Released a compact LED fluorescent lamp.

No installation required, high-quality LED compact fluorescent lamps, easy to install, and very popular!

LED compact fluorescent lamps without construction can support three types of lighting methods with one type of fluorescent lamp. 36*225mm, 36*320mm, 36*410mm, 36*535mm 1. Can be replaced with existing straight tube fluorescent lamps: glow type, rapid type, and inverter type! 2. The LED is packaged by our own company, ensuring good quality and bright, uniform light without unevenness. 3. The power capacitor is made in Japan by Rubycon, ensuring a long lifespan. 4. Our company's frosted cover has a light transmittance of 92%, while the normal light transmittance is only 85%. ● For more details, please download the catalog or contact us.

• Waterproof, moisture-proof, explosion-proof lighting fixtures
• Waterproofing work

Compact high-lumen high-quality LED fluorescent lamp

Direct factory sales, low prices, and the ability to manage delivery times, 10 years of experience with Japan, 2 years of quality assurance! 50,000 hours of long lifespan. Electricity costs reduced by half! ● For more details, please download the catalog or contact us.

• Floodlight
• Waterproof, moisture-proof, explosion-proof lighting fixtures
• Waterproofing work

No installation required, high-quality LED compact fluorescent lamps, easy to install, and very popular!

LED compact fluorescent lamps without construction type can support three lighting methods with one type of fluorescent lamp. 36*245mm 36*410mm 36*535mm 36*560mm ● For more details, please download the catalog or contact us.

• Waterproof, moisture-proof, explosion-proof lighting fixtures
• Waterproofing work

High lumen high-quality LED compact fluorescent lamp 36*225 36*320 36*410 36*415 36*535 36*560mm

Direct factory sales, low prices, and the ability to manage delivery times, 10 years of experience in Japan, 2 years of quality assurance! 50,000 hours of long lifespan. Electricity costs reduced by half! ● For more details, please download the catalog or contact us.

• Waterproof, moisture-proof, explosion-proof lighting fixtures
• Waterproofing work

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK

From November 11, 2025 (Tuesday), at Pacifico Yokohama, we will be exhibiting at interOpto2025 / Light and Laser Science and Technology Fair (organized by the Optical Industry Technology Promotion Association / Optronics Corporation) with a focus on: - UV-transmitting glass that can be molded - Diffusion glass that can uniformly diffuse incident light - A double-sided lens array that is molded without lamination 【About the Exhibition】 Event Name: interOpto2025 / Light and Laser Science and Technology Fair UV Fair Date: November 11 (Tuesday) to 13 (Thursday), 2025 Opening Hours: 10:00 AM to 5:00 PM Venue: Pacifico Yokohama Exhibition Hall C Booth Number: C-15 Organizer: Optical Industry Technology Promotion Association / Optronics Corporation Official Website: https://www.optronics.co.jp/interopto/ We invite everyone attending this exhibition to visit our booth "Gosuzumi Seiko Glass." We sincerely look forward to meeting you on-site.