We will be exhibiting at the 2013 Electrical Installation Industry Exhibition.

[Demo unit available] A laser rangefinder that can instantly measure distances from 0m to 1000m (reflective targets can be detected up to 2000m) with easy operation.

I have been waiting for a distance meter like this. The TruPulse 200 is a laser distance meter that incorporates a digital inclinometer, allowing you to measure "straight line," "horizontal," "vertical," "slope angle," and "height between two points" with simple operations. For example, it can measure the height from the 15th floor to the 7th floor of a distant building easily, without the need for reflectors or anything else.

• Distance measuring device/length measuring device

[Demo unit available] Completely waterproof. Firm grip with both hands, measuring distance over 1500m.

Portable Laser Rangefinder LightSpeed Elite 1M1600 All-weather type. A high-performance laser rangefinder equipped with a 100% fully waterproof optical system and two measurement environment modes. Stable horizontal design with a low center of gravity, reducing hand shake during long-distance measurements and making it easier to capture targets. 7x magnification. 100% fully waterproof and suitable for all weather conditions. High-contrast red display for excellent visibility. Features a Bullseye mode to prevent misrecognition of backgrounds when measuring small targets, a Bush mode that prioritizes and detects laser reflections from the farthest point, and a Scan mode that automatically assists measurements when reflections from the target are weak. LightSpeed is a portable laser rangefinder that allows for distance measurement without the need for reflectors and can be operated by one person. All measurement values are displayed in the line of sight, allowing you to work with the push of a button without taking your eyes off the target. It is equipped with the latest microprocessor and high-speed clock distance measurement board, ensuring rapid measurement operations. The body is compactly designed based on ergonomic principles. The serial number is registered in Japan, providing long-term support for repairs and maintenance.

• Audio and video equipment

[Demo machine available] Aesthetic cuts of all piping tubes without burrs. The three-stage guide supports materials of 16mm, 20mm, and 25mm.

EDMA is a manufacturer specializing in hand tools, founded in France in 1937. With years of expertise and uniqueness honed in the French construction industry, EDMA tools are beginning to make their mark in Japanese workplaces, responding to the demands of reliable on-site work. The EDMA Trio-Cut pipe cutter is a hand tool that features a rotating guide for three sizes (diameters of 16, 20, and 25 mm) in one, achieving improved work efficiency with its 3-in-1 design.

• Work tools
• Water Supply Facilities

[Demo unit available] A fusion of forged chrome-molybdenum steel and a long-lasting power handle. A cutting tool named "Aviator" that comes from France.

EDMA is a manufacturer specializing in hand tools, founded in France in 1937. With years of experience honed in the French construction industry, EDMA tools embody unique craftsmanship and reliability. These tools are beginning to make their mark in Japanese job sites, responding to the demands of precise fieldwork. The EDMA Metal Cutter, a manual tool, features a saw blade and compound action that allows for smooth cutting operations, making it a versatile cutting hand tool capable of all-direction cuts.

• Hardware Doors, Handles and Locks
• Work tools
• Water Supply Facilities

【Demo machine compatible】 Long cut type with a blade length of 75mm. Ideal for cutting P tiles as well.

EDMA is a manufacturer specializing in hand tools, founded in France in 1937. With years of experience honed in the French construction industry, EDMA tools are known for their craftsmanship and uniqueness. These reliable tools are beginning to make their mark in Japanese job sites as well. The EDMA Metal Cutter, the Flyer S, features a saw blade (160 teeth, blade hardness HRC 59-62) and is characterized by its complex action that allows for smooth cutting operations, making it a versatile cutting hand tool capable of all-direction cuts.

• Work tools
• Water Supply Facilities
• Tile work

[Demo unit available] Powerful hand tool designed for right curves.

EDMA is a manufacturer specializing in hand tools, founded in France in 1937. With years of expertise and uniqueness honed in the French construction industry, EDMA tools are beginning to make their mark in Japanese job sites, responding to the demands of reliable on-site work. The Metal Cutter EDMA Manual Tool Apollo Light Cut is a cutting hand tool designed for powerful right curve cuts with a blade length of 42mm. It features a 96-tooth saw blade and a composite action for easy cutting.

• Work tools
• Water Supply Facilities
• Tile work

[Demo machine available] Powerful hand tool designed for left curves.

EDMA is a manufacturer specializing in hand tools, established in France in 1937. With years of experience honed in the French construction industry, EDMA tools are known for their craftsmanship and uniqueness. These reliable tools are beginning to make their mark on job sites in Japan as well. The EDMA metal cutter, Apollo Left Cut, is a cutting hand tool designed for powerful left curve cuts with a blade length of 42mm. It features a 96-tooth saw blade and a composite action for easy cutting.

• Work tools
• Water Supply Facilities
• Tile work

[Demo unit available] The wave plate head has expanded the working range.

EDMA is a manufacturer specializing in hand tools, founded in France in 1937. With years of experience and unique techniques honed in the French construction industry, EDMA tools are now beginning to make their mark on job sites in Japan, responding to the demands of reliable on-site work. The Metal Cutter EDMA Super Cop NR3 is a metal cutting hand tool designed for corrugated sheets, with a cutting trace of 2.7mm. It features warp-free cutting, a scrap cutting blade curl cutter, and a curl protector that neatly rolls up the scraps.

• Work tools
• Water Supply Facilities
• Tile work

[Demo machine available] Cut metal without bending by supporting with the head! Integrated curl cutter allows for opening work as well.

EDMA is a manufacturer specializing in hand tools, founded in France in 1937. With years of expertise and uniqueness honed in the French construction industry, EDMA tools are now starting to make their mark in Japanese job sites, responding to the demands of reliable on-site work. The EDMA Metal Cutter Super Cop NR1 features a cutting depth of 2.7mm, supported by a tough tip unit head, allowing for metal cutting without warping. It offers warp-free cutting, a scrap-cutting blade curl cutter, and is equipped with a curl protector that neatly rolls up the scraps.

• Work tools
• Water Supply Facilities
• Unit and other construction

[Demo machine available] Cuts wood, moldings, rubber, and PVC at any angle. Angled cutting tool miter shear.

EDMA is a manufacturer specializing in hand tools, founded in France in 1937. With years of expertise and uniqueness honed in the French construction industry, EDMA tools are beginning to make their mark in Japanese job sites, responding to the needs of reliable on-site work. PVC Cutter EDMA Hand Tool Multi-Cut Extra A cutting tool that allows for precise angle cutting with a plate marked with angle scales. It features a single blade that is 65mm long.

• Work tools
• Water Supply Facilities

[Demo machine available] A hand tool that cuts without altering the shape of square PVC or partitioned square moldings.

EDMA is a manufacturer specializing in hand tools, founded in France in 1937. With years of experience and unique techniques honed in the French construction industry, EDMA tools are now beginning to make their mark on job sites in Japan, responding to the demands of reliable on-site work. PVC Cutter EDMA Hand Tool Perfect Cut 90 This cutting tool features a cutting section designed to match the shape of rectangular materials, allowing for cutting without distorting the material's shape. The shape holder secures the material, enabling cuts at a 90° angle.

• Work tools
• Water Supply Facilities

[Demo machine available] Leave the work of creating circular openings to us. We can drill a hole up to 305mm in diameter.

EDMA is a manufacturer specializing in hand tools, founded in France in 1937. With years of experience and uniqueness honed in the French construction industry, EDMA tools are now starting to make their mark in Japanese job sites, responding to the demands of reliable on-site work. The EDMA metal cutter is a hand tool designed for round cutting, featuring a powerful 4.7mm drill that can cut perfect circles of any size (diameter 51 to 305mm). Its slim design makes it convenient for transportation.

• Work tools

[Demo unit available] Smooth chamfering with angle adjustment from 22° to 45°. Not only can the angle be adjusted, but also the depth of the chamfer, making it an excellent product.

EDMA is a manufacturer specializing in hand tools, founded in France in 1937. With years of experience and uniqueness honed in the French construction industry, EDMA tools are beginning to make their mark in Japanese job sites, responding to the demands of reliable on-site work. The EDMA drywall tool, a hand tool, features a chamfering plane and a lap rack, which is ideal for quick chamfering of drywall. It allows for chamfering at angles ranging from 22° to 45°. The reversible design can be used for chamfering on both sides.

• Work tools

Firmly clamp with the wheel blade and deeply groove while rotating. It can cut gypsum board into strips up to 120mm wide.

EDMA is a manufacturer specializing in hand tools, founded in France in 1937. With years of experience honed in the French construction industry, EDMA tools embody unique craftsmanship and reliability. These tools are now beginning to make their mark on job sites in Japan. The EDMA plasterboard tool, the Placo Roll 120, is a plasterboard stripper capable of processing 10mm, 13mm, and 18mm plasterboard. Its wooden handle allows for more precise work.

• Work tools

[Demo machine available] Three flat working positions. Two interchangeable files (flat/round) can be selected. A variety of Vario Wraps.

EDMA is a manufacturer specializing in hand tools, founded in France in 1937. With years of experience and uniqueness honed in the French construction industry, EDMA tools are beginning to make their mark in Japanese workplaces, responding to the demands of reliable on-site work. The EDMA gypsum board tools, hand tools, and the Variolap shaping file are efficient and high-performance files for shaping gypsum boards and wood.

• stone
• Work tools

[Demo machine compatible] 150mm blade capable of drilling and cutting freely.

EDMA is a manufacturer specializing in hand tools, founded in France in 1937. With years of experience and uniqueness honed in the French construction industry, EDMA tools are now beginning to make their mark in Japanese job sites, responding to the needs of reliable on-site work. The EDMA gypsum board tool, the Kolokoplack 150, is a lightweight saw that can cut and drill gypsum board. Opening processing is also easy.

• stone
• Work tools

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

The signing methods for electronic contracts (party type and witness type) are directly linked to the strength of their legal effectiveness. In this article, we will outline the reasons why the more stringent "party type" has been difficult to popularize until now. ---【Conclusion of this article】-------------------------------- • There are two signing methods for electronic contracts: "witness type" and "party type," which differ in the strictness of identity verification. • The main reasons why the party type has not spread are the three factors of "effort, cost, and the structural risk of entrusting a private key." • However, with the spread of public personal authentication (JPKI) using My Number cards, these three barriers are beginning to crumble. -------------------------------------------------------- The full text of the article can be accessed from the "Related Links."

Seven Corporation has started offering the "SeveNavi AI Cleaning Diagnosis Service," which supports the organization and improvement of cleaning challenges in manufacturing environments. Organizing cleaning challenges with AI and visualizing the next steps In manufacturing cleaning, various factors need to be considered, including the material of the object, type of dirt, adhesion state, currently used cleaning agents, working time, safety, and equipment conditions. On the other hand, there are also several challenges faced on-site, such as: - Unable to determine if the current cleaning method is appropriate - Wanting to reduce cleaning time and labor - Concerns about the safety of cleaning agents and their impact on materials - Wanting to compare with another cleaning method but unable to set test conditions - Not being able to utilize past cases and knowledge for improvement activities SeveNavi organizes information such as the object, dirt, current cleaning methods, and site photos using AI, clearly presenting the applicability of cleaning methods, points of caution, missing information, and how to proceed with comparative testing. If you have any challenges regarding reviewing current cleaning methods, comparing new cleaning methods, or reducing cleaning time and labor, please feel free to consult with us.

An online seminar will be held for design, purchasing, and DX promotion personnel considering the introduction or switch to new CAD systems, featuring the DWG-compatible 2D CAD "ARES." Participants can review content directly related to business improvement, including a comparison of features and performance with AutoCAD, automation using the CAD-specific AI "A3," automatic generation of DWG drawings from BIM data, and new ways of working in the cloud. ■ Date and Time: September 17, 2026 (Thursday) 13:30 - 15:00 ■ Format: Online (with archive viewing available) ■ Participation Fee: Free ■ Recommended for: - Those considering switching from AutoCAD - Those interested in AI utilization and automation in CAD operations - Those looking to streamline collaboration with BIM - Those seeking an environment where drawings can be edited regardless of location As a viewing benefit, a free "ARES Trinity Utilization Manual" (worth 6,000 yen) will be provided. Additionally, if you apply through the URL in the related links, our company, Keynos Logic, will consistently support you from post-seminar implementation considerations to estimates and support after operation begins. If you are interested in ARES, feel free to start by participating in this seminar.

On August 28, 2026 (Friday), I participated in the "AMD Embedded Computing Summit Tokyo 2026" and showcased a "Gesture Demo" as a partner of AMD. The demonstration introduced a configuration that combines gesture recognition using OpenCV, status reporting with LLM, and one-axis motor control using INtime 7.2 and RSI-ECAT, enabling collaboration between AI, image processing, and real-time control on a single PC. We presented a next-generation PC-based industrial control system that integrates AI, image processing, and real-time control on one PC. <Overview of Demo Participation> https://www.mnc.co.jp/INtime/AMDxINtime/AMDEcsTokyoResults.html <Actual Demo Video> https://youtu.be/JmZke75_y0s <AMD CPU + INtime RTOS Introduction Page> https://www.mnc.co.jp/INtime/AMDxINtime/amdxintime.html #PC #RealTimeOS #IndustrialPC #AI