New safety alarm for use in construction site safety equipment.

Newly released safety alarms for use in construction site safety equipment.

■Features of the Safety Alarm 1. It can issue emergency alarms during accidents or health issues, as well as fire alarms after the use of open flames. 2. This product combines a security alarm with a fire memory sensor, set at a temperature of 80°C. 3. It is a compact, portable, eco-friendly product with zero standby power that integrates both emergency and fire alarms. 4. Extremely compact and lightweight, making it convenient to carry, and very easy to operate. 5. It can be freely carried and installed (hung, placed, or carried), allowing for versatile usage according to needs. 6. It can be easily installed in areas at construction sites where there is a risk of fire. 7. This product meets the performance standards of type 1 fixed temperature detectors (120 seconds) as specified by fire safety regulations. ■Features of the Fire Memory Sensor 1. The fire memory sensor employs switching technology for zero standby power, making it eco-friendly. 2. The shape memory alloy has permanent memory and is rust-free, maintaining its state once activated. 3. The operation requires no power supply and is based on physical action, ensuring no false activations and allowing for precise and reliable use over many years. 4. It is a non-resettable type, allowing for confirmation after activation (once activated, it cannot be reactivated; the activated area must be deleted and reconnected).

• Safety and consumables
• Disaster prevention supplies
• Safety Supplies

Early detection of fires caused by the use of fire at construction sites / New product for construction fire alarms

■Features of Construction Fire Alarm System 1. This is a construction fire alarm system that combines fire detection wires and alarms. It is an eco-friendly product with zero standby power. 2. By simply extending and wiring the fire detection wires, a wide fire alert area can be established, completing the installation. 3. It can quickly detect fires caused by the use of flammable materials at construction sites. 4. It can be easily installed in areas where flammable materials are used at construction sites. Installation and relocation are simple. 5. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to detect temperature and send a signal. 6. It directly senses temperature and sends signals through physical operation without the need for power sources or measuring devices. 7. It can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 8. The product integrates numerous shape memory alloys at equal intervals of 0.5m along the wire (set temperature 80°C). 9. It utilizes the softening of the wire and the recovery of the shape memory alloy to short-circuit the two wires, detect temperature, and send a signal. 10. The shape memory alloy has permanent memory, is rust-free, and can be used for many years once activated. 11. This product meets the performance standards of type 1 fixed temperature detectors (120 seconds) as specified by fire safety regulations. 12. It is a non-resettable type that allows for confirmation after activation (once activated, it cannot be reactivated; the activated location must be deleted and reconnected).

• Safety and consumables
• Disaster prevention supplies
• Safety Supplies

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition mainly in the BtoB (business-to-business) sector. On September 23, 2025 (Tuesday), they published a page titled "Easier to Optimize the Allocation of Management Resources!? 'Product Portfolio Management (PPM)'". 'Product Portfolio Management' allows for the optimal allocation of management resources by evaluating one's business along two axes: "market growth potential" and "market share," and classifying it into four quadrants. The page explains the benefits that can be realized by utilizing it, the two axes and four quadrants that make it up, and the associated risks. (Page Overview: Excerpts) ■ What is 'Product Portfolio Management'? ■ What can be achieved through 'PPM'? ■ Components of 'PPM' (vertical and horizontal axes) ■ Components of 'PPM' (four quadrants) ■ Two risks associated with 'PPM' (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/ppm-2025-09/

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK