New product for abnormal temperature control device that cuts off the power circuit at abnormal temperatures in industrial equipment.

Unmanned operation of industrial machinery in factories can be done safely / New product for abnormal temperature monitoring panel.

■Features of the Abnormal Temperature Monitoring Panel 1. Enables safe unmanned operation of industrial machinery and equipment in factories. 2. Detects abnormal temperatures in industrial equipment, cuts off the power circuit, and prevents damage to equipment and fires in advance. 3. Allows for continuous daily monitoring of abnormal temperatures in factory industrial equipment, ensuring reliable and safe maintenance management. 4. Can cut off the power circuit at abnormal temperatures regardless of the main power capacity (load capacity). 5. An eco-friendly abnormal temperature monitoring panel with zero standby power. The electrical circuit configuration is simple and can be produced at a low cost. 6. Can be installed in factory industrial machinery and equipment, serving as safety management equipment during ISO updates. ■Features of the Temperature Detection Sensor 1. Combines and integrates shape memory alloy with electric wires, using the softening of the wire and the restoration of the shape memory alloy to detect temperature by short-circuiting (contacting) the two wire cores, generating a signal. The set temperature is the maximum allowable temperature of the wire. (60℃・75℃) 2. Simple, easy, and accurate, with a switching function that utilizes eco-friendly technology with zero standby power. 3. The shape memory alloy has permanent memory and is rust-free, maintaining its state once activated. 4. Operates without the need for power through physical action, ensuring no malfunction and allowing for swift, precise use over many years. 5. Non-resettable, allowing for confirmation after activation.

• Other security systems
• Architectural design office

New product for abnormal temperature control device that cuts off the power circuit at abnormal temperatures in industrial equipment.

■Features of the Abnormal Temperature Control Device 1. It can detect abnormal temperatures in industrial machinery, cut off the power circuit, and prevent equipment damage and fires before they occur. 2. It allows for continuous monitoring of abnormal temperatures in industrial machinery, ensuring reliable and safe maintenance management. 3. The power circuit can be cut off due to abnormal temperatures regardless of the main power capacity. 4. It enables safe unmanned operation of industrial machinery in factories. 5. It can be installed in industrial machinery in factories as a safety management device during ISO updates. 6. It is an eco-friendly abnormal temperature control device with zero standby power. ■Features of the Temperature Sensing Wire 1. It utilizes extended wires (softening) and numerous shape memory alloys (restoration) to create a short circuit (contact) between the two wire cores, detecting abnormal temperatures and generating a signal. The set temperature is 80°C. 2. It is a simple, easy-to-use product with good accuracy, featuring a switching function that allows for zero standby power. 3. The shape memory alloy has permanent memory, is rust-free, and retains its state indefinitely once activated. 4. The operation is a physical action that requires no power, ensuring no malfunctions and allowing for swift, accurate use over many years. 5. It is a non-resettable type that allows for confirmation after activation (once activated, it cannot be reactivated; the activated area must be deleted and reconnected). 6. It is a product that meets the performance standards of type 1 fixed temperature detectors (120 seconds) as specified by fire safety regulations.

• Other security systems
• Architectural design office

New product of temperature sensing wire integrated with multiple temperature memory sensors.

■Features of Temperature Sensing Wire 1. It can directly sense temperature and generate signals through physical operation without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. It allows for routine monitoring of various abnormal temperatures, ensuring reliable and safe maintenance management. 4. It can detect abnormal temperatures in various devices early, preventing equipment damage and fires. 5. By simply extending the wiring, it can provide extensive monitoring of abnormal temperatures. 6. It can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 7. It is a product that integrates a large number of shape memory alloys at regular intervals along the extended wire. 8. Utilizing the softening of the wire and the recovery of the shape memory alloy, it senses temperature by short-circuiting the two wires and generates a signal. 9. It is a simple, easy-to-use, and accurate eco-technology product with zero standby power due to its switching function. 10. The shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated, allowing for long-term use. 11. It is a product that meets the performance standards of fixed-temperature type detectors as specified by fire safety regulations (120 seconds). 12. It is a non-resettable type that allows for confirmation after activation (once sensing is activated, it cannot be reactivated; the activated location must be deleted and reconnected).

• Facility Design

Thank you very much for always using Majesta Fragrance. Our company will be open as usual during the Obon period. Please feel free to contact us for inquiries about scent arrangements or the introduction of commercial aroma diffusers.

High Strength, Low Cost: The Economic Advantages of Carbon Steel Frames Carbon steel is inherently strong, and this high structural strength ensures stable wind resistance while allowing for a simple support structure, reducing the need for extra components. This also lowers the wear rate during transportation, enabling further savings in material costs and installation expenses. Transportation and Construction: Streamlining the Entire Project The advantages of carbon steel frames are also evident in the transportation and construction phases. Standardized designs simplify on-site installation and shorten construction periods. For example, carbon steel frames can be packaged using a combination of wooden sticks and iron ties, improving unloading efficiency and increasing transport volume. This reduces construction time and labor costs, distributing the overall burden of the project across all stages. Technological Innovation: Breakthroughs in Corrosion Resistance With the evolution of material technology, the corrosion treatment of carbon steel frames has also significantly advanced. Grace Solar has adapted to the technological trends in process development, and all current carbon steel frames utilize AlMgZn coating. At the same time, to meet the special requirements of each project, our company offers custom options for hot-dip galvanizing.

#Intersolar South America - We invite you to attend the most influential solar energy event in Latin America. You will be able to see innovative solar mounting solutions designed for the Latin American market. At booth R2.82, Grace Solar will showcase how it is evolving regional solar projects: - Ground-mounted solar mounting systems suitable for Brazil's tropical storms and humid environments - Flexible roof installation systems that can accommodate diverse architectural needs Let's build the future of solar power together! Venue: Expo Center Norte, São Paulo, Brazil, Booth R2.82 Date: August 26-28, 2025

We have introduced the commercial aroma diffuser "Majesta Fragrance" to a cabaret club in Tokyo. The selected scent is "Royale," which offers a sense of calm and elegance. It spreads naturally throughout the floor, creating a high-quality space that satisfies the five senses. Majesta Fragrance is available for a free trial installation exclusively in the Kanto area. If you are interested in enhancing your store's scent experience, please feel free to contact us.

We have released a catalog for a trial version of a conceptual skills course designed to efficiently develop logical thinking and problem-solving skills in a short period. The course is structured in three levels, from basic to practical and applied, supporting skill enhancement directly related to work through video viewing, exercises, and detailed feedback. There is also a free trial version available, lasting about 10 to 20 minutes, allowing you to easily check the course content and approach. It is ideal for promotion and advancement exam preparation, as well as for developing the next generation of leaders, with a proven track record in many companies. For detailed materials or to apply for the trial version, please use the link below. Feel free to take advantage of it!