Monitoring and alarming of dangerous temperatures in various industries / New product for dangerous temperature alarms.

Monitoring and alarming of dangerous temperatures in various industries / New product for dangerous temperature alarm devices.

■Features of the Dangerous Temperature Alarm Device 1. Capable of monitoring and alarming various dangerous temperatures (80°C) across different industries. 2. Can be installed in areas where there is a risk of dangerous temperatures, allowing for monitoring, alarming, and remote reporting. 3. Continuously monitors various dangerous temperatures in different industries on a daily basis, enabling early detection and safe response. 4. An eco-friendly "Dangerous Temperature Alarm Device" that anyone can easily install with zero standby power. 5. A new type of "Dangerous Temperature Alarm Device" that combines an alarm panel with a temperature sensing wire (80°C). ◇Features of the Temperature Sensing Wire 1. Can directly sense temperature and emit signals through physical action without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. Can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 4. The shape memory alloy has permanent memory, is rust-free, and maintains its state once activated, allowing for long-term use. 5. This product meets the performance standards of fixed temperature detectors as specified by fire safety regulations (120 seconds). 6. Non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated; the activated location must be deleted and reconnected.)

• Alarm panel
• Substation equipment
• Power distribution and control panels

Optimal safety measures for abnormal temperatures in distribution board equipment / New product for distribution board alarm system

■Features of the Distribution Board Alarm System 1. The system is equipped with temperature sensing wires (80°C) wired into the distribution/control panel, allowing for monitoring and alarm of abnormal temperatures. 2. It continuously monitors the abnormal temperatures of the distribution/control panel equipment, enabling early detection and safe response. 3. Inspection and maintenance of the distribution/control panel equipment can be conducted reliably and safely. 4. This is the optimal "Distribution Board Alarm System" for safety measures against abnormal temperatures in distribution/control panel equipment. 5. It is a "Distribution Board Alarm System" that combines a compact alarm panel with temperature sensing wires (80°C). 6. This product meets the performance standards of type 1 fixed temperature detectors (120 seconds) as specified by fire safety regulations. ◆Features of the Temperature Sensing Wire 1. It can directly sense temperature and emit signals through physical action without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. It can be wired similarly to electrical wires. It can be used for both indoor and outdoor wiring. 4. The product integrates numerous shape memory alloys at equal intervals along the wire. 5. It is simple, easy to use, and highly accurate, utilizing eco-friendly technology with zero standby power through its switching function.

• Power generation equipment
• Power distribution and control panels

New product for temperature sensing wire for monitoring abnormal temperatures of electrical wires in electrical equipment.

■Features of Temperature Sensing Wires for Electric Cables 1. Attach temperature sensing wires for electric cables to the cables using spiral tubes or similar methods to monitor abnormal temperatures in the cables. 2. Attach temperature sensing wires for electric cables to control devices and load devices using plastic bonds to monitor abnormal temperatures in the equipment. 3. Detect abnormal temperatures in the electric equipment's cables, control devices, and load devices, preventing equipment damage and fires in advance. 4. Continuously monitor abnormal temperatures in electric equipment on a daily basis, ensuring reliable and safe maintenance management. 5. Allows for safety management of electric equipment even by individuals who are not electrical engineers. ■Characteristics of Temperature Sensing Wires for Electric Cables 1. Enables direct temperature sensing and signaling through physical operation without the need for power sources or measuring devices. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and send a signal. 3. Can be wired similarly to electric cables. Additionally, it can be used for both indoor and outdoor wiring.

• Power generation equipment
• Substation equipment
• Power distribution and control panels

New product of temperature sensing wire integrated with multiple temperature memory sensors.

■Features of Temperature Sensing Wire 1. It can directly sense temperature and generate signals through physical operation without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. It allows for routine monitoring of various abnormal temperatures, ensuring reliable and safe maintenance management. 4. It can detect abnormal temperatures in various devices early, preventing equipment damage and fires. 5. By simply extending the wiring, it can provide extensive monitoring of abnormal temperatures. 6. It can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 7. It is a product that integrates a large number of shape memory alloys at regular intervals along the extended wire. 8. Utilizing the softening of the wire and the recovery of the shape memory alloy, it senses temperature by short-circuiting the two wires and generates a signal. 9. It is a simple, easy-to-use, and accurate eco-technology product with zero standby power due to its switching function. 10. The shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated, allowing for long-term use. 11. It is a product that meets the performance standards of fixed-temperature type detectors as specified by fire safety regulations (120 seconds). 12. It is a non-resettable type that allows for confirmation after activation (once sensing is activated, it cannot be reactivated; the activated location must be deleted and reconnected).

• Facility Design

Detect abnormal temperatures in the distribution board / Temperature detection sensor for distribution boards

■Features of Temperature Detection Sensors for Distribution Boards 1. Continuously monitors and detects abnormal temperatures of electrical wires in the distribution board. 2. Continuously monitors and detects abnormal temperatures of power (control) equipment and electrical (load) equipment in the distribution board. 3. Inspection tasks for distribution board equipment can be performed by anyone, ensuring reliable and safe maintenance management. 4. Utilizes shape memory alloy (restoration) and electrical wires (softening) to create a short circuit (contact) between two wires, detecting abnormal temperatures (maximum allowable temperature) and generating a signal. [Set temperature: 80°C] 5. A simple, easy-to-use product with good accuracy, featuring eco-technology with zero standby power due to its switching function. 6. Capable of simultaneous temperature detection and signaling, with a simple circuit configuration (switching function) at a low cost. 7. Shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated. 8. Operates without the need for power, ensuring no malfunction and allowing for swift, precise use over many years. 9. Enables direct temperature detection without the need for measuring instruments. 10. Non-resettable, allowing for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Power generation equipment
• Substation equipment
• Power distribution and control panels

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

We have released a "trial version app (browser version)" that allows you to freely test the "blinking detection technology" developed using joint patent technology with Panasonic, directly in your browser. No application, installation, or membership registration is required. It measures blinking for 30 seconds using your PC's built-in camera or your smartphone's camera, displaying the number of blinks, the rate per minute, the duration of closed eyes (average and longest), and the intervals between blinks in real-time. The camera footage is processed within the browser, and neither the video nor the measurement results are sent externally. Additionally, we have started online sales of the "blinking detection app (Windows version)" that allows unlimited measurements for research and verification purposes. It supports recording and CSV output, with prices set at 33,000 yen for general users and 16,500 yen for academic institutions (tax included, per license, one-time purchase). The camera input version and the file input version are sold separately. For integration into products and services, we also offer the "blinking detection SDK" (with a one-month free trial version available).

We will begin providing a new solution for construction companies, the "Specific Voice Detection Edge AI System," utilizing the development and operational insights from the "Specific Vehicle Detection System" co-developed with Toda Corporation, starting in September 2026. This system applies the technology of the productivity-enhancing AI camera "PROLICA" to pre-learn and analyze specific voice data collected by outdoor microphones, allowing AI to detect target sounds in real-time on-site. By using voice detection, it will be possible to early detect the presence of approaching emergency vehicles even in environments where traditional visual checks or image analysis by AI cameras are difficult due to obstructions like buildings or curves. By linking with various devices and automating the control of construction vehicle departures and alerts to workers, it contributes to improving safety at construction sites and surrounding roads. ■ Main Features of This System 1. High-precision detection using voice AI 2. Safety management independent of visibility 3. Real-time processing with edge AI For more details, please check the linked page.

We will be exhibiting at the "Advanced Construction, Disaster Prevention, and Mitigation Technology Fair in Kumamoto 2026," which will be held for two days from November 18 at Gran Messe Kumamoto (Masaki Town, Kamimashiki District, Kumamoto Prefecture). This exhibition is organized by the organizing committee of the Advanced Construction, Disaster Prevention, and Mitigation Technology Fair in Kumamoto 2026, aiming to enhance disaster prevention awareness through the introduction of advanced technologies and products related to disaster prevention, as well as to promote economic and technological exchanges. On the day of the event, we will showcase the "High Water Content Soil Improvement Agent MT Series" and the "Soil Recycling Technology Bontelan Method," and we will introduce our technologies through demonstrations using actual soil. We invite those nearby to stop by our booth. Venue: Gran Messe Kumamoto (1010 Fukutomi, Masaki Town, Kamimashiki District, Kumamoto Prefecture) Dates: November 18, 2026 (Wednesday) 10:00 AM - 5:00 PM November 19, 2026 (Thursday) 9:30 AM - 3:30 PM Our booth location: B18 Technical Presentation: November 18, 2026 (Wednesday) 1:15 PM - 1:45 PM, Seminar Room 4 Official website of the Advanced Construction, Disaster Prevention, and Mitigation Technology Fair in Kumamoto 2026: https://www.s-kumamoto.jp/

Recently, Intertek Certification AB, the Swedish subsidiary of Intertek, has been accredited by the Swedish national accreditation body Swedac as a verification body for the EU Carbon Border Adjustment Mechanism (CBAM). According to Swedac's announcement, this is the first CBAM accreditation for a verification body in Sweden. This accreditation covers six sectors: cement, steel, aluminum, fertilizers, hydrogen, and electricity, and Intertek Certification AB will provide third-party verification services for embedded emissions associated with the manufacturing of CBAM-covered products based on the scope of accreditation. CBAM is a system that reflects the carbon price on greenhouse gas emissions associated with the manufacturing of certain products imported into the EU, requiring targeted companies to properly calculate and report their greenhouse gas emissions data and comply with third-party verification. Intertek Certification Co., Ltd. supports CBAM compliance in collaboration with accredited entities and global expert teams as the contact point in Japan. If you have any inquiries regarding third-party verification or related services, please feel free to contact us.