Optimal safety measures for abnormal temperatures in storage batteries / New product for storage battery alarm system

Optimal safety measures for abnormal temperatures in storage batteries / New product for storage battery alarm systems

■Features of the Battery Alarm System 1. A temperature sensing wire (70°C) is installed on the outer wall of the battery or the power line, allowing for monitoring and alarming of abnormal temperatures. 2. The abnormal temperature of the battery is continuously monitored on a daily basis, enabling early detection and safe response. 3. Inspection and maintenance of battery equipment can be carried out reliably and safely. 4. This is the ideal "Battery Alarm System" for safety measures against abnormal temperatures in batteries. 5. It is a "Battery Alarm System" that combines a compact alarm panel with a temperature sensing wire (70°C). 6. This product meets the performance standards of a fixed temperature type detector (Type 1, 120 seconds) as specified by fire safety regulations. ◆Features of the Temperature Sensing Wire 1. It can directly sense temperature and emit signals through physical operation without the need for power sources or measuring instruments. 2. When the surrounding temperature reaches the set temperature (70°C), the two wires short-circuit to sense the temperature and generate a signal. 3. It can be wired similarly to electrical equipment wires and can be used for both indoor and outdoor wiring. 4. This product integrates numerous shape memory alloys at equal intervals along the wire. 5. It is simple, easy to use, has good accuracy, and employs eco-technology with zero standby power through its switching function. 6. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Power generation equipment
• Substation equipment
• Power distribution and control panels

Battery abnormal temperature detection alarm / New product for battery abnormal temperature alarm device

■Features of the Abnormal Temperature Alarm for Batteries 1. Capable of detecting and alarming for abnormal temperatures in each battery. 2. An eco-technology that can detect and alarm for abnormal temperatures in each battery with zero standby power. 3. Allows for regular centralized monitoring of abnormal heat (abnormal temperatures) in each battery. 4. Battery equipment inspection tasks can be performed by anyone, ensuring reliable and safe maintenance management. 5. Detects abnormal temperatures in each battery and alerts through an alarm to prevent equipment damage and fires. 6. A product that integrates numerous shape memory alloys at equal intervals along an extended wire. 7. Utilizes the softening of the wire and the recovery of the shape memory alloy to short-circuit between two wires for temperature sensing and signaling. 8. The shape memory alloy has permanent memory, is rust-free, and can be used for many years once activated. 9. Direct temperature sensing and signaling can be achieved through physical operation without the need for power sources or measuring instruments. 10. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and signal. 11. Can be wired similarly to electrical equipment wiring, suitable for both indoor and outdoor wiring. 12. A product that meets the performance standards of type 1 fixed temperature detectors as specified by fire safety regulations. 13. Non-resettable, allowing for confirmation after activation (once activated, it cannot be reactivated; the activated location can be deleted and reconnected).

• Power generation equipment
• Substation equipment
• Power distribution and control panels

A new product for temperature sensing (70℃) that can directly sense temperature and signal through a physical operation without the need for power.

■Features of Temperature Sensing Wire (70℃) 1. It can directly sense temperature and generate a signal through physical operation without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches 70℃, the two wires short-circuit to sense the temperature and generate a signal. 3. It allows for the collective monitoring of various abnormal temperatures on a daily basis, ensuring reliable and safe maintenance management. 4. It can detect abnormal temperatures in various devices early, preventing equipment damage and fires. 5. By simply extending the wiring, it enables extensive abnormal temperature monitoring. 6. It can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 7. It is a product that integrates a large number of shape memory alloys at regular intervals along the extended wire. 8. Utilizing the softening of the wire and the recovery of the shape memory alloy, it senses temperature by short-circuiting the two wires and generates a signal. 9. It is a simple, easy-to-use, and highly accurate eco-technology product with zero standby power due to its switching function. 10. The shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated, allowing for long-term use. 11. It is a product that meets the performance standards of fixed temperature detectors type 1 (120 seconds) as specified by fire safety regulations. 12. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reset. The activated location can be deleted and reconnected.)

• Facility Design

Detecting abnormal heat (abnormal temperature) of batteries with standby power at 0 / New product for battery temperature detection sensors

■Features of Temperature Detection Sensors for Storage Batteries 1. It can continuously monitor and detect abnormal heat generation (abnormal temperature) of storage batteries. 2. It can continuously monitor and detect abnormal temperatures of wires and electrical equipment in the charging/discharging circuit of storage battery systems. 3. Inspection tasks for storage battery systems can be performed by anyone, ensuring reliable and safe maintenance management. 4. By utilizing shape memory alloy (restoration) and wire (softening) to create a short circuit (contact) between two wires, it detects abnormal temperatures (maximum allowable temperature) and generates a signal. [Set temperature: 70°C] 5. It is a simple, easy, and accurate eco-technology product with zero standby power due to its switching function. 6. It can detect temperature and generate signals simultaneously, with a simple circuit configuration (switching function) at a low cost. 7. Shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated. 8. Operation is based on physical action that requires no power supply, ensuring no malfunction and allowing for swift, accurate use over many years. 9. Direct temperature detection is possible without the need for measuring instruments. 10. It is a non-resettable type that allows for confirmation after activation. (Once detected, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Power generation equipment
• Substation equipment
• Power distribution and control panels

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

The signing methods for electronic contracts (party type and witness type) are directly linked to the strength of their legal effectiveness. In this article, we will outline the reasons why the more stringent "party type" has been difficult to popularize until now. ---【Conclusion of this article】-------------------------------- • There are two signing methods for electronic contracts: "witness type" and "party type," which differ in the strictness of identity verification. • The main reasons why the party type has not spread are the three factors of "effort, cost, and the structural risk of entrusting a private key." • However, with the spread of public personal authentication (JPKI) using My Number cards, these three barriers are beginning to crumble. -------------------------------------------------------- The full text of the article can be accessed from the "Related Links."

Seven Corporation has started offering the "SeveNavi AI Cleaning Diagnosis Service," which supports the organization and improvement of cleaning challenges in manufacturing environments. Organizing cleaning challenges with AI and visualizing the next steps In manufacturing cleaning, various factors need to be considered, including the material of the object, type of dirt, adhesion state, currently used cleaning agents, working time, safety, and equipment conditions. On the other hand, there are also several challenges faced on-site, such as: - Unable to determine if the current cleaning method is appropriate - Wanting to reduce cleaning time and labor - Concerns about the safety of cleaning agents and their impact on materials - Wanting to compare with another cleaning method but unable to set test conditions - Not being able to utilize past cases and knowledge for improvement activities SeveNavi organizes information such as the object, dirt, current cleaning methods, and site photos using AI, clearly presenting the applicability of cleaning methods, points of caution, missing information, and how to proceed with comparative testing. If you have any challenges regarding reviewing current cleaning methods, comparing new cleaning methods, or reducing cleaning time and labor, please feel free to consult with us.

An online seminar will be held for design, purchasing, and DX promotion personnel considering the introduction or switch to new CAD systems, featuring the DWG-compatible 2D CAD "ARES." Participants can review content directly related to business improvement, including a comparison of features and performance with AutoCAD, automation using the CAD-specific AI "A3," automatic generation of DWG drawings from BIM data, and new ways of working in the cloud. ■ Date and Time: September 17, 2026 (Thursday) 13:30 - 15:00 ■ Format: Online (with archive viewing available) ■ Participation Fee: Free ■ Recommended for: - Those considering switching from AutoCAD - Those interested in AI utilization and automation in CAD operations - Those looking to streamline collaboration with BIM - Those seeking an environment where drawings can be edited regardless of location As a viewing benefit, a free "ARES Trinity Utilization Manual" (worth 6,000 yen) will be provided. Additionally, if you apply through the URL in the related links, our company, Keynos Logic, will consistently support you from post-seminar implementation considerations to estimates and support after operation begins. If you are interested in ARES, feel free to start by participating in this seminar.

On August 28, 2026 (Friday), I participated in the "AMD Embedded Computing Summit Tokyo 2026" and showcased a "Gesture Demo" as a partner of AMD. The demonstration introduced a configuration that combines gesture recognition using OpenCV, status reporting with LLM, and one-axis motor control using INtime 7.2 and RSI-ECAT, enabling collaboration between AI, image processing, and real-time control on a single PC. We presented a next-generation PC-based industrial control system that integrates AI, image processing, and real-time control on one PC. <Overview of Demo Participation> https://www.mnc.co.jp/INtime/AMDxINtime/AMDEcsTokyoResults.html <Actual Demo Video> https://youtu.be/JmZke75_y0s <AMD CPU + INtime RTOS Introduction Page> https://www.mnc.co.jp/INtime/AMDxINtime/amdxintime.html #PC #RealTimeOS #IndustrialPC #AI