The 2026 winter catalog has been released.

Adjustable from size M to XXL. A thin inner vest with built-in heater that keeps you warm even in winter.

This is a heated vest with five built-in heaters. It warms up in 10 seconds and can operate for 5 to 8 hours with a 10,000mAh battery. The size can be adjusted in four stages using the side zipper. The degree of closeness significantly affects warmth, allowing it to fit snugly on various body types and effectively warm the body. Made with water-repellent ripstop fabric, it is tougher and resistant to dirt, rain, and tearing. 【Features】 ■ Powerful heating with five heaters ■ Adjustable temperature ■ Powered by a USB mobile battery ■ Washable and hygienic *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

Heater gloves with built-in heating that warm up thoroughly to the fingertips, without cables.

"Denki Tepokka" is a USB-powered heated glove with anti-slip features. It has three levels of warmth that can be adjusted to your preferred temperature. The drawstring cord blocks out the cold. Two mobile batteries are included. Additionally, the size is 22 cm in hand length and 23 cm in hand circumference, with a wrist circumference of 20 to 24 cm. The weight of the main unit is approximately 190 g combined for both hands. 【Features】 ■ Touch panel compatible ■ Anti-slip design ■ Drawstring cord to block out the cold ■ Built-in 5000mAh battery, can be used without cables ■ Three levels of warmth, adjustable to your preferred temperature *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

Ultra-thin heated socks that warm the tops of your feet and can be worn over regular socks without bulk.

If you wear them over your socks, the heater on the top of your foot will keep your feet warm. These are ultra-thin, high-sock type heated socks that won't feel bulky even when layered. The inside of the shoes stays warm, and the sole area has a mesh structure that prevents moisture buildup. They are machine washable. These warm items are very useful for outdoor security and work in winter, as well as in warehouses or water-related tasks without heating.

• others

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

We will be exhibiting at the "Osaka Industry Exhibition 2026" held at MyDome Osaka from October 14 (Wednesday) to 15 (Thursday), 2026. We will introduce our stress check, health management system, reservation and reception system, and interview system.

We have published the latest issue (Issue 94) of the ISO-related information magazine "Intertek News." Intertek News delivers information and various topics related to ISO audits, certifications, and verifications. The feature of this issue is titled "Understanding Standard Revisions," where we introduce key points of management system standard requirements that new personnel should first understand in preparation for standard revisions. Additionally, we have included customer case studies, contributions from auditors, and information on certifications and standards, as well as the latest topics, so please take a look.

In recent years, while the size of residential spaces has been shrinking, there has been a growing demand from architects and designers for designs that "reduce lines as much as possible." However, designing spaces to appear clean and spacious by making door heights reach the ceiling or by minimizing the visibility of frames has posed challenges that require high skill levels from carpenters and significant construction time when attempted with conventional on-site construction methods. Against this backdrop, this year's Dretas has developed doors and storage fixtures that do not reveal frames, with the concept of "creating a noise-free space with empty space." ■ Base Frame (Fixtures) The structure hides the frame within the wall, achieving a refined design without the frame being visible from either side. It features a specially designed frame and concealed hinges that allow for 180-degree opening and closing. Frame widths (132mm, 147mm, 183mm) are set to accommodate wall thickness, eliminating the need for frame processing and supporting smooth installation. ■ Outset Frame (Storage Fixtures) The structure has the frame attached to the inside of the door, allowing the door and wall to fit flatly together. It can be configured for two or three panels, seamlessly blending even large wall storage into the space as if it were "just a wall." By using additional elements like the 3mm thick "Baseboard S-type," the installation becomes even more beautiful, enhancing the noise-free space.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who want to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. Depending on the application and installation location, you can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520." 【Recommended for such places!】 ☑ Entrance facing a busy passageway ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passageways ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing to minimize power consumption, contributing to energy-saving effects ● Equipped with a light touch function, allowing the door to open and close simply by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.