We will be exhibiting at the 【JAPAN BUILD TOKYO 2026 - Advanced Technology Exhibition for Architecture, Civil Engineering, and Real Estate -】!

It is a resin-based formwork system reinforced with fiberglass! <NETIS registration number: KT-230004-A>

Realization of weight reduction through the integration of end materials. Achieving an increase in the number of reuse cycles, this is an environmentally friendly lightweight formwork that is flexible on the construction site! 【DUO Product Features】 ■ New system formwork made of resin ■ High strength and lightweight ■ Fewer components, easy to handle ■ 100% recyclable ＜Simple Assembly Method＞ ・Anyone can easily install it ・No electric tools required ・Vertical and horizontal pipes are not necessary (depending on the construction situation) → Reduces labor costs! ＜Lightweight Resin Formwork＞ ・Easy to carry ・No processing work on site → High workability and shortened construction period! ＜Durable Resin Panels＞ ・Reuse cycles for face panels: 80 to 100 times (Replacement of face panels is possible.) ・Easy to clean → Reduces material costs and waste! ＜NETIS Registration Number: KT-230004-A＞ https://www.netis.mlit.go.jp/netis/

• Concrete construction

Optimizing the concrete pouring process at construction sites to contribute to time reduction and cost savings! <NETIS Registration Number: CB-230029-A>

PERI has launched a digital solution that optimizes the concrete pouring process at construction sites, contributing to time savings and cost reductions. "PERI ISC" (PERI InSite Construction) is a concrete sensor product for construction. This product consists of measuring devices (a main hub and child nodes), sensors, and a web cloud service that handles the collected data. The installable sensors include temperature sensors, pressure sensors (for lateral pressure measurement), and filling/compaction detection sensors. (In the future, a water-cement ratio sensor may also be available.) By optimizing the pouring work and the operating time of the formwork based on the information collected from various sensors installed within the concrete formwork, it is possible to carry out the demolding process earlier and reduce the amount of necessary formwork materials, leading to labor savings and time and cost reductions at construction sites. Additionally, the web cloud service allows for monitoring and analyzing data without being constrained by time or location. The web-based tools can be accessed from various devices.

• Ready-mix concrete

Easy lock-type (wedge-type) support system! Assembly is simple and safe. Furthermore, it also improves work efficiency on site.

"PERI UP/Rosette" is an easy-lock (wedge-type) support system. Assembly is simple and safe, and it also improves work efficiency on site. The main components are made up of modules, demonstrating high adaptability. The posts and horizontal members can be easily and quickly connected using a one-touch automatic locking device (Gravity Lock: patented technology in Germany!). Once the wedge is inserted into the joint, it can be securely locked with a hammer, ensuring it won't come loose. [You can view a reference video about Gravity Lock.] Applications include work stages, table forms, stair towers, and various other uses. [Features] - Easy and safe assembly - Improved work efficiency on site - High adaptability *For more details, please refer to the PDF document or feel free to contact us.

• Temporary Construction

PERI UP (shoring) and ST100 (shoring) dedicated accessories!

The "Quick Lowering Adapter UJA" is an accessory that can be easily attached under the head spindle. After removing the safety fixture (locking plate) of the Quick Lowering Adapter, striking the designated area (step wedge) with a hammer will cause the top plate to drop, quickly releasing the load on the head spindle. 【Product Information】 ■ Applicable height: Rising: 66 mm, Descending: 56 mm ■ Descending distance: 10 mm ■ Allowable load capacity: 50 kN ■ Minimum spindle insertion depth: 150 mm *Please use a spindle specifically for PERI UP and ST100 (Ø 38 mm). *For more details, please feel free to contact us.

• Formwork material

On December 2 (Wednesday), 3 (Thursday), and 4 (Friday), 2026, we will be holding an event in Tokyo (Tokyo Big Sight)! We will be exhibiting at 'JAPAN BUILD TOKYO 2026 - Advanced Technology Exhibition for Architecture, Civil Engineering, and Real Estate'! JAPAN BUILD TOKYO 2026 is one of the largest exhibitions in Japan's construction industry, showcasing the latest products from the architecture, civil engineering, and real estate sectors all in one place. PERI Japan will be displaying the following products: 1. Lightweight Resin Formwork 'PERI DUO' 2. Construction Concrete Sensor 'PERI InSite' 3. PERI UP Flex Shoring 4. Quick Lowering Adapter UJA We invite you to visit our exhibition booth. Thank you very much. PERI Japan Co., Ltd.

This year, we will hold the large exhibition "Wood and Living Expo" organized by Nice! Approximately 150 domestic housing and building material manufacturers will gather to showcase the latest equipment and noteworthy new products. Additionally, many specialized seminars will be held to learn about the latest industry trends and future outlooks! It will be a two-day event filled with business tips and seeds for new proposals. We sincerely look forward to your visit. ■ Dates: October 15, 2026 (Thursday) 10:00-17:00 October 16, 2026 (Friday) 10:00-16:00 ■ Venue: Pacifico Yokohama, Hall C&D ■ Organized by: Nice Co., Ltd., Japan Wood and Housing Research Association, Japan Trustworthy Renovation Promotion Association ■ Official Website: https://woodlivingfair.jp/ ■ Pre-registration: https://www.tenjikai-uketsuke.com/form/wood-living-expo-2026/ * Pre-registration is required for attendance. When registering, please select "R&D Center" as the department in charge of Nice.

RAMPF Group Japan will be exhibiting a catalog at the Precision Engineering Society's 2026 Autumn Conference held from September 15 (Tuesday) to 17 (Thursday) at Tohoku University Kawauchi Campus. This time, we will showcase two unique products: 【EPUSELF 130JP】⇒ A unique "DIY kit." You can easily handle mineral casting without special equipment. By simply pouring it into a machine bed of a tabletop lathe or a metal frame, you can expect a significant increase in damping properties. 【EPUMENT Ultralight FLOW】⇒ Possibly the world's first "ultra-lightweight" mineral casting. Its specific gravity is only 0.7 (typically around 2.4)!! If poured into parts that need to be lightweight, it can reduce weight while significantly enhancing damping properties. We will have flyers and samples available, so please feel free to take a look and check them out. Mineral casting that is easy to implement and budget-friendly can be used for various applications, depending on your needs. Although our staff will not be permanently stationed, we will be available to answer any questions you may have, so don't hesitate to ask!

Tobii Technology will hold the "Tobii Latest Eye Tracker Experience Event," which received great acclaim in Nagoya recently, in Fukuoka as well. On November 12 (Thursday) and 13 (Friday), for two days, you can see, touch, and experience Tobii's latest eye trackers and software. Whether you have never used eye tracking before, are considering its introduction for research or business, or want to try the latest products and technologies, please feel free to join us. - What can be understood through eye tracking? - Can it be utilized in my research? - How can it be used for skill transfer and on-site improvements? - I want to try the actual equipment and software. Tobii staff will be on-site to answer any questions or consultations directly. 【Event Format】 Free entry and exit Participation is possible without a reservation (priority given to those with prior reservations during busy times) *Please bring your business card. This is a valuable opportunity to experience Tobii's eye trackers in the Kyushu area. We sincerely look forward to your visit.

We would like to invite you to the online product presentation of "4DKanKan," a tool that promotes 3D digitalization and DX of sites and facilities. With a 3D digital twin camera that can simultaneously capture ultra-high-definition 16K panoramic photos and 1cm mesh point cloud data, you can advance the digitalization of your site without any specialized knowledge. 【Free】4DKanKan Online Product Presentation Presentation Content: 1. What is 4DKanKan? 2. Introduction of features using captured data 3. Introduction of optional services (hardware and software) 4. Use cases 5. Pricing and implementation methods 6. Q&A Do you have any of these concerns? - The burden of travel for site inspections is high - It is difficult to share the situation with just photos - You are interested in utilizing point clouds and 3D data but do not know how to implement them "4DKanKan" is here to solve these issues. It is being utilized to improve efficiency across a wide range of industries, including construction management, surveying, manufacturing, infrastructure, and events. Small starts are also possible through rentals, proof-of-concept experiments, and photography contracts. If you are considering DX initiatives for the next fiscal year, please join us.