Newly launched high-temperature LED lighting fixtures (LCHA)

Industry first!! Base light type, suitable for high-temperature environments up to 60°C, usable indoors and outdoors. Glare prevention. New release of high-temperature LED lighting fixture LCHA type.

High-Temperature LED Lighting Fixture LCHA Type Ideal for use around boiler rooms, kitchens, and near ferrous and non-ferrous melting furnaces, as well as in rolling and casting factories, in high-temperature environments (60°C). Equivalent to FLR40W×2 lamps. Achieves 48% energy savings (compared to conventional products). The lifespan of the LED light source is 40,000 hours (Ta=60°C). ◎ Glare reduction treatment implemented to minimize glare. ◎ Industry-first!! Base light type (equivalent to FLR40W×2 lamps) usable in high-temperature environments of 60°C, both indoors and outdoors. [For more details, please download the catalog or feel free to contact us] ↓ ↓ ↓ ↓ ↓ ↓

• Other Kitchen Supplies
• Waterproof, moisture-proof, explosion-proof lighting fixtures
• Lighting Planning

Explosion-proof LED lighting fixtures using straight LED lamps compliant with the International Harmonized Explosion Protection Guidelines 2008 standard for explosion-proof areas such as chemical plants.

Launch of explosion-proof LED lighting fixtures (LZAB series) These LED lighting fixtures can be installed in explosion-proof areas such as chemical plants, oil refineries, and hydrogen stations. The light source (lamp) can be replaced independently, allowing for reduced capital investment during lighting equipment updates compared to conventional integrated LED lighting fixtures. Additionally, it achieves brightness equivalent to a high-output 2-lamp FHF32 type while reducing power consumption by approximately 36% compared to traditional fluorescent lamps (based on our estimated conditions). It is suitable for explosion-proof performance in Zone 1, Zone 2 areas, and hydrogen areas. ■ Product Features ○ Achieves brightness equivalent to a high-output 2-lamp FHF32 type, with power consumption reduced by approximately 36%. ○ Uses straight LED lamps as the light source. ○ Lamps can be replaced using the same method as conventional light sources (FLR/FHF). ○ Compatible with Zone 1, Zone 2 areas, and hydrogen areas.

• Waterproof, moisture-proof, explosion-proof lighting fixtures
• Lighting Planning

The glare-reducing cover delivers eye-friendly light. FHF32 type high-output equivalent to 2 lamps, enclosed LED lighting fixture, LCBB type.

Sealed LED Lighting Fixture LCBB Type It has a sealed structure with high robustness and durability, and excellent waterproof performance. Equivalent to 2 lamps of FHF32W high output. Achieves 48% energy savings (compared to conventional products). The lifespan of the LED light source is 60,000 hours. ◎ Glare reduction treatment has been implemented to reduce glare. [For more details, please download the catalog or feel free to contact us] ↓ ↓ ↓ ↓ ↓ ↓

• Waterproof, moisture-proof, explosion-proof lighting fixtures
• Scaffolding and Support Materials
• Lighting Planning

Compatible with various installation environments. It has a sealed structure that offers high robustness and durability, and excellent waterproofing. Glare-reducing sealed LED lighting fixture.

Sealed LED Lighting Fixture LCAB Type It has a sealed structure with high robustness and excellent waterproof performance. Achieves the equivalent of one FHF32W high-output lamp in a compact size that is half that of conventional products. The lifespan of the LED light source is 60,000 hours. ◎ Glare reduction treatment has been implemented to minimize glare. [For more details, please download the catalog or feel free to contact us] ↓ ↓ ↓ ↓ ↓ ↓

• LED light source/module

Caught up in daily input, approval, and checks, I want to improve but can't find the time to consider it. In back offices, which tend to fall into such a "negative loop," it's understood that system implementation can be a breakthrough, but the burden of the implementation itself is often significant, leading to new sources of concern. During the consideration phase, it takes time to request materials and compare demos, and even if the differences are clear, there is no certainty about whether it will fit the company. After implementation, issues often arise in operations, such as not being able to connect to support or having multiple inquiry points that cause confusion. Therefore, while organizing common failure cases, we have summarized key points for practical staff to proceed with a selection that is "smooth," "thorough," and "without regret." Common failure case 1: The purpose is vague, and "systematization" becomes the goal. Common failure case 2: It does not match the company's operations. Common failure case 3: Realizing it is "difficult" after starting to use it. Common failure case 4: Total costs balloon. You can read more without needing to input personal information. Please visit the iBusiness Partners column page! https://ibp-column.sfsite.me/33868

We have published an introduction document for the solution "Easy Commuting Expenses," which supports the efficiency of commuting expense management. This document clearly presents the features and benefits of "Easy Commuting Expenses," which enables centralized management of commuting costs, including train, bus, and private car commuting. It streamlines tasks that place a heavy burden on staff, such as determining commuting routes, calculating refunds for commuter passes, responding to fare changes, and managing payment histories, while supporting fair and appropriate commuting expense reimbursements. Additionally, it includes case studies based on the implementation results from over 650 companies nationwide, as well as the effects of cost reduction and operational efficiency. Companies considering a review of commuting expense management or business improvements are encouraged to take a look.

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

An article has been published regarding the case study of the attendance management system "KING OF TIME" implemented at Nichirei Industrial Co., Ltd. ~ In the case of Nichirei Industrial ~ The workload related to attendance management has decreased. With the transition from analog tasks to automated aggregation of working hours and granting of annual leave, we can now focus on our work with peace of mind. Particularly regarding the "punching method," we utilize fingerprint and facial recognition. By using biometric authentication, impersonation is not possible, and I believe the accuracy of attendance has significantly improved. Transparency has been ensured. 【Case Overview】 ■Challenges Before Implementation - Handwritten attendance sheets were used, resulting in input tasks to incorporate data into the payroll system. ■Key Points of Implementation - Systematization has reduced input tasks. Biometric authentication prevents impersonation. *For more details, please refer to the related links or feel free to contact us.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.