Able to respond to residential arson / New product for residential arson alarms

New product of fire detection line alarm that can detect abnormal temperature warnings associated with fires in multiple locations.

■Features of Fire Detection Wire Alarm 1. It can provide abnormal temperature alarms associated with fires in multiple locations using fire detection wire. 2. It can provide abnormal temperature alarms associated with fires in multiple locations such as "between the ceiling and the room" or "between the floor and the room." 3. The fire detection wire can be inserted into gaps between walls, furniture, and electrical appliances to provide abnormal temperature alarms associated with fires. 4. This eco-friendly product can provide abnormal temperature alarms associated with fires with zero standby power using fire detection wire. 5. It is easy to install and move, allowing anyone to set it up. 6. It is a product that integrates multiple shape memory alloys at equal intervals along an extended wire. 7. It utilizes the softening of the wire and the recovery of the shape memory alloy to short-circuit between the two wires for temperature sensing and signaling. 8. The shape memory alloy has permanent memory, is rust-free, and can be used for many years once activated. 9. It can directly sense temperature and signal through physical operation without the need for power supply or measuring instruments. 10. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and signal. 11. It can be wired similarly to electrical equipment wiring. 12. It is a product that meets the performance standards of type 1 fixed temperature detectors as specified by fire safety regulations. 13. It is a non-resettable type that allows for confirmation after activation (once activated, it cannot be reactivated; the activated location must be deleted and reconnected).

• Sports related facilities

New product for residential arson alarms that can respond to residential arson.

■Features of Residential Arson Detectors 1. Can detect residential arson at an early stage. 2. Easily installed outdoors, in garages, storage sheds, or waste disposal areas of buildings prone to arson. 3. By extending the arson detection wire, a wide area of arson alert can be created. 4. An eco-friendly product that can detect and alert for fires caused by residential arson with zero standby power. 5. Can continuously monitor for fires caused by residential arson. Reliable, safe, and secure. 6. A product that integrates numerous shape memory alloys at equal intervals along the extended wire. 7. Utilizes the softening of the wire and the recovery of the shape memory alloy to short-circuit between the two wires, sensing temperature and generating a signal. 8. The shape memory alloy has permanent memory, is rust-free, and can maintain its function indefinitely after activation, allowing for long-term use. 9. Direct temperature sensing and signaling through physical operation without the need for power supply or measuring instruments. 10. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit, sensing temperature and generating a signal. 11. Can be wired similarly to electrical equipment wires, suitable for both indoor and outdoor wiring. 12. A product that meets the performance standards of type 1 fixed temperature detectors as specified by fire safety regulations. 13. Non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Imported houses and log houses
• Other security systems

New product of temperature sensing wire integrated with multiple temperature memory sensors.

■Features of Temperature Sensing Wire 1. It can directly sense temperature and generate signals through physical operation without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. It allows for routine monitoring of various abnormal temperatures, ensuring reliable and safe maintenance management. 4. It can detect abnormal temperatures in various devices early, preventing equipment damage and fires. 5. By simply extending the wiring, it can provide extensive monitoring of abnormal temperatures. 6. It can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 7. It is a product that integrates a large number of shape memory alloys at regular intervals along the extended wire. 8. Utilizing the softening of the wire and the recovery of the shape memory alloy, it senses temperature by short-circuiting the two wires and generates a signal. 9. It is a simple, easy-to-use, and accurate eco-technology product with zero standby power due to its switching function. 10. The shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated, allowing for long-term use. 11. It is a product that meets the performance standards of fixed-temperature type detectors as specified by fire safety regulations (120 seconds). 12. It is a non-resettable type that allows for confirmation after activation (once sensing is activated, it cannot be reactivated; the activated location must be deleted and reconnected).

• Facility Design

What do the members of the back office department consider when choosing or replacing a system? If the same product is handled by both a "manufacturer" and a "distributor," how do you feel about it? "Distributor"? Isn't it cheaper to buy directly from the manufacturer? It's obvious that receiving direct service is better, right? ...Is that really the case? In the materials we are releasing this time, we will explain the benefits of "introducing a distributor." Here’s a preview of the materials: 【If you’re going to choose, you should leverage the power of a distributor that handles the ○○ system!】 【Make the distributor your ○○○○○○○ and use them to the fullest!】 Along with these points, we are offering a "Distributor Evaluation Checklist" that will be your strong ally, free of charge! Please make good use of it.

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. This is recommended for making doors with touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Allows for face recognition along with mask detection and body temperature measurement simultaneously. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and notifies via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

A new dedicated end cover that firmly protects the ends of the channel slit (N11/N112) has arrived! Just by installing it, you can prevent injuries and snags, significantly improving safety after construction. Furthermore, the finish is neat and beautiful. We offer three colors: chrome, white, and black.

Nitto Kousakusho Co., Ltd. (Osaka) is a comprehensive manufacturing company that supports production through "jig expertise × precision machining." We are a manufacturer of Wankel-type rotary engines (RE). Our Wankel-type RE faithfully reproduces the basic structure of Dr. Wankel's design. Nitto Kousakusho Co., Ltd. (Osaka) is pleased to announce the start of special order production and sales of the "80cc RE for gasoline" that we have been developing as a prototype, named "NRG-80." [See brochure] This product is a compact 80cc RE developed utilizing the precision machining technology and unique know-how that we have cultivated over many years. It is expected to be widely used in civilian applications as a power source for generators, pumps, and in the hobby sector. We will continue to respond to our customers' diverse needs and contribute to society through innovative manufacturing. You can watch the operation video at the following address: https://www.youtube.com/watch?v=mVCfVFYMrGU #RotaryEngine #HydrogenRotaryEngine #NittoMFG #ToolSales