Battery abnormal temperature detection alarm / New product of battery abnormal temperature alarm device

Optimal safety measures for abnormal temperatures in storage batteries / New product for storage battery alarm systems

■Features of the Battery Alarm System 1. A temperature sensing wire (70°C) is installed on the outer wall of the battery or the power line, allowing for monitoring and alarming of abnormal temperatures. 2. The abnormal temperature of the battery is continuously monitored on a daily basis, enabling early detection and safe response. 3. Inspection and maintenance of battery equipment can be carried out reliably and safely. 4. This is the ideal "Battery Alarm System" for safety measures against abnormal temperatures in batteries. 5. It is a "Battery Alarm System" that combines a compact alarm panel with a temperature sensing wire (70°C). 6. This product meets the performance standards of a fixed temperature type detector (Type 1, 120 seconds) as specified by fire safety regulations. ◆Features of the Temperature Sensing Wire 1. It can directly sense temperature and emit signals through physical operation without the need for power sources or measuring instruments. 2. When the surrounding temperature reaches the set temperature (70°C), the two wires short-circuit to sense the temperature and generate a signal. 3. It can be wired similarly to electrical equipment wires and can be used for both indoor and outdoor wiring. 4. This product integrates numerous shape memory alloys at equal intervals along the wire. 5. It is simple, easy to use, has good accuracy, and employs eco-technology with zero standby power through its switching function. 6. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Power generation equipment
• Substation equipment
• Power distribution and control panels

Battery abnormal temperature detection alarm / New product for battery abnormal temperature alarm device

■Features of the Abnormal Temperature Alarm for Batteries 1. Capable of detecting and alarming for abnormal temperatures in each battery. 2. An eco-technology that can detect and alarm for abnormal temperatures in each battery with zero standby power. 3. Allows for regular centralized monitoring of abnormal heat (abnormal temperatures) in each battery. 4. Battery equipment inspection tasks can be performed by anyone, ensuring reliable and safe maintenance management. 5. Detects abnormal temperatures in each battery and alerts through an alarm to prevent equipment damage and fires. 6. A product that integrates numerous shape memory alloys at equal intervals along an extended wire. 7. Utilizes the softening of the wire and the recovery of the shape memory alloy to short-circuit between two wires for temperature sensing and signaling. 8. The shape memory alloy has permanent memory, is rust-free, and can be used for many years once activated. 9. Direct temperature sensing and signaling can be achieved through physical operation without the need for power sources or measuring instruments. 10. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and signal. 11. Can be wired similarly to electrical equipment wiring, suitable for both indoor and outdoor wiring. 12. A product that meets the performance standards of type 1 fixed temperature detectors as specified by fire safety regulations. 13. Non-resettable, allowing for confirmation after activation (once activated, it cannot be reactivated; the activated location can be deleted and reconnected).

• Power generation equipment
• Substation equipment
• Power distribution and control panels

A new product for temperature sensing (70℃) that can directly sense temperature and signal through a physical operation without the need for power.

■Features of Temperature Sensing Wire (70℃) 1. It can directly sense temperature and generate a signal through physical operation without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches 70℃, the two wires short-circuit to sense the temperature and generate a signal. 3. It allows for the collective monitoring of various abnormal temperatures on a daily basis, ensuring reliable and safe maintenance management. 4. It can detect abnormal temperatures in various devices early, preventing equipment damage and fires. 5. By simply extending the wiring, it enables extensive abnormal temperature monitoring. 6. It can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 7. It is a product that integrates a large number of shape memory alloys at regular intervals along the extended wire. 8. Utilizing the softening of the wire and the recovery of the shape memory alloy, it senses temperature by short-circuiting the two wires and generates a signal. 9. It is a simple, easy-to-use, and highly accurate eco-technology product with zero standby power due to its switching function. 10. The shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated, allowing for long-term use. 11. It is a product that meets the performance standards of fixed temperature detectors type 1 (120 seconds) as specified by fire safety regulations. 12. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reset. The activated location can be deleted and reconnected.)

• Facility Design

Detecting abnormal heat (abnormal temperature) of batteries with standby power at 0 / New product for battery temperature detection sensors

■Features of Temperature Detection Sensors for Storage Batteries 1. It can continuously monitor and detect abnormal heat generation (abnormal temperature) of storage batteries. 2. It can continuously monitor and detect abnormal temperatures of wires and electrical equipment in the charging/discharging circuit of storage battery systems. 3. Inspection tasks for storage battery systems can be performed by anyone, ensuring reliable and safe maintenance management. 4. By utilizing shape memory alloy (restoration) and wire (softening) to create a short circuit (contact) between two wires, it detects abnormal temperatures (maximum allowable temperature) and generates a signal. [Set temperature: 70°C] 5. It is a simple, easy, and accurate eco-technology product with zero standby power due to its switching function. 6. It can detect temperature and generate signals simultaneously, with a simple circuit configuration (switching function) at a low cost. 7. Shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated. 8. Operation is based on physical action that requires no power supply, ensuring no malfunction and allowing for swift, accurate use over many years. 9. Direct temperature detection is possible without the need for measuring instruments. 10. It is a non-resettable type that allows for confirmation after activation. (Once detected, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Power generation equipment
• Substation equipment
• Power distribution and control panels

The seismic sensor device "HK-2" detects strong tremors equivalent to a seismic intensity of 5 or higher, transmits a signal to the control room, and emergency stops the facility equipment. 【Installation Location】 Automotive parts factory 【Challenges】 Due to the maintenance and replacement of the factory equipment control devices, we considered updating the existing seismic sensors as well, but since production had already ended, we were looking for alternatives. 【Effects After Installation】 The HK-2 has the function to emergency stop equipment during an earthquake, and since its functionality is the same as the existing device, it was introduced as a replacement. Its compact size also allowed it to fit within the existing control panel being used. ★See more examples of the seismic sensor device "HK-2" https://www.hotron.co.jp/recommend/HK-2_lp.html#anchor_a04 ◎For more details, please download the materials or contact us.

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

In facilities operating nurse call systems, we have made bed exit sensors wireless, allowing them to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ Bed exit sensors notify wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

We have renewed our brochure regarding "Soil Contamination Investigation and Measures." Soil contamination investigation and measures require complex and specialized knowledge, including legal regulations, investigation obligations, and countermeasure methods. In this brochure, we have systematically organized the overview of legal regulations and various countermeasures to make it easier for those unfamiliar with the Soil Contamination Countermeasures Act and the Water Pollution Prevention Act to understand. Additionally, we have included a flowchart indicating "when soil investigation is necessary," allowing businesses to grasp the relevant situations for themselves. By clarifying "what needs to be done now," we support decision-making for companies engaged in environmental risk management. The structure is designed to be easy to understand even for those encountering the Soil Contamination Countermeasures Act for the first time, so please take a look. For more details, please refer to the news page on our company website linked in the related links section. 【Contact Information】 Mitsubishi Material Tech Corporation, Sales Planning Department (Weekdays 9 AM - 5 PM) 03-6628-6905 or contact form

"This company has a nice atmosphere..." The reason might be the "scent" of the space. Why scent in the office now? Just by introducing scent, the quality of the office dramatically improves. 1. Visitor Reception: Enhancing the Quality of Hospitality Just having a pleasant scent wafting through the entrance and reception room gives visitors a positive first impression of a company that pays attention to detail. 2. Increased Concentration: Towards a More Productive Workplace Scent directly brings relaxation and refreshment effects to the brain. It supports mood changes during work breaks and helps maintain concentration during long hours of desk work, leading to improved employee performance. 3. Enhanced Corporate Image (Branding) The memory of "that office always has a nice scent" quietly and surely enhances the company's brand image. It becomes a powerful tool for differentiating from other companies. Start with a "Free Trial Installation" If you want to improve the atmosphere of your office and create a more comfortable working environment for your employees, why not try the power of scent? Please feel free to contact us.