Early detection of abnormal temperatures due to industrial equipment fires / New product for industrial abnormal temperature alarm.

New product for abnormal temperature alarms that detect abnormal temperatures in home appliances and industrial equipment.

■Features of the Abnormal Temperature Alarm 1. Can be installed on household appliances and industrial equipment in factories to provide an abnormal temperature (80°C) alarm. 2. Enables early detection of abnormal temperatures, preventing equipment damage and fires. 3. Allows for regular monitoring of abnormal temperatures, ensuring reliable and safe maintenance management. 4. Can be easily installed on household appliances, industrial equipment, and appliances that may be subject to recall. 5. The abnormal temperature alarm is an eco-friendly product with zero standby power due to its switching function. 6. The temperature memory sensor directly senses temperature and generates signals through physical operation without the need for power or measuring instruments. 7. The temperature memory sensor is a product that integrates shape memory alloy into a coil shape with electrical wires. 8. The temperature memory sensor detects temperature by short-circuiting the two wires (softening) and shape memory alloy (restoration) to generate signals. 9. This product meets the performance standards of fixed temperature type detectors (120 seconds) as specified by fire safety regulations. 10. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Other commercial buildings and service facilities
• Sports related facilities

Early detection of abnormal temperatures due to industrial equipment fires / New product for industrial abnormal temperature alarm.

■Features of Industrial Abnormal Temperature Alarm System 1. It can detect abnormal temperatures in industrial equipment early, preventing damage and fires. 2. It allows for daily centralized monitoring of abnormal temperatures in various industrial machines. 3. By installing it on each industrial device, maintenance management of the entire factory can be carried out reliably and safely. 4. It is an eco-technology that can detect and alarm abnormal temperatures in various industrial machines with zero standby power. 5. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and send a signal. 6. It can directly sense temperature and send signals through physical operation without the need for power supply or measuring instruments. 7. It can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 8. It is a product that integrates numerous shape memory alloys at equal intervals of 0.5m along the wire. 9. It utilizes the softening of the wire and the recovery of the shape memory alloy to short-circuit the two wires, sensing temperature and sending a signal. 10. The shape memory alloy has permanent memory, is rust-free, and can be used for many years once activated. 11. It is a product that meets the performance standards of fixed-temperature detectors type 1 (120 seconds) as specified by fire safety regulations. 12. It is a non-resettable type that allows for confirmation after activation (once activated, it cannot be reactivated; the activated location can be deleted and reconnected).

• Other security systems

Eco technology utilizing the restoration of shape memory alloys and the softening of electric wires / New product of temperature memory sensors

■Features of Temperature Memory Sensor 1. It operates through a physical action that does not require power supply or measuring instruments, allowing direct temperature sensing and signal generation. 2. The operation allows direct temperature detection through physical action, and the circuit configuration can be simple and low-cost. 3. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 4. It can continuously monitor various abnormal temperatures. 6. This product integrates shape memory alloy with electric wires. Set temperature (80°C). 7. It utilizes the softening of the wire and the recovery of the shape memory alloy to short-circuit the two wires, sensing the temperature and generating a signal. 8. It is an eco-friendly technology product with zero standby power due to its switching function. 9. The shape memory alloy has permanent memory and is rust-free, maintaining its state permanently once activated. 10. This product meets the performance standards of fixed temperature detectors type 1 (120 seconds) as specified by fire safety regulations. 11. It is a non-resettable type that allows confirmation after activation. ■Contact Information for Inquiries 2-2-8 Minami Tsutsujigaoka, Kameoka City, Kyoto Prefecture, 621-0847 Space Works Contact: Wada wadakame@siren.ocn.ne.jp TEL: 0771-25-3430 / FAX: 0771-25-4932

• Facility Design

New product of temperature sensing wire integrated with multiple temperature memory sensors.

■Features of Temperature Sensing Wire 1. It can directly sense temperature and generate signals through physical operation without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. It allows for routine monitoring of various abnormal temperatures, ensuring reliable and safe maintenance management. 4. It can detect abnormal temperatures in various devices early, preventing equipment damage and fires. 5. By simply extending the wiring, it can provide extensive monitoring of abnormal temperatures. 6. It can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 7. It is a product that integrates a large number of shape memory alloys at regular intervals along the extended wire. 8. Utilizing the softening of the wire and the recovery of the shape memory alloy, it senses temperature by short-circuiting the two wires and generates a signal. 9. It is a simple, easy-to-use, and accurate eco-technology product with zero standby power due to its switching function. 10. The shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated, allowing for long-term use. 11. It is a product that meets the performance standards of fixed-temperature type detectors as specified by fire safety regulations (120 seconds). 12. It is a non-resettable type that allows for confirmation after activation (once sensing is activated, it cannot be reactivated; the activated location must be deleted and reconnected).

• Facility Design

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

We have released a "trial version app (browser version)" that allows you to freely test the "blinking detection technology" developed using joint patent technology with Panasonic, directly in your browser. No application, installation, or membership registration is required. It measures blinking for 30 seconds using your PC's built-in camera or your smartphone's camera, displaying the number of blinks, the rate per minute, the duration of closed eyes (average and longest), and the intervals between blinks in real-time. The camera footage is processed within the browser, and neither the video nor the measurement results are sent externally. Additionally, we have started online sales of the "blinking detection app (Windows version)" that allows unlimited measurements for research and verification purposes. It supports recording and CSV output, with prices set at 33,000 yen for general users and 16,500 yen for academic institutions (tax included, per license, one-time purchase). The camera input version and the file input version are sold separately. For integration into products and services, we also offer the "blinking detection SDK" (with a one-month free trial version available).

We will begin providing a new solution for construction companies, the "Specific Voice Detection Edge AI System," utilizing the development and operational insights from the "Specific Vehicle Detection System" co-developed with Toda Corporation, starting in September 2026. This system applies the technology of the productivity-enhancing AI camera "PROLICA" to pre-learn and analyze specific voice data collected by outdoor microphones, allowing AI to detect target sounds in real-time on-site. By using voice detection, it will be possible to early detect the presence of approaching emergency vehicles even in environments where traditional visual checks or image analysis by AI cameras are difficult due to obstructions like buildings or curves. By linking with various devices and automating the control of construction vehicle departures and alerts to workers, it contributes to improving safety at construction sites and surrounding roads. ■ Main Features of This System 1. High-precision detection using voice AI 2. Safety management independent of visibility 3. Real-time processing with edge AI For more details, please check the linked page.

We will be exhibiting at the "Advanced Construction, Disaster Prevention, and Mitigation Technology Fair in Kumamoto 2026," which will be held for two days from November 18 at Gran Messe Kumamoto (Masaki Town, Kamimashiki District, Kumamoto Prefecture). This exhibition is organized by the organizing committee of the Advanced Construction, Disaster Prevention, and Mitigation Technology Fair in Kumamoto 2026, aiming to enhance disaster prevention awareness through the introduction of advanced technologies and products related to disaster prevention, as well as to promote economic and technological exchanges. On the day of the event, we will showcase the "High Water Content Soil Improvement Agent MT Series" and the "Soil Recycling Technology Bontelan Method," and we will introduce our technologies through demonstrations using actual soil. We invite those nearby to stop by our booth. Venue: Gran Messe Kumamoto (1010 Fukutomi, Masaki Town, Kamimashiki District, Kumamoto Prefecture) Dates: November 18, 2026 (Wednesday) 10:00 AM - 5:00 PM November 19, 2026 (Thursday) 9:30 AM - 3:30 PM Our booth location: B18 Technical Presentation: November 18, 2026 (Wednesday) 1:15 PM - 1:45 PM, Seminar Room 4 Official website of the Advanced Construction, Disaster Prevention, and Mitigation Technology Fair in Kumamoto 2026: https://www.s-kumamoto.jp/

Recently, Intertek Certification AB, the Swedish subsidiary of Intertek, has been accredited by the Swedish national accreditation body Swedac as a verification body for the EU Carbon Border Adjustment Mechanism (CBAM). According to Swedac's announcement, this is the first CBAM accreditation for a verification body in Sweden. This accreditation covers six sectors: cement, steel, aluminum, fertilizers, hydrogen, and electricity, and Intertek Certification AB will provide third-party verification services for embedded emissions associated with the manufacturing of CBAM-covered products based on the scope of accreditation. CBAM is a system that reflects the carbon price on greenhouse gas emissions associated with the manufacturing of certain products imported into the EU, requiring targeted companies to properly calculate and report their greenhouse gas emissions data and comply with third-party verification. Intertek Certification Co., Ltd. supports CBAM compliance in collaboration with accredited entities and global expert teams as the contact point in Japan. If you have any inquiries regarding third-party verification or related services, please feel free to contact us.