The installation of the ceiling-mounted fire alarm can be easily done from indoors. / New product for ceiling-mounted fire alarm brackets.

Round inspection opening/sealing hole that can be easily installed on the ceiling.

■Features of Ceiling Holes (Construction) 1. Wiring and cabling in the ceiling space can be done from indoors after the ceiling work is completed. 2. Wiring for information communication systems (IT) and various electrical works can be easily done from indoors in the ceiling space. 3. Not only electrical wires, but also piping for air conditioning refrigerants and air ducts can be installed from indoors to the ceiling space. 4. Wiring can be easily done from indoors to the ceiling space without becoming exposed, preserving the interior design of the building, and achieving a neat and aesthetically pleasing finish. 5. Construction time can be reduced by half (1/2) and construction costs can be lowered by one third (1/3), allowing for safe work and easier electrical installations. ■Features of Ceiling Holes (Product) 1. It is a round inspection opening (entry point) that can be installed in ceiling finishing materials. 2. It has a good appearance and can be easily installed with a one-touch mechanism. 3. There is no need for repair work on ceiling finishing materials or ceiling substrate materials, and no specialized contractors are required. 4. It can be installed even in ceilings without substrate materials (such as traditional Japanese room ceilings).

• Inspection hatches, manhole covers, and ditch covers
• Piping and electrical wiring materials
• Interior construction

Electrical work for new construction and renovations can be done easily / Ceiling hole construction technology

■Features of Ceiling Hole Construction Technology 1. Electrical work (ceiling wiring) can be done from inside after the ceiling construction is completed. 2. Wiring and installation of electrical equipment and various sensors for new construction, renovations, and extensions can be easily done from inside. 3. Wiring and installation of electrical equipment and various sensors can be easily done from inside without exposed wiring, preserving the interior design of the building and achieving a neat and aesthetically pleasing finish. 4. Construction time can be reduced (by half), and construction costs can be lowered (by one-third), allowing for safe work and easy electrical construction. 5. Connection verification and inspection can be easily performed from inside, making maintenance tasks easier.

• Inspection hatches, manhole covers, and ditch covers
• Other commercial buildings and service facilities
• Interior construction

Installation and inspection of ceiling-mounted fire detectors can be easily done from indoors / New product for ceiling stands.

■Features of the Ceiling Stand 1. The installation of ceiling-mounted detectors, wiring, and fixture mounting can be completed all at once after the ceiling work is finished. 2. Fire testing, operation confirmation, and installation position verification of ceiling-mounted detectors can be done from indoors. 3. Wiring can be done from indoors to the ceiling space without exposed wiring, maintaining the building's aesthetic and providing a good finish. 4. Shortened construction time (by half), reduced construction costs (by one-third), safer work conditions, and easier installation of fire prevention equipment. 5. Maintenance work and fire prevention management become safer and easier.

• Inspection hatches, manhole covers, and ditch covers
• Other commercial buildings and service facilities
• Manhole body

Fire safety equipment installation for new construction and renovations can be easily done / Sealing stand construction technology

■Features of the Sealing Stand 1. Installation of fire protection equipment, wiring, and mounting of fire detectors can be done collectively after the ceiling work is completed. 2. Wiring in the ceiling and installation of fire detectors for new construction, renovations, and extensions can be easily done from inside the room. 3. Fire tests, confirmation of operation, and verification of installation positions for ceiling detectors can be conducted from inside the room. 4. Wiring and installation of fire protection equipment in the ceiling can be easily done from inside the room without exposed wiring, preserving the interior design of the building and ensuring a neat and tidy finish. 5. Shortened construction time (by half), reduced costs (by one-third), safe work conditions, and easier fire protection equipment installation. 6. Fire tests, confirmation of operation, and verification of installation positions can be conducted from inside the room, making maintenance work safe and easy.

• Inspection hatches, manhole covers, and ditch covers
• Other commercial buildings and service facilities
• Interior construction

New product of sealing unit that facilitates electrical work for building renovations and extensions.

■Features of the Sealing Unit (Installation) 1. Wiring in the ceiling space and the installation of wiring devices can be done from inside the room after the ceiling work is completed. 2. Various electrical works for building renovations and extensions can easily be performed from inside the room for ceiling wiring and the installation of wiring devices. 3. Ceiling wiring and the installation of wiring devices can be easily done from inside the room without exposed wiring, preserving the interior design of the building, and achieving a neat and aesthetically pleasing finish. Additionally, maintenance work becomes easier. 4. Construction time can be reduced by half (1/2) and construction costs can be lowered by a third (1/3), allowing for safe work and easier electrical construction. ■Features of the Sealing Unit (Product) 1. It is a round inspection opening (entry point) with wiring devices that can be installed on ceiling finishing materials. 2. It has a good appearance and can be easily installed with a one-touch mechanism. 3. There is no need for repair work on ceiling finishing materials or ceiling substrate materials, and no specialized contractors are required. 4. It can be installed even on ceilings without substrate materials (such as traditional Japanese room ceilings). 5. The installation or replacement of wiring devices can be easily done on the floor surface instead of the ceiling surface (by removing the cover). 6. Connection checks and inspections can be performed without removing wiring devices, and the direction and arrangement can be freely changed (by removing the cover) (changing the direction of the cover).

• System ceiling
• Unit and other construction

New product for easily inspecting and connecting junctions of ceiling wires from indoors / Junction inspection opening.

■Features of the Joint Inspection Opening (Construction) 1. It can be easily installed from indoors onto the ceiling without any discomfort and with a good appearance. 2. It can be installed on the ceiling surface at the connection (joint) location of the wiring in the ceiling space from indoors. 3. The cover can be opened from indoors, allowing for easy inspection and connection work at the joint of the wiring in the ceiling space. 4. By periodically inspecting the connections of the ceiling wiring, which can be a cause of fire, by opening the cover from indoors, it is possible to prevent equipment damage and fires caused by overheating due to overload or poor connections. 5. The cover can be opened from indoors to perform connection replacement work for miswiring or poor connections of the ceiling wiring, without damaging the ceiling finishing materials. 6. It can be used not only for connecting general electrical wiring but also for connecting communication lines in low-voltage work. ■Features of the Joint Inspection Opening (Product) 1. It is a joint inspection opening that can be installed on ceiling finishing materials. 2. It has a good appearance and can be easily installed with a one-touch mechanism. 3. There is no need for repair work on ceiling finishing materials or ceiling substrate materials, and no specialized contractors are required. 4. It can be installed even on ceilings without substrate materials (such as traditional Japanese room ceilings).

• Inspection hatches, manhole covers, and ditch covers
• Other commercial buildings and service facilities
• Manhole body

The installation of the attic fire alarm can be easily done from indoors. / New product for attic fire alarm brackets.

■Features of Ceiling Space Fire Alarm Bracket (Installation) 1. The installation of the fire alarm in the ceiling space can be easily done from indoors, allowing for early detection of ceiling space fires. 2. The cover can be opened from indoors, making it easy to test and inspect the fire alarm in the ceiling space. 3. A fire alarm can also be installed on the cover, enabling coordination between indoor and ceiling space fire alarms. 4. The installation of the ceiling space fire alarm bracket on the ceiling surface can be easily accomplished. 5. It can be installed neatly and unobtrusively without compromising the building's image. 6. Work such as equipment installation, fire testing, and inspections can be safely performed from indoors without entering the ceiling space. ■Features of Ceiling Space Fire Alarm Bracket (Product) 1. This is a ceiling space fire alarm bracket that can be installed on ceiling finishing materials. 2. It has a good appearance and allows for easy one-touch installation. 3. There is no need for repair work on ceiling finishing materials or ceiling framing materials, and no specialized contractors are required. 4. It can be installed even on ceilings without framing materials (such as traditional Japanese room ceilings).

• Inspection hatches, manhole covers, and ditch covers
• Other commercial buildings and service facilities
• Manhole body

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. This is recommended for making doors with touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Allows for face recognition along with mask detection and body temperature measurement simultaneously. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and notifies via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, or management: Are you facing any challenges with current issues or selecting the right sensors for parking management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Vehicle Detection Sensor Basic Guide This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document presents the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

We will be exhibiting at the only comprehensive and cross-sectional international convention in the marine field in Japan, "Techno-Ocean 2025." In this exhibition, we will introduce a wide range of specialized survey services related to offshore wind power generation projects, including wind and sea condition surveys, O&M, sediment surveys, and fishing ground environmental monitoring. We will also showcase marine surveys and seagrass bed investigations using marine robots such as autonomous surface vehicles (ASVs) and underwater drones, as well as the collection of dead fish in aquaculture operations.

The energy policy promoted by the government has finally made a significant shift from "quantity to quality." The previous large-scale introduction of renewable energy policies relied on inexpensive foreign-made panels, leading to the chaotic installation of mega-solar farms across Japan's land, which created environmental, landscape, and waste issues. As a result, Japan's energy self-sufficiency rate remains at a mere 13%, and even with the advancement of renewable energy, "import dependence" has not been resolved. In light of this reflection, the focus moving forward will be on "developing domestic energy technologies" and promoting "self-consumption type renewable energy." Among these, perovskite solar cells are lightweight, highly efficient, and offer great flexibility in installation, making them a trump card for "decentralized renewable energy" that can be easily retrofitted onto building walls and roofs. Kenneth Energy Development Co., Ltd. is developing a "selective self-consumption solar power generation system" that utilizes domestic panels and perovskite technology. Based on a track record of 83 projects nationwide and a total construction cost of 908.4 billion yen, it supports the industry's "energy independence." Now, renewable energy is entering an era of "security infrastructure."

"Perovskite solar cells" are once again emerging at the center of Japan's renewable energy policy. Mr. Takai has proposed "nurturing domestic technology for renewable energy" as part of energy and industrial policy, causing related stocks to attract attention in the market as the "Takai trade." The background to this is Japan's long-standing dependence on foreign-made panels in its renewable energy structure. While inexpensive imports have supported proliferation, they have also left a "negative legacy" of forest development, disposal risks, and price fluctuations. If this continues, both the land and energy supply will be controlled by foreign entities—this sense of crisis is the trigger for policy change. Perovskite solar cells possess the trifecta of being lightweight, highly efficient, and low-cost, making installation in existing buildings easy. Development is progressing as a domestic technology, and it is expected to become a mainstay for self-consumption power generation in the future. Kenneth Energy Development Co., Ltd. is developing a "next-generation self-consumption solar power system" with an eye on these perovskite cells. With over 8,000 installations nationwide and expertise in subsidy support, they are turning companies' "energy independence" into reality.