atsuko Oka, hereinafter referred to as "NTT TechnoCross") will start providing a new version of its health management system "HM-neo" with a meeting record summarization feature powered by generative AI from April 1, 2025 (scheduled).