Announcement of Online Shop Opening

Hirai Electric Meter Standard Product: Current withstand 75 times/1 second, overcurrent constant n>10

This is a current transformer for circuits with a maximum voltage of up to 7.2kV/6.9kV. If you require an overcurrent intensity of 75 times/1 second and an overcurrent constant of n>10, you can use this series. It is primarily manufactured in accordance with JIS C 1731-1/JEC-1201, but we can accommodate special specifications such as multiple taps or tertiary windings upon request. Production location: Made in Japan (Kyoto)

• Substation equipment
• Power distribution and control panels

Rated withstand current 12.5kA/0.125s and 12.5kA/0.25s current transformer JIS C 4620 (Appendix)

Current Transformers for Cubicle-Type High Voltage Receiving Equipment ECT-S12.5KA Series Common Specifications ■ Compliance Standards: JIS C 4620 (Appendix) ■ Rated Current: 10A/5A, 15A/5A, 20A/5A, 25A/5A, 30A/5A, 40A/5A, 50A/5A 75A/5A, 100A/5A, 120A/5A, 150A/5A, 200A/5A ■ Rated Load: 10VA or 25VA or 40VA ■ Rated Overcurrent Constant: n>10 ■ Rated Frequency: 50Hz/60Hz ■ Accuracy Class: 1.0/1PS ■ Rated Short-Circuit Current: (1) ECT-S12.5KA-A Series = 12.5kA/0.125s or 12.5kA/0.16s common (2) ECT-S12.5KA-B Series = 12.5kA/0.25s

• Substation equipment
• Power distribution and control panels

Hirai Electric Meter Standard Product: Current withstand 150 times/1 second, overcurrent constant n>10

This is a current transformer for circuits with a maximum voltage of up to 7.2kV/6.9kV. If you require an overcurrent intensity of 150 times/1 second and an overcurrent constant of n>10, you can use this series. It is primarily manufactured in accordance with JIS C 1731-1/JEC-1201, but we can accommodate special specifications such as multiple taps or tertiary windings upon request. Production location: Made in Japan (Kyoto)

• Substation equipment
• Power distribution and control panels

Hirai Electric Meter Standard Product: Current Resistance 500 times/1 second & 800 times/1 second

This is a current transformer for circuits with a maximum voltage of up to 7.2kV/6.9kV. For overcurrent intensity of 500 times/1 second and overcurrent constant n>10, you can use model ECT-1000A1. For overcurrent intensity of 800 times/1 second and overcurrent constant n>5, you can use model ECT-1000A. The basic design complies with JIS C 1731-1/JEC-1201, but we can accommodate special specifications such as multiple taps or tertiary windings upon request. Place of production: Made in Japan (Kyoto).

• Substation equipment
• Power distribution and control panels

Hirai Electric Meter Standard Product: Standard 50VA with Fuse

This is a standard instrument transformer rated for a load of 50VA, suitable for circuits with a maximum voltage of up to 7.2kV/6.9kV. As of 2012, it has a delivery record of 50 years since manufacturing began, making it one of the long-established epoxy-molded instrument transformers in Japan. It is primarily compliant with JIS/JEC standards, but can also accommodate overseas standards upon request. Place of production: Made in Japan (Kyoto).

• Power generation equipment
• Substation equipment
• Power distribution and control panels

We have introduced our commercial aroma diffuser "Majesta Fragrance" at a karaoke bar located in the city. The model we installed is [MF-02S]. From the moment customers open the door, a gentle fragrance spreads throughout the store, enhancing the atmosphere. We hope to create a memorable store that customers will want to visit again through the use of fragrance. Majesta Fragrance is available for a free trial installation exclusively in the Kanto area. If you are interested in our fragrance services, please feel free to contact us.

We have introduced our Majesta Fragrance in the restrooms of a company located in the city. The model we implemented is the compact-sized MFmini. By adding fragrance to the clean space, we have created an environment where users can spend their time more comfortably. The restroom, which is used daily, has become a more pleasant and high-quality space.

Thank you very much for always using Majesta Fragrance. Our company will be open as usual during the Obon period. Please feel free to contact us for inquiries about scent arrangements or the introduction of commercial aroma diffusers.

High Strength, Low Cost: The Economic Advantages of Carbon Steel Frames Carbon steel is inherently strong, and this high structural strength ensures stable wind resistance while allowing for a simple support structure, reducing the need for extra components. This also lowers the wear rate during transportation, enabling further savings in material costs and installation expenses. Transportation and Construction: Streamlining the Entire Project The advantages of carbon steel frames are also evident in the transportation and construction phases. Standardized designs simplify on-site installation and shorten construction periods. For example, carbon steel frames can be packaged using a combination of wooden sticks and iron ties, improving unloading efficiency and increasing transport volume. This reduces construction time and labor costs, distributing the overall burden of the project across all stages. Technological Innovation: Breakthroughs in Corrosion Resistance With the evolution of material technology, the corrosion treatment of carbon steel frames has also significantly advanced. Grace Solar has adapted to the technological trends in process development, and all current carbon steel frames utilize AlMgZn coating. At the same time, to meet the special requirements of each project, our company offers custom options for hot-dip galvanizing.

#Intersolar South America - We invite you to attend the most influential solar energy event in Latin America. You will be able to see innovative solar mounting solutions designed for the Latin American market. At booth R2.82, Grace Solar will showcase how it is evolving regional solar projects: - Ground-mounted solar mounting systems suitable for Brazil's tropical storms and humid environments - Flexible roof installation systems that can accommodate diverse architectural needs Let's build the future of solar power together! Venue: Expo Center Norte, São Paulo, Brazil, Booth R2.82 Date: August 26-28, 2025