Abnormal temperature alarms associated with fires in multiple locations can be detected by fire detection lines / New product of fire detection line alarm.

New product of fire detection line alarm that can detect abnormal temperature warnings associated with fires in multiple locations.

■Features of Fire Detection Wire Alarm 1. It can provide abnormal temperature alarms associated with fires in multiple locations using fire detection wire. 2. It can provide abnormal temperature alarms associated with fires in multiple locations such as "between the ceiling and the room" or "between the floor and the room." 3. The fire detection wire can be inserted into gaps between walls, furniture, and electrical appliances to provide abnormal temperature alarms associated with fires. 4. This eco-friendly product can provide abnormal temperature alarms associated with fires with zero standby power using fire detection wire. 5. It is easy to install and move, allowing anyone to set it up. 6. It is a product that integrates multiple shape memory alloys at equal intervals along an extended wire. 7. It utilizes the softening of the wire and the recovery of the shape memory alloy to short-circuit between the two wires for temperature sensing and signaling. 8. The shape memory alloy has permanent memory, is rust-free, and can be used for many years once activated. 9. It can directly sense temperature and signal through physical operation without the need for power supply or measuring instruments. 10. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and signal. 11. It can be wired similarly to electrical equipment wiring. 12. It is a product that meets the performance standards of type 1 fixed temperature detectors as specified by fire safety regulations. 13. It is a non-resettable type that allows for confirmation after activation (once activated, it cannot be reactivated; the activated location must be deleted and reconnected).

• Sports related facilities

New product for residential arson alarms that can respond to residential arson.

■Features of Residential Arson Detectors 1. Can detect residential arson at an early stage. 2. Easily installed outdoors, in garages, storage sheds, or waste disposal areas of buildings prone to arson. 3. By extending the arson detection wire, a wide area of arson alert can be created. 4. An eco-friendly product that can detect and alert for fires caused by residential arson with zero standby power. 5. Can continuously monitor for fires caused by residential arson. Reliable, safe, and secure. 6. A product that integrates numerous shape memory alloys at equal intervals along the extended wire. 7. Utilizes the softening of the wire and the recovery of the shape memory alloy to short-circuit between the two wires, sensing temperature and generating a signal. 8. The shape memory alloy has permanent memory, is rust-free, and can maintain its function indefinitely after activation, allowing for long-term use. 9. Direct temperature sensing and signaling through physical operation without the need for power supply or measuring instruments. 10. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit, sensing temperature and generating a signal. 11. Can be wired similarly to electrical equipment wires, suitable for both indoor and outdoor wiring. 12. A product that meets the performance standards of type 1 fixed temperature detectors as specified by fire safety regulations. 13. Non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Imported houses and log houses
• Other security systems

New product of temperature sensing wire integrated with multiple temperature memory sensors.

■Features of Temperature Sensing Wire 1. It can directly sense temperature and generate signals through physical operation without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. It allows for routine monitoring of various abnormal temperatures, ensuring reliable and safe maintenance management. 4. It can detect abnormal temperatures in various devices early, preventing equipment damage and fires. 5. By simply extending the wiring, it can provide extensive monitoring of abnormal temperatures. 6. It can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 7. It is a product that integrates a large number of shape memory alloys at regular intervals along the extended wire. 8. Utilizing the softening of the wire and the recovery of the shape memory alloy, it senses temperature by short-circuiting the two wires and generates a signal. 9. It is a simple, easy-to-use, and accurate eco-technology product with zero standby power due to its switching function. 10. The shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated, allowing for long-term use. 11. It is a product that meets the performance standards of fixed-temperature type detectors as specified by fire safety regulations (120 seconds). 12. It is a non-resettable type that allows for confirmation after activation (once sensing is activated, it cannot be reactivated; the activated location must be deleted and reconnected).

• Facility Design

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, or management: Are you facing any challenges with current issues or selecting the right sensors for parking management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Vehicle Detection Sensor Basic Guide This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document presents the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who want to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. Depending on the application and installation location, you can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520." 【Recommended for such places!】 ☑ Entrance facing a busy passageway ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passageways ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing to minimize power consumption, contributing to energy-saving effects ● Equipped with a light touch function, allowing the door to open and close simply by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

The television program "Ushiwaka Chapter 6 - The Challenges of Skilled Workers Protecting Japan's Infrastructure" will feature Azeas. In addition to terrestrial broadcasting, there will also be an archive distribution on ABEMA TV. Please be sure to watch. ● Broadcast Schedule Nagoya TV (Me-Tele): June 2, 2026 (Tuesday) at 23:10 ABEMA TV: June 4, 2026 (Thursday) at 24:00 (Free, with archive distribution available) Hiroshima Home TV: June 4, 2026 (Thursday) at 24:45 KKB Kagoshima Broadcasting: June 7, 2026 (Sunday) at 17:25 *For more details, please feel free to contact us through the related link below: [Protective Clothing Wisdom.com]. [Protective Clothing Wisdom.com] is a comprehensive information site for safe working environments, providing guidance on protective clothing and equipment for different work environments, methods for putting on and taking off, and information on customer usage records.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.