New product of sealing unit that facilitates electrical work for building renovations and extensions.

Round inspection opening/sealing hole that can be easily installed on the ceiling.

■Features of Ceiling Holes (Construction) 1. Wiring and cabling in the ceiling space can be done from indoors after the ceiling work is completed. 2. Wiring for information communication systems (IT) and various electrical works can be easily done from indoors in the ceiling space. 3. Not only electrical wires, but also piping for air conditioning refrigerants and air ducts can be installed from indoors to the ceiling space. 4. Wiring can be easily done from indoors to the ceiling space without becoming exposed, preserving the interior design of the building, and achieving a neat and aesthetically pleasing finish. 5. Construction time can be reduced by half (1/2) and construction costs can be lowered by one third (1/3), allowing for safe work and easier electrical installations. ■Features of Ceiling Holes (Product) 1. It is a round inspection opening (entry point) that can be installed in ceiling finishing materials. 2. It has a good appearance and can be easily installed with a one-touch mechanism. 3. There is no need for repair work on ceiling finishing materials or ceiling substrate materials, and no specialized contractors are required. 4. It can be installed even in ceilings without substrate materials (such as traditional Japanese room ceilings).

• Inspection hatches, manhole covers, and ditch covers
• Piping and electrical wiring materials
• Interior construction

Electrical work for new construction and renovations can be done easily / Ceiling hole construction technology

■Features of Ceiling Hole Construction Technology 1. Electrical work (ceiling wiring) can be done from inside after the ceiling construction is completed. 2. Wiring and installation of electrical equipment and various sensors for new construction, renovations, and extensions can be easily done from inside. 3. Wiring and installation of electrical equipment and various sensors can be easily done from inside without exposed wiring, preserving the interior design of the building and achieving a neat and aesthetically pleasing finish. 4. Construction time can be reduced (by half), and construction costs can be lowered (by one-third), allowing for safe work and easy electrical construction. 5. Connection verification and inspection can be easily performed from inside, making maintenance tasks easier.

• Inspection hatches, manhole covers, and ditch covers
• Other commercial buildings and service facilities
• Interior construction

Installation and inspection of ceiling-mounted fire detectors can be easily done from indoors / New product for ceiling stands.

■Features of the Ceiling Stand 1. The installation of ceiling-mounted detectors, wiring, and fixture mounting can be completed all at once after the ceiling work is finished. 2. Fire testing, operation confirmation, and installation position verification of ceiling-mounted detectors can be done from indoors. 3. Wiring can be done from indoors to the ceiling space without exposed wiring, maintaining the building's aesthetic and providing a good finish. 4. Shortened construction time (by half), reduced construction costs (by one-third), safer work conditions, and easier installation of fire prevention equipment. 5. Maintenance work and fire prevention management become safer and easier.

• Inspection hatches, manhole covers, and ditch covers
• Other commercial buildings and service facilities
• Manhole body

Fire safety equipment installation for new construction and renovations can be easily done / Sealing stand construction technology

■Features of the Sealing Stand 1. Installation of fire protection equipment, wiring, and mounting of fire detectors can be done collectively after the ceiling work is completed. 2. Wiring in the ceiling and installation of fire detectors for new construction, renovations, and extensions can be easily done from inside the room. 3. Fire tests, confirmation of operation, and verification of installation positions for ceiling detectors can be conducted from inside the room. 4. Wiring and installation of fire protection equipment in the ceiling can be easily done from inside the room without exposed wiring, preserving the interior design of the building and ensuring a neat and tidy finish. 5. Shortened construction time (by half), reduced costs (by one-third), safe work conditions, and easier fire protection equipment installation. 6. Fire tests, confirmation of operation, and verification of installation positions can be conducted from inside the room, making maintenance work safe and easy.

• Inspection hatches, manhole covers, and ditch covers
• Other commercial buildings and service facilities
• Interior construction

New product of sealing unit that facilitates electrical work for building renovations and extensions.

■Features of the Sealing Unit (Installation) 1. Wiring in the ceiling space and the installation of wiring devices can be done from inside the room after the ceiling work is completed. 2. Various electrical works for building renovations and extensions can easily be performed from inside the room for ceiling wiring and the installation of wiring devices. 3. Ceiling wiring and the installation of wiring devices can be easily done from inside the room without exposed wiring, preserving the interior design of the building, and achieving a neat and aesthetically pleasing finish. Additionally, maintenance work becomes easier. 4. Construction time can be reduced by half (1/2) and construction costs can be lowered by a third (1/3), allowing for safe work and easier electrical construction. ■Features of the Sealing Unit (Product) 1. It is a round inspection opening (entry point) with wiring devices that can be installed on ceiling finishing materials. 2. It has a good appearance and can be easily installed with a one-touch mechanism. 3. There is no need for repair work on ceiling finishing materials or ceiling substrate materials, and no specialized contractors are required. 4. It can be installed even on ceilings without substrate materials (such as traditional Japanese room ceilings). 5. The installation or replacement of wiring devices can be easily done on the floor surface instead of the ceiling surface (by removing the cover). 6. Connection checks and inspections can be performed without removing wiring devices, and the direction and arrangement can be freely changed (by removing the cover) (changing the direction of the cover).

• System ceiling
• Unit and other construction

New product for easily inspecting and connecting junctions of ceiling wires from indoors / Junction inspection opening.

■Features of the Joint Inspection Opening (Construction) 1. It can be easily installed from indoors onto the ceiling without any discomfort and with a good appearance. 2. It can be installed on the ceiling surface at the connection (joint) location of the wiring in the ceiling space from indoors. 3. The cover can be opened from indoors, allowing for easy inspection and connection work at the joint of the wiring in the ceiling space. 4. By periodically inspecting the connections of the ceiling wiring, which can be a cause of fire, by opening the cover from indoors, it is possible to prevent equipment damage and fires caused by overheating due to overload or poor connections. 5. The cover can be opened from indoors to perform connection replacement work for miswiring or poor connections of the ceiling wiring, without damaging the ceiling finishing materials. 6. It can be used not only for connecting general electrical wiring but also for connecting communication lines in low-voltage work. ■Features of the Joint Inspection Opening (Product) 1. It is a joint inspection opening that can be installed on ceiling finishing materials. 2. It has a good appearance and can be easily installed with a one-touch mechanism. 3. There is no need for repair work on ceiling finishing materials or ceiling substrate materials, and no specialized contractors are required. 4. It can be installed even on ceilings without substrate materials (such as traditional Japanese room ceilings).

• Inspection hatches, manhole covers, and ditch covers
• Other commercial buildings and service facilities
• Manhole body

The installation of the attic fire alarm can be easily done from indoors. / New product for attic fire alarm brackets.

■Features of Ceiling Space Fire Alarm Bracket (Installation) 1. The installation of the fire alarm in the ceiling space can be easily done from indoors, allowing for early detection of ceiling space fires. 2. The cover can be opened from indoors, making it easy to test and inspect the fire alarm in the ceiling space. 3. A fire alarm can also be installed on the cover, enabling coordination between indoor and ceiling space fire alarms. 4. The installation of the ceiling space fire alarm bracket on the ceiling surface can be easily accomplished. 5. It can be installed neatly and unobtrusively without compromising the building's image. 6. Work such as equipment installation, fire testing, and inspections can be safely performed from indoors without entering the ceiling space. ■Features of Ceiling Space Fire Alarm Bracket (Product) 1. This is a ceiling space fire alarm bracket that can be installed on ceiling finishing materials. 2. It has a good appearance and allows for easy one-touch installation. 3. There is no need for repair work on ceiling finishing materials or ceiling framing materials, and no specialized contractors are required. 4. It can be installed even on ceilings without framing materials (such as traditional Japanese room ceilings).

• Inspection hatches, manhole covers, and ditch covers
• Other commercial buildings and service facilities
• Manhole body

Details of the FaceMe Security 8.3 Update < Revamped UX for Action & Alert Rule Settings > Previously, individual settings were required for each action even within the same rule. By completely overhauling the UI and UX, we have transformed the operation screen to allow for intuitive and efficient configuration. ▶ Key Update Points - Multiple actions (notifications, access control, VMS integration, etc.) can now be set within a single rule. - The settings screen has been consolidated into a single page, allowing for an overview and editing of the entire configuration at a glance. < Enhanced Integration Features with Face Terminal (Facial Recognition Terminal) > FaceMe Security integrates with the MSK Knoctoi series (Standard/Lite), enabling door opening and closing based on facial recognition results without the need for additional devices. This update allows for detailed configuration of door opening and closing rules based on location, time of day, and groups of individuals, enabling more flexible access management tailored to on-site operations. ▶ Expected Implementation Scenarios - All employees can enter the entrance, while only administrators can enter specific areas at night, etc.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. We have many implementation examples available, so please take a look at the case study page.

[To the owners of parking lots and parking lot construction companies] "I'm worried about not colliding with pedestrians when leaving the parking lot in my car..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Departure Warning Sensor] that detects vehicle departures using various sensors and alerts the surroundings with LED lights and buzzers. The device consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *Please note that a separate control panel including the controller and switching power supply (24V) is required when using the departure warning system. *We kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breakers, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. We hope this will contribute to safer vehicle passage for everyone. ◎ For more details, please contact us or download the catalog.

NTT TechnoCross Corporation (Headquarters: Minato-ku, Tokyo, President: Atsuko Oka, hereinafter referred to as "NTT TechnoCross") announced that its health management system "HM-neo" achieved a market share of 18.4% among major companies with 3,000 or more employees in the health management solutions market, according to a survey conducted by Deloitte Tohmatsu Economic Research Institute, Inc. (Headquarters: Chiyoda-ku, Tokyo, President: Shigeo Watanabe) for the fiscal year 2024, securing the No. 1 share.

At a cabaret club located in Kanagawa Prefecture, we have introduced our commercial aroma diffuser "MajestaFragrance." Different scents are created for the floor and the VIP room. After the introduction, we have received feedback from customers saying things like "It's calming" and "It has created an elegant atmosphere." MajestaFragrance not only delivers fragrance but also enhances the overall value of the space. If you are interested in scent design, please feel free to contact us.