We will be exhibiting at the "8th International Construction and Surveying Expo (CSPI-EXPO)" from June 17 (Wednesday) to June 20 (Saturday), 2026.

Depth, slope, and distance are all at your command! No cables or welding required for easy installation on your existing hydraulic excavator! A machine guidance system that overturns conventional wisdom.

iDig is a 2D machine guidance system for hydraulic excavators that requires no cables or welding, making it easy to install. You can freely control depth, slope, and distance, with bucket edge accuracy of ±1cm! It overturns the conventional wisdom of machine guidance. By simply moving the excavator according to the LED display, efficient and precise digging is possible. All tasks can be completed by one person, contributing to cost reduction. Additionally, you can know the excavation height without getting out of the driver's seat, significantly reducing the physical burden of getting in and out. Wireless communication between sensors eliminates time loss due to disconnections. 【Features】 ■ High precision of ±1cm ■ Compatible with small to large excavators ■ Installation and setup completed in about 1 hour ■ Usable regardless of operator skill level ■ Rental options available (please inquire) 【We will exhibit at the 5th Construction and Surveying Productivity Improvement Exhibition】 Dates: May 24 (Wed) - May 26 (Fri), 2023 (10:00 AM - 5:00 PM / 4:00 PM on the last day) Venue: Makuhari Messe *You can view the catalog from the [Download] section.

• others

With the ease of 2D, towards the future of 3D.

The new 2D model "iDig Connect2D" has arrived in the retrofittable backhoe machine guidance "iDig" series! Maintaining the advantages of the previous model "iDig Touch2D," such as "no wiring required," "solar charging," and "easy to switch," this is an "expandable 2D system" that is also prepared for future 3D construction. 【Features】 1. "Scalable 2D" - 3D upgradeable By simply adding a GNSS antenna and other components, it can be upgraded to 3D. This allows for a phased investment approach of "first introducing 2D → upgrading to 3D as needed." 2. Compatible with swing boom and tilt rotator Strong in narrow spaces and complex slope construction, making it ideal for urban job sites. 3. Dynamic laser catch function The response speed of laser reception has dramatically improved. Smooth continuous construction can be achieved without stopping work! This model is perfect for companies that want to improve current construction efficiency while also looking to the future.

• others

Easy operation with just one operator! Streamlining excavation work in civil engineering.

In the civil engineering industry, precision and efficiency in excavation work are always required. Especially as labor shortages become more severe, it is important to enable accurate work even without skilled operators and to shorten construction periods. iDig navigates depth, slope, and distance in real-time, reducing the burden on operators. This contributes to a reduction in work time and costs. 【Usage Scenarios】 * Land development * Foundation work * Slope shaping * Piping work 【Benefits of Implementation】 * Reduction in work time * Cost savings * Reduction in labor costs * Prevention of rework due to reduced errors

• IT Control and Services

Excavation work with a hydraulic excavator, done with high precision by a single operator!

In the construction industry, the accuracy of excavation work greatly influences the quality and efficiency of projects. In particular, excavating to the specified depth and slope affects subsequent processes and can lead to rework and increased costs. iDig is designed to enable operators to perform excavation work accurately while keeping track of depth, slope, and distance on their own. This improves work efficiency and achieves high-precision construction. 【Usage Scenarios】 - Land development - Foundation work - Slope work - Piping work 【Benefits of Implementation】 - Improved excavation accuracy - Reduced work time - Cost savings - Reduced burden on operators

• IT Control and Services

Low-cost 3DMG for everyday use, ideal for ICT construction in small-scale projects.

The combination of iDig and Junpei-kun can be utilized for ICT construction, allowing for the seamless introduction of ICT construction machinery. Instead of immediately implementing comprehensive ICT utilization in construction, you can start by streamlining familiar tasks, retrofitting existing small construction machinery, and using it for 3D machine guidance for small to medium-scale earthworks. You can adapt it for use in small-scale ICT construction and for the regular use of each piece of equipment according to the site conditions. <Recommended Points> - Junpei-kun and iDig can be interchanged, allowing for use with multiple heavy machines. - Each piece of equipment can be used individually as needed. - On-site measurements and construction are possible with the Fast Measurement Navigation. ★ Certified under the ICT Construction Machinery Certification System Certification Number: 2022-45-2-1-1-1 Name of ICT construction machinery: iDig + Junpei-kun (3DMG retrofitting device) Certification Announcement Date: October 5, 2022

• others

Depth, slope, and distance at your command! Easy installation on your existing hydraulic excavator! *Exhibited at the 5th Construction and Surveying Productivity Improvement Exhibition!

The machine guidance system for hydraulic excavators, 'iDig Touch 2D', can be easily introduced without the need for cables or welding, allowing for precise control of depth, slope, and distance! (The bucket edge accuracy is ±1cm) It overturns the conventional wisdom of machine guidance. By simply moving the excavator according to the LED display, efficient and accurate excavation is possible, allowing all tasks to be completed by one person, contributing to cost reduction. Additionally, since the numerical values related to excavation height can be understood without getting out of the driver's seat, the physical burden of getting in and out is significantly reduced, and wireless communication between sensors eliminates time loss due to disconnections. 【Features】 ■ High precision of ±1cm ■ Compatible with small to large excavators ■ Installation and setup can be completed in about 1 hour ■ Usable regardless of the operator's skill level ■ Rental options available (please consult) 【Exhibiting at the 5th Construction and Surveying Productivity Improvement Exhibition】 Date: May 24 (Wed) - May 26 (Fri), 2023 (10 AM - 5 PM / 4 PM on the last day) Venue: Makuhari Messe Booth: (Indoor) F-61 (Outdoor) OD-01

• others

Decarbonization is currently shifting its positioning from "cost management" to "enhancing competitiveness," and we are entering an era where mere regulatory compliance is no longer sufficient. With the strengthening of sustainability labeling regulations and the EU's Carbon Border Adjustment Mechanism (CBAM), the environmental value of products has transcended corporate responsibility and become a crucial element in market competition. On the other hand, many companies are facing challenges such as: - The complexity of CFP calculation and environmental labeling requirements makes it difficult to know how to proceed. - How to balance regulatory compliance with enhancing competitiveness (differentiation). - Difficulty in prioritizing ISCC certification and CBAM compliance. In this seminar, we will invite Wastebox Co., Ltd., which has extensive consulting experience in the environmental field, to introduce ideas and specific examples on how to connect responses to decarbonization and the circular economy to business growth from both "offensive" and "defensive" perspectives. ■ Part 1: "Understanding the Environmental Value of Products from Offensive and Defensive Perspectives: How to Leverage Decarbonization and the Circular Economy for Differentiation and Regulatory Compliance" ■ Part 2: "Why Are We Entering an Era of Product Environmental Value Now? (Tentative Title)" ■ Part 3: "Introduction of Services Supporting the Reliability of Product Environmental Value"

The requirements for quality management systems in the automotive industry are becoming increasingly sophisticated year by year, and a more nuanced understanding and appropriate response are required for obtaining and maintaining IATF 16949 certification. In particular, the application of Rules 6th Edition has led to changes in the audit process and certification requirements, making it essential to understand these accurately. In this webinar, we will clearly explain the latest trends in IATF 16949 certification and the key points of Rules 6th Edition from the perspective of auditors, directly relating to practical applications.

In the food industry, as the importance of ensuring quality and safety continues to rise, there is a growing demand for understanding international food safety standards and appropriately responding to the latest requirements. In FSSC 22000 Ver. 7, aspects such as "food safety culture," "risk-based thinking," "unannounced audits," and "supplier management" have been strengthened, making corporate responses crucial. In this webinar, Mr. Hiroshi Ideta, Regional Representative for Japan and Korea at the FSSC Foundation, will explain the latest trends in domestic and international food safety standards and the trends of certified companies. Bureau Veritas will introduce the key points of the FSSC 22000 Ver. 7 revision. If you are considering how to respond to the standard revision or want to understand the latest trends, please join us. ■ Part 1: "Domestic and International Trends Surrounding Food Safety Standards and Trends of FSSC 22000 Certified Organizations" 　　　　Mr. Hiroshi Ideta, Regional Representative for Japan and Korea, FSSC Foundation ■ Part 2: "Explanation of Key Points of FSSC 22000 Ver. 7 Revision" 　　　　Bureau Veritas Japan Co., Ltd., System Certification Business Division, Technical Department 　　　　ISO/FSSC22000 Auditor, Koichi Mukai

Although spot coolers have been introduced on-site, are you struggling with issues such as "only the person in front of the spot cooler can feel cool" and "it's actually hotter due to the heat exhaust"? In this seminar, we will provide detailed information on how to effectively utilize "cool air distribution ducts" to easily resolve these challenges associated with spot coolers without incurring significant costs. ＼Especially recommended for the following individuals／ - Those considering heat stroke prevention measures for factories, warehouses, or construction sites - Those who have introduced spot coolers but feel unsatisfied with their effectiveness - Those who want to improve their work environment easily without incurring high costs

We are pleased to announce the archive distribution of our hosted web seminar titled "Easily Create Beautiful Manuals for kintone with Image Copy-Paste and Markdown Using StockNaut." We will provide a clear explanation of the kintone plugin "StockNaut," which allows you to richly describe multiple images embedded in a multi-line text field. The "Markdown syntax" adopted by StockNaut enables the creation of text that is easy for both humans and generative AI to handle. By combining it with generative AI, you can experience the benefits of StockNaut at 120%! We welcome those who are struggling with document creation, including manuals, to join us. 【Recommended for the following people】 - Those who want to create procedures, manuals, or knowledge bases on kintone. - Those who find it cumbersome to adjust formatting every time they create a manual. - Those who have heard of StockNaut but have not yet tried it. - Those who want to structure knowledge and refine writing in anticipation of future AI utilization.