We will be exhibiting at TECHNO FRONTIER 2026, the 41st Power System Exhibition at Tokyo Big Sight!

A transformer that achieves space-saving, lightweight, and high efficiency! Comparison data is also included! (Compared to our company).

This catalog introduces the wound core transformer "NCW Transformer." Our product is manufactured based on the concept of winding a core around a coil bobbin. It is a transformer that achieves space-saving, lightweight, and high efficiency. Additionally, we have included data comparing the EI type (1kVA) and NCW1000 (1kVA) based on our company's standards. [Contents] ■ Features of the NCW Transformer ■ Comparison of EI type (1kVA) and NCW1000 (1kVA) (based on our company) - Space-saving section - Lightweight section - High efficiency section *For more details, please refer to the PDF document or feel free to contact us.

• others

We want to use high-efficiency transformers" and "We want to use energy-saving type transformers.

We would like to introduce the features of the "High Efficiency Edition" of the "NCW Transformer," created based on the concept of winding an iron core onto a coil bobbin. It uses excellent core materials, resulting in minimal losses, and features a no-cut wound iron core structure. As a result, it can significantly reduce standby power consumption. A comparison of the running costs between the EI type (1kVA) and NCW1000 (1kVA) shows an economic effect of an average monthly electricity cost of ¥41,500, which translates to a cost reduction of ¥2,490,000 over five years (compared to our company). [Features] ■ Uses excellent core materials with minimal losses ■ No-cut wound iron core structure → Significantly reduces standby power *For more details, please refer to the PDF document or feel free to contact us.

• others

We want to install a transformer in a small space" and "We want to install a low-profile transformer.

We would like to introduce the "Space-Saving Edition" of the "NCW Transformer," created based on the concept of winding an iron core onto a coil bobbin. This product features a unique coil bobbin and a wound iron core structure, achieving approximately half the storage space. When comparing the EI type (1kVA) and NCW1000 (1kVA), the vertical type resulted in a width reduction of 101mm, while the horizontal type showed a height reduction of 114mm (compared to our products). 【Features】 ■ Uses a unique coil bobbin ■ Realizes a wound iron core structure → Achieves approximately half the storage space *For more details, please refer to the PDF document or feel free to contact us.

• others

"We want to reduce the total weight of the device" and "We don't want to carry heavy transformers!" We will respond to these requests!

We would like to introduce the "Lightweight Edition" of the "NCW Transformer," which was created based on the concept of winding a core with a coil bobbin. This product makes the most efficient use of excellent core materials, significantly reducing the weight of the device and greatly improving work efficiency. When compared to the EI type (1kVA) at 16.0kg, the NCW1000 (1kVA) weighs only 8.3kg, resulting in a difference of -7.7kg (compared to our products). 【Features】 ■ Maximizes the use of excellent core materials without waste → Significantly reduces the weight of the device → Greatly improves work efficiency *For more details, please refer to the PDF document or feel free to contact us.

• others

No joints, minimal leakage flux! A structure where the primary winding, secondary winding, and core are separately insulated!

The "NCW Transformer" is a wound iron core transformer designed based on the concept of winding an iron core around a coil bobbin, achieving space-saving, lightweight, and high efficiency. The structure features winding on a "U" shaped coil bobbin, with strip-shaped silicon steel plates wrapped around both ends of the coil bobbin. It allows for efficient iron core winding operations and enables winding work using an automatic winding machine. 【Features】 ■ Efficiency in iron core winding operations ■ Winding work possible with an automatic winding machine ■ Complete separation of primary and secondary windings ■ Use of oriented silicon steel plates ■ Full utilization of iron core performance due to no cuts ■ No joints, resulting in minimal leakage flux *For more details, please refer to the PDF document or feel free to contact us.

• others

Harmonic mitigation products, including options in cases, are available! They are used in solar power and wind power generation!

This product is a "copper strip wound reactor (for high current)" that achieves miniaturization by using copper strips (copper plates) to accommodate high currents. There are 2-leg, 3-leg, and 5-leg types available, and it is also possible to provide products for harmonic countermeasures. The insulation type is compatible with H type (180°C). Our company consistently handles everything from the design to the manufacturing and sales of reactors in Japan, tailored to our customers' specifications. 【Features】 ■ Achieves miniaturization by using copper strips (copper plates) to accommodate high currents ■ Available in 2-leg, 3-leg, and 5-leg types, with options for harmonic countermeasures ■ Insulation type: compatible with H type (180°C) ■ Complies with RoHS standards ■ Case options are also available *For more details, please refer to the PDF document or feel free to contact us.

• others

Compact and lightweight design is achievable! We are also considering high-frequency power transformers!

"Cut Core Transformer" can achieve miniaturization and weight reduction compared to punch-type core types. It also has excellent magnetic properties, allowing for low loss in high-frequency devices through the use of materials like super core. We encourage consideration not only for commercial power transformers but also for high-frequency power transformers. 【Features】 ■ Achieves miniaturization and weight reduction ■ Excellent magnetic properties ■ Enables low loss in high-frequency devices *For more details, please refer to the PDF document or feel free to contact us.

• others

Years of accumulated technology and know-how! We can also accommodate requests for casters and floor levelers!

Our company manufactures large transformers and reactors using various high-frequency materials and silicon steel sheets. We can also accommodate requests for cases, casters, and floor levelers. Leveraging the technology and know-how accumulated over many years, we take full responsibility for design, manufacturing, and inspection in-house. Please feel free to contact us when you need our services. 【Product Lineup】 ■ Large high-frequency transformers/reactors (swf=10–50kHz) ■ Large commercial transformers (f=50/60Hz) ■ Large reactors (f=50/60Hz to about 40Hz) *For more details, please refer to the PDF materials or feel free to contact us.

• others

We respond to a wide range of needs from OA machines to electronic devices and power equipment! We realize new dreams.

Our company designs, manufactures, and sells transformers and reactors. Under a thorough quality control system, we produce reliable products. We respond to our customers' needs with a rich lineup of electrical materials. We contribute to the stable supply of electricity necessary for daily life and propose a more comfortable living environment. 【Business Activities】 ■ Manufacturing and sales of transformers for industrial equipment, communication equipment, and medical devices ■ Sales and maintenance of floor heating systems ■ Sales of equipment and electrical materials for distribution boards and switchboards ■ Solar power sales business *For more details, please refer to the PDF document or feel free to contact us.

• others

Introduction of energy-saving, lightweight, high-efficiency transformers.

This product is a transformer designed based on the concept of "winding a core around a coil bobbin," achieving space-saving, lightweight, and high efficiency. By making the most of excellent core materials without waste, the weight of the device has been significantly reduced, and work efficiency has greatly improved. Furthermore, due to its no-cut wound core structure, standby power can be significantly reduced. 【Features】 ■ Energy-saving ■ Compact ■ Lightweight ■ Thin ■ High performance *For more details, please refer to the PDF document or feel free to contact us.

• Manufacturing Equipment
• Power and Energy Equipment

Introduction of energy-saving, lightweight, high-efficiency transformers.

This product is a transformer designed based on the concept of "winding a core around a coil bobbin," achieving space-saving, lightweight, and high efficiency. By making the most of excellent core materials without waste, the weight of the device has been significantly reduced, and work efficiency has greatly improved. Furthermore, due to its no-cut wound core structure, standby power can be significantly reduced. 【Features】 ■ Energy-saving ■ Compact ■ Lightweight ■ Thin ■ High performance *For more details, please refer to the PDF document or feel free to contact us.

• Power and Energy Equipment

The shape can be discussed separately! We introduce the manufacturing range of single-phase transformers, three-phase transformers, and reactors.

At Nichiko Electric Co., Ltd., we accept custom orders for transformers. For single-phase transformers, three-phase transformers, and reactors, the shapes can be discussed separately. High-current reactors can be accommodated with copper bar winding. We can also provide solutions for harmonic issues. Please feel free to contact us when you need assistance. 【Production Range】 ■ Single-phase transformers: up to 150kVA (50/60Hz) ■ Three-phase transformers: up to 200kVA (50/60Hz) ■ Reactors: equivalent to up to 50kVA *For more details, please refer to the PDF materials or feel free to contact us.

• Power and Energy Equipment

I want to install a transformer in a small space! Achieving space-saving, lightweight, and high efficiency.

★☆Since April 1, 2022, our headquarters and factory have adopted 100% renewable energy electricity. Nikko Electric's products are powered by 【CO2-free electricity】★☆ The 'NCW Transformer' features a coil wound around a "lo" shaped coil bobbin, with strip-shaped silicon steel plates wrapped around both ends of the coil bobbin, making it a wound iron core transformer. By efficiently utilizing excellent core materials, we expect a significant reduction in equipment weight and a substantial increase in work efficiency. Furthermore, since the primary and secondary coils are completely independent, we have achieved high insulation performance. *For more details, please refer to the PDF document or feel free to contact us. ★☆★☆Regarding inquiries from customers not registered with Ipros★☆★☆ For inquiries from unregistered users, please use the related link below: 【Nikko Electric Co., Ltd. Inquiry Form (For inquiries from those not registered with Ipros, please contact us here)】 ☆★☆★↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓☆★↓↓↓↓↓↓↓↓☆★ ☆★☆★↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓☆★↓↓↓↓↓↓↓↓☆★

• others

Transformer reactor using ferrite core

From April 1, 2022, our headquarters and factory have adopted 100% renewable energy electricity. Nikkou Electric's products are powered by CO2-free electricity. High-frequency transformers and reactors (EI type, ER type, PQ type) - These transformers use ferrite cores and are mainly used in switching power supplies. - Insulation types: We can accommodate type A to type B. - RoHS compliant. *In addition to the above, we also have a track record of large products such as UU type and UI type. Regarding inquiries from customers not registered with Ipros: For inquiries from those not registered with Ipros, please contact us through the related link below: [Nikkou Electric Co., Ltd. Inquiry Form (Please contact us here if you are not registered with Ipros)] ☆★☆★↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓☆★↓↓↓↓↓↓↓↓☆★ ☆★☆★↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓☆★↓↓↓↓↓↓↓↓☆★ ☆★☆★↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓☆★↓↓↓↓↓↓↓↓☆★

• others

Custom-made low-frequency transformers (voltage transformers) and reactors (stacked core type and cut core type) tailored to customer use.

Low Frequency Transformer / Reactor (Stacked Core Type / Cut Core Type) ★☆★☆★☆Since April 1, 2022, our headquarters and factory have adopted 100% renewable energy electricity. Nikko Electric's products are powered by [power transformers generated from CO2-free electricity]★☆★☆★☆ ★☆★☆Regarding inquiries from customers not registered with Ipros★☆★☆ For inquiries from those not registered with Ipros, please use the related link below: [Contact Form for Nikko Electric Co., Ltd. (Please contact us here if you are not registered with Ipros)] ☆★☆★↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓☆★↓↓↓↓↓↓↓↓☆★ ☆★☆★↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓☆★↓↓↓↓↓↓↓↓☆★ ☆★☆★↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓☆★↓↓↓↓↓↓↓↓☆★

• others

Large transformers and reactors tailored to customer specifications. They are widely used in renewable energy generation such as solar power and wind power.

■Production Range Single-phase Transformer: Up to 150kVA (50/60 Hz) Three-phase Transformer: Up to 200kVA (50/60 Hz) Reactor: Equivalent to up to 50kVA *1 Shape: Can be discussed separately *2 High current reactor (300A–1500A) Copper bar winding available (maximum 2P 0.5t–1.2t-300w) *3 Harmonic countermeasures are also available ◎High Current Transformers [Features] - Uses stack coils, supporting up to 3000A - Insulation type: H type compatible - RoHS compliant ◎Reactors [Features] - Copper bar winding for high frequency compatibility, achieving miniaturization - Available in 2-legged, 3-legged, and 5-legged types - Insulation type: H type compatible - RoHS compliant *In addition to the above, we also offer dry reactors, AC reactors, and DC reactors, single-phase up to 50kVA, three-phase up to 200kVA, and enclosed types. Please feel free to consult with us. If you are not registered with Ipros, please contact us through the related links below. ↓↓↓↓↓↓↓↓↓↓↓↓ Click here ↓↓↓↓↓↓↓↓↓↓↓

• others

Custom-made cut-core transformers tailored to customer specifications. Their compact and lightweight design improves workability and efficiency during implementation.

As of April 1, 2022, our headquarters and factory have adopted 100% renewable energy electricity. The products of Nikkou Electric are powered by CO2-free electricity. ■ Production Range Single-phase Type Core Size: CS6.3 to CS2500 : SL1700 to SL7500, etc. Three-phase Type Core Size: SE201 to SE215, etc. Compared to conventional punched types, miniaturization and weight reduction are achievable. The magnetic properties are also excellent, and by using materials like super cores, low loss in high-frequency devices can be achieved. Consideration can be given not only to commercial power transformers but also to high-frequency power transformers. ★☆ Inquiries from customers not registered with Ipros ☆★ For inquiries from those not registered with Ipros, please use the related link below. 【Nikkou Electric Co., Ltd. Inquiry Form (For inquiries from those not registered with Ipros, please contact us here)】 Please reach out through there.

• others

Can be installed in a narrow space! Achieves space-saving, lightweight, and high efficiency.

The "NCW Transformer" is a wound iron core transformer with a coil wound on a "ro" shaped coil bobbin, and strip-shaped silicon steel sheets wrapped around both ends of the coil bobbin. By effectively utilizing excellent core materials, significant weight reduction of the device and a substantial increase in work efficiency are expected. Furthermore, since the primary and secondary coils are completely independent, high insulation performance has been achieved. In the downloadable materials, we have prepared three documents using specific figures: NCW Transformer High Efficiency Edition, Space-Saving Edition, and Lightweight Edition. *For more details, please refer to the PDF materials or feel free to contact us. For inquiries from those not registered with Ipros, please use the related link below. [Contact Form for Nikkou Electric Co., Ltd. (For those not registered with Ipros, please contact us here)] Please reach out to us. ☆★☆★↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓☆★↓↓↓↓↓↓↓↓☆★ ☆★☆★↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓☆★↓↓↓↓↓↓↓↓☆★ ☆★☆★↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓☆★↓↓↓↓↓↓↓↓☆★

• others

Exhibiting at the "New Manufacturing and New Services Exhibition for Small and Medium Enterprises"! NCW3000 (3000VA) is also under development! Can be installed in tight spaces.

During the exhibition period, we will showcase several types of transformers categorized by capacity. Compared to EI-type transformers of the same capacity, NCW transformers excel in "space-saving," "lightweight," and "high efficiency," making it possible to install lightweight transformers in narrow spaces, thereby reducing the burden on workers. Additionally, as a high-efficiency type transformer, it significantly reduces standby power consumption, contributing to carbon neutrality efforts. We sincerely hope you will visit our booth. Date: December 14 (Wednesday) to 16 (Friday), 2022 Location: Tokyo Big Sight, East Hall 7 Booth Number: F-45 ★☆★☆ For inquiries from customers not registered with Ipros ★☆★☆ For inquiries from those not registered with Ipros, please use the related link below: [Inquiry Form for Nikkoh Electric Co., Ltd. (Please contact us here if you are not registered with Ipros)] ☆★☆★↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓☆★↓↓↓↓↓↓↓↓☆★ ☆★☆★↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓☆★↓↓↓↓↓↓↓↓☆★

• others

Low leakage, space-saving! Custom manufacturing is possible according to design specifications such as any number of turns and current values.

This product is a high-end transformer that boasts excellent efficiency and voltage fluctuation rates, featuring low leakage and space-saving design. It can be used in broadcasting equipment, measuring instruments, medical devices, audio equipment, etc. It utilizes a toroidal core and can be manufactured according to design specifications such as arbitrary winding numbers, inductance, and current values. Additionally, by adding short rings and shields, leakage flux can be minimized to the greatest extent. 【Compatible Sizes】 ■ Manual winding core size (approximate) - Outer diameter: 70mm Max / Inner diameter: 15mm Min / Height: 15mm Max ■ Automatic winding core size (approximate) - Outer diameter: 200mm Max / Inner diameter: 35mm Min / Height: 120mm Max *For more details, please refer to the PDF document or feel free to contact us.

• others

We have prepared a wide variety of shapes to accommodate various designs! Introducing switching transformers.

This product is a switching power supply transformer that can widely accommodate various devices, from home appliances to industrial applications. The frequency ranges from 10kHz and we offer a wide variety of shapes to support various designs. Our company consistently handles everything from the design to the manufacturing and sales of transformers, coils, and reactors in Japan, so please feel free to contact us when you need assistance. 【Supported Sizes】 ■ EI Core Type: EI12.5 to EI60 ■ ER Core Type: ER25.5 to ER42A (Vertical) / ER28 to ER49L (Horizontal) ■ PQ Core Type: PQ2016 to PQ5050 ■ EPC Core Type: PC13 to PC30 ■ EP Core Type: EP10, EP13 ■ Large Type: ER90 to ER120 *For more details, please refer to the PDF materials or feel free to contact us.

• others

Towards the realization of a decarbonized society! Introducing low-cost, high-insulation transformers.

This product is a transformer designed based on the concept of "winding a core around a coil bobbin," achieving space-saving, lightweight, and high efficiency. By making the most efficient use of excellent core materials without waste, the weight of the device has been significantly reduced, and work efficiency has greatly improved. Furthermore, due to its no-cut wound core structure, standby power can be significantly reduced. 【Features】 ■ Energy-saving ■ Compact ■ Lightweight ■ Thin ■ High performance *For more details, please refer to the PDF document or feel free to contact us.

• others

Custom design tailored to your needs! Can be used as a power supply for a wide range of applications.

This product is a transformer designed for commercial frequency (50/60Hz) using silicon steel sheets. It can be manufactured in sizes up to EI240 and capacities of around 5kVA. It is used as a power supply for a wide range of applications including industrial equipment, medical devices, office automation equipment, factory automation equipment, power distribution equipment, and consumer electronics (audio), among others. We respond individually to compliance standards such as JIS, JEM, JEC, and other overseas standards, and we design according to your requests regarding temperature rise limits, inrush current limits, various connection methods, and case adaptations, so please feel free to contact us. 【Manufacturing Range】 ■ Size: Up to EI240 ■ Capacity: Approximately up to 5kVA ■ Insulation Types: Class A, E, B, F, H ■ Operating Voltage: For low voltage circuits (100V, 200V, 400V, etc.) *For more details, please refer to the PDF document or feel free to contact us.

• others

Maximize core performance with no cuts! Introducing a low-cost, high-insulation transformer.

This product is a transformer designed based on the concept of "winding an iron core onto a coil bobbin," achieving space-saving, lightweight, and high efficiency. By making the most of excellent iron core materials without waste, the weight of the device has been significantly reduced, and work efficiency has greatly improved. Furthermore, due to its no-cut wound iron core structure, standby power can be significantly reduced. 【Features】 ■ Low cost ■ High insulation ■ Space-saving ■ Lightweight ■ High efficiency *For more details, please refer to the PDF document or feel free to contact us.

• others

Significantly contributes to energy conservation! Published the dimension table for the coil bobbin type iron core transformer "NCW Transformer"!

This document includes the dimensional drawings and weights of NCW transformers (vertical type). Our company designs a variety of transformers, coils, and reactors, ranging from single-phase and three-phase small units to large ones (200 kVA class), based on our extensive track record and experience. We have various winding machines, including automatic winding machines, manual winding machines, large winding machines, multi-tap winding machines, and toroidal winding machines, enabling us to produce a wide range of transformers and coils. We specialize in custom specifications, so please feel free to consult us. [Contents (partial)] ■ Capacity (VA) ■ Width (W) ■ Depth (L) ■ Height (H) ■ Approximate weight (Kg) *For more details, please refer to the PDF document or feel free to contact us.

• others

Compact, lightweight, slim, and high-efficiency! A dimension table for the coil bobbin type iron core transformer "NCW Transformer" is now available!

This document includes the dimensional drawings and weights of NCW transformers (horizontal type). Our company designs a variety of transformers, coils, and reactors ranging from single-phase and three-phase models to large ones (200 kVA class), based on our extensive track record and experience. We have various winding machines, including automatic winding machines, manual winding machines, large winding machines, multi-strand winding machines, and toroidal winding machines, allowing us to manufacture a wide range of transformers and coils. We specialize in custom specifications, so please feel free to consult with us. 【Contents (partial)】 ■ Capacity (VA) ■ Width (W/W') ■ Depth (L) ■ Height (H) ■ Approximate weight (Kg) *For more details, please refer to the PDF document or feel free to contact us.

• others

PERI products are used at construction sites around the world. This time, we would like to introduce the construction work of the "Dunajec Road Bridge" spanning the Dunajec River in the town of Nowy Targ in southern Poland. The road bridge was planned to be constructed using a balanced cantilever method, dividing the cantilever beams starting from each pier into 10 segments. A particular concern was to strictly adhere to the concrete pouring cycle for each segment. To achieve this, a balanced cantilever carriage (VBC) equipped with a hydraulic advance system and an automatic formwork stripping function was adopted. By utilizing the VBC, it became possible to pour concrete for segments up to a maximum length of 5 meters in a single cycle, allowing for efficient and timely construction. PERI products: 1. TRIO Panel Formwork 2. VARIO GT24 Wall Formwork 3. PERI UP Flex Modular Scaffold 4. VST Heavy-Duty Shoring Tower PERI Japan Co., Ltd.

At a major purchasing specialty store located in Kanagawa Prefecture, we have introduced our commercial aroma diffuser rental service "MajestaFragrance," enhancing the store's atmosphere with fragrance. Installed models: MFmini (4,400 yen per month) × 2 units Adopted fragrance: Freesia Pear To ensure that customers visiting the store can relax during their appraisal and consultation time, we have implemented space branding with a "refined and approachable scent." The fragrance used is "Freesia Pear," which pleasantly spreads the freshness of fruity pear and the vibrant aroma of freesia. It warmly welcomes customers with a clean and high-quality scent. The "MFmini" introduced this time is a compact yet powerful diffuser known for its strong diffusion capabilities. It blends smartly into limited installation spaces such as reception counters and customer service areas, efficiently delivering fragrance. At Majesta Fragrance, we offer optimal diffuser models and fragrance suggestions tailored to the size of the store, type of business, and interior atmosphere. A "free trial installation" is also available before signing a contract.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

We will be exhibiting at the "Osaka Industry Exhibition 2026" held at MyDome Osaka from October 14 (Wednesday) to 15 (Thursday), 2026. We will introduce our stress check, health management system, reservation and reception system, and interview system.

We have published the latest issue (Issue 94) of the ISO-related information magazine "Intertek News." Intertek News delivers information and various topics related to ISO audits, certifications, and verifications. The feature of this issue is titled "Understanding Standard Revisions," where we introduce key points of management system standard requirements that new personnel should first understand in preparation for standard revisions. Additionally, we have included customer case studies, contributions from auditors, and information on certifications and standards, as well as the latest topics, so please take a look.