Installation and inspection of ceiling-mounted fire detectors can be easily done from indoors / New product for ceiling stands.

Round inspection opening/sealing hole that can be easily installed on the ceiling.

■Features of Ceiling Holes (Construction) 1. Wiring and cabling in the ceiling space can be done from indoors after the ceiling work is completed. 2. Wiring for information communication systems (IT) and various electrical works can be easily done from indoors in the ceiling space. 3. Not only electrical wires, but also piping for air conditioning refrigerants and air ducts can be installed from indoors to the ceiling space. 4. Wiring can be easily done from indoors to the ceiling space without becoming exposed, preserving the interior design of the building, and achieving a neat and aesthetically pleasing finish. 5. Construction time can be reduced by half (1/2) and construction costs can be lowered by one third (1/3), allowing for safe work and easier electrical installations. ■Features of Ceiling Holes (Product) 1. It is a round inspection opening (entry point) that can be installed in ceiling finishing materials. 2. It has a good appearance and can be easily installed with a one-touch mechanism. 3. There is no need for repair work on ceiling finishing materials or ceiling substrate materials, and no specialized contractors are required. 4. It can be installed even in ceilings without substrate materials (such as traditional Japanese room ceilings).

• Inspection hatches, manhole covers, and ditch covers
• Piping and electrical wiring materials
• Interior construction

Electrical work for new construction and renovations can be done easily / Ceiling hole construction technology

■Features of Ceiling Hole Construction Technology 1. Electrical work (ceiling wiring) can be done from inside after the ceiling construction is completed. 2. Wiring and installation of electrical equipment and various sensors for new construction, renovations, and extensions can be easily done from inside. 3. Wiring and installation of electrical equipment and various sensors can be easily done from inside without exposed wiring, preserving the interior design of the building and achieving a neat and aesthetically pleasing finish. 4. Construction time can be reduced (by half), and construction costs can be lowered (by one-third), allowing for safe work and easy electrical construction. 5. Connection verification and inspection can be easily performed from inside, making maintenance tasks easier.

• Inspection hatches, manhole covers, and ditch covers
• Other commercial buildings and service facilities
• Interior construction

Installation and inspection of ceiling-mounted fire detectors can be easily done from indoors / New product for ceiling stands.

■Features of the Ceiling Stand 1. The installation of ceiling-mounted detectors, wiring, and fixture mounting can be completed all at once after the ceiling work is finished. 2. Fire testing, operation confirmation, and installation position verification of ceiling-mounted detectors can be done from indoors. 3. Wiring can be done from indoors to the ceiling space without exposed wiring, maintaining the building's aesthetic and providing a good finish. 4. Shortened construction time (by half), reduced construction costs (by one-third), safer work conditions, and easier installation of fire prevention equipment. 5. Maintenance work and fire prevention management become safer and easier.

• Inspection hatches, manhole covers, and ditch covers
• Other commercial buildings and service facilities
• Manhole body

Fire safety equipment installation for new construction and renovations can be easily done / Sealing stand construction technology

■Features of the Sealing Stand 1. Installation of fire protection equipment, wiring, and mounting of fire detectors can be done collectively after the ceiling work is completed. 2. Wiring in the ceiling and installation of fire detectors for new construction, renovations, and extensions can be easily done from inside the room. 3. Fire tests, confirmation of operation, and verification of installation positions for ceiling detectors can be conducted from inside the room. 4. Wiring and installation of fire protection equipment in the ceiling can be easily done from inside the room without exposed wiring, preserving the interior design of the building and ensuring a neat and tidy finish. 5. Shortened construction time (by half), reduced costs (by one-third), safe work conditions, and easier fire protection equipment installation. 6. Fire tests, confirmation of operation, and verification of installation positions can be conducted from inside the room, making maintenance work safe and easy.

• Inspection hatches, manhole covers, and ditch covers
• Other commercial buildings and service facilities
• Interior construction

New product of sealing unit that facilitates electrical work for building renovations and extensions.

■Features of the Sealing Unit (Installation) 1. Wiring in the ceiling space and the installation of wiring devices can be done from inside the room after the ceiling work is completed. 2. Various electrical works for building renovations and extensions can easily be performed from inside the room for ceiling wiring and the installation of wiring devices. 3. Ceiling wiring and the installation of wiring devices can be easily done from inside the room without exposed wiring, preserving the interior design of the building, and achieving a neat and aesthetically pleasing finish. Additionally, maintenance work becomes easier. 4. Construction time can be reduced by half (1/2) and construction costs can be lowered by a third (1/3), allowing for safe work and easier electrical construction. ■Features of the Sealing Unit (Product) 1. It is a round inspection opening (entry point) with wiring devices that can be installed on ceiling finishing materials. 2. It has a good appearance and can be easily installed with a one-touch mechanism. 3. There is no need for repair work on ceiling finishing materials or ceiling substrate materials, and no specialized contractors are required. 4. It can be installed even on ceilings without substrate materials (such as traditional Japanese room ceilings). 5. The installation or replacement of wiring devices can be easily done on the floor surface instead of the ceiling surface (by removing the cover). 6. Connection checks and inspections can be performed without removing wiring devices, and the direction and arrangement can be freely changed (by removing the cover) (changing the direction of the cover).

• System ceiling
• Unit and other construction

New product for easily inspecting and connecting junctions of ceiling wires from indoors / Junction inspection opening.

■Features of the Joint Inspection Opening (Construction) 1. It can be easily installed from indoors onto the ceiling without any discomfort and with a good appearance. 2. It can be installed on the ceiling surface at the connection (joint) location of the wiring in the ceiling space from indoors. 3. The cover can be opened from indoors, allowing for easy inspection and connection work at the joint of the wiring in the ceiling space. 4. By periodically inspecting the connections of the ceiling wiring, which can be a cause of fire, by opening the cover from indoors, it is possible to prevent equipment damage and fires caused by overheating due to overload or poor connections. 5. The cover can be opened from indoors to perform connection replacement work for miswiring or poor connections of the ceiling wiring, without damaging the ceiling finishing materials. 6. It can be used not only for connecting general electrical wiring but also for connecting communication lines in low-voltage work. ■Features of the Joint Inspection Opening (Product) 1. It is a joint inspection opening that can be installed on ceiling finishing materials. 2. It has a good appearance and can be easily installed with a one-touch mechanism. 3. There is no need for repair work on ceiling finishing materials or ceiling substrate materials, and no specialized contractors are required. 4. It can be installed even on ceilings without substrate materials (such as traditional Japanese room ceilings).

• Inspection hatches, manhole covers, and ditch covers
• Other commercial buildings and service facilities
• Manhole body

The installation of the attic fire alarm can be easily done from indoors. / New product for attic fire alarm brackets.

■Features of Ceiling Space Fire Alarm Bracket (Installation) 1. The installation of the fire alarm in the ceiling space can be easily done from indoors, allowing for early detection of ceiling space fires. 2. The cover can be opened from indoors, making it easy to test and inspect the fire alarm in the ceiling space. 3. A fire alarm can also be installed on the cover, enabling coordination between indoor and ceiling space fire alarms. 4. The installation of the ceiling space fire alarm bracket on the ceiling surface can be easily accomplished. 5. It can be installed neatly and unobtrusively without compromising the building's image. 6. Work such as equipment installation, fire testing, and inspections can be safely performed from indoors without entering the ceiling space. ■Features of Ceiling Space Fire Alarm Bracket (Product) 1. This is a ceiling space fire alarm bracket that can be installed on ceiling finishing materials. 2. It has a good appearance and allows for easy one-touch installation. 3. There is no need for repair work on ceiling finishing materials or ceiling framing materials, and no specialized contractors are required. 4. It can be installed even on ceilings without framing materials (such as traditional Japanese room ceilings).

• Inspection hatches, manhole covers, and ditch covers
• Other commercial buildings and service facilities
• Manhole body

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

From measurement instruments to point cloud processing and analysis software, the latest solutions come together! We propose numerous cutting-edge technologies and products that solve on-site challenges in a one-stop manner. It's not just about seeing; it's about experiencing, consulting, and bringing it back to the field. At the venue, we will showcase the latest measurement instruments and solutions, including 3D laser scanners, handheld 3D scanners, LiDAR drones, and 3DGS (Gaussian Splatting). Additionally, we will announce surprise new products!

We have updated the article on the website of the semi-custom system construction "Select Beam." When planning factories, logistics warehouses, and stores, "system construction" has become an effective means of achieving cost reduction and shortening construction periods. The rationality of system construction through thorough standardization is very high, and it is adopted in many projects. However, due to the differing characteristics of each manufacturer, many business owners find themselves wondering, "Which manufacturer is suitable for our plans?" and "Is it really optimal compared to conventional methods?" In this article, we will compare and introduce the basic knowledge of the advantages and disadvantages of system construction, as well as recommend manufacturers by purpose in a ranking format. ■ Semi-Custom System Construction "Select Beam" This is a unique method by Sakura Structure, and it is a "third option" that is less expensive than system construction. It is the most suitable method for low-rise long-span buildings such as stores, warehouses, factories, and logistics facilities, as well as high-rise buildings like hotels.

"Because the ground is poor, we have no choice but to use a structural slab." Such fixed notions of "over-design" unnecessarily drive up construction costs. In large space buildings such as warehouses, factories, and stores, the choice of floor slab type is one of the most significant variables affecting construction costs. What is important is to compare and verify the advantages and risks of each type, and to derive the optimal solution that is "suitable for the purpose" for the entire building. By reading this content, you will understand the following points: - Characteristics of the five main construction methods with different support forms - Recommended situations for adoption - Cost comparison examples of floor slabs "I am struggling with the dilemma of floor settlement risks and costs on weak ground." "I want to know the optimal solution for the site without being tied to a specific construction method." Construction companies and general contractor representatives facing such issues are encouraged to take a look.

Our company will be exhibiting at the "Hokuriku Technology Exchange Techno Fair 2026." Dates: October 23rd, 10:00 AM - 5:00 PM October 24th, 10:00 AM - 4:00 PM Venue: Fukui Prefectural Industrial Hall We look forward to your visit.