We will be exhibiting at METF 2026 (the 20th Military Engineer Tech Fair)!

It is a resin-based formwork system reinforced with fiberglass! <NETIS registration number: KT-230004-A>

Realization of weight reduction through the integration of end materials. Achieving an increase in the number of reuse cycles, this is an environmentally friendly lightweight formwork that is flexible on the construction site! 【DUO Product Features】 ■ New system formwork made of resin ■ High strength and lightweight ■ Fewer components, easy to handle ■ 100% recyclable ＜Simple Assembly Method＞ ・Anyone can easily install it ・No electric tools required ・Vertical and horizontal pipes are not necessary (depending on the construction situation) → Reduces labor costs! ＜Lightweight Resin Formwork＞ ・Easy to carry ・No processing work on site → High workability and shortened construction period! ＜Durable Resin Panels＞ ・Reuse cycles for face panels: 80 to 100 times (Replacement of face panels is possible.) ・Easy to clean → Reduces material costs and waste! ＜NETIS Registration Number: KT-230004-A＞ https://www.netis.mlit.go.jp/netis/

• Concrete construction

Optimizing the concrete pouring process at construction sites to contribute to time reduction and cost savings! <NETIS Registration Number: CB-230029-A>

PERI has launched a digital solution that optimizes the concrete pouring process at construction sites, contributing to time savings and cost reductions. "PERI ISC" (PERI InSite Construction) is a concrete sensor product for construction. This product consists of measuring devices (a main hub and child nodes), sensors, and a web cloud service that handles the collected data. The installable sensors include temperature sensors, pressure sensors (for lateral pressure measurement), and filling/compaction detection sensors. (In the future, a water-cement ratio sensor may also be available.) By optimizing the pouring work and the operating time of the formwork based on the information collected from various sensors installed within the concrete formwork, it is possible to carry out the demolding process earlier and reduce the amount of necessary formwork materials, leading to labor savings and time and cost reductions at construction sites. Additionally, the web cloud service allows for monitoring and analyzing data without being constrained by time or location. The web-based tools can be accessed from various devices.

• Ready-mix concrete

Domestic softwood concrete formwork plywood

"PERI NS Cypress" is a high-quality film-faced plywood jointly developed by Perry Japan Co., Ltd. and Nisshin Co., Ltd. It uses a special film that is unprecedented and specifically designed for coniferous trees! Additionally, internal tests by the PERI Group have confirmed a reuse count of 20 times. (Please ensure that release agent application and surface scraping/cleaning are performed to extend the reuse count.) 【Product Features】 ■Reuse Count Cleared 20 reuses in our internal tests. (*Reuse count may vary depending on the handling method of the product.) ■Quality Control Program JAS certification (obtained) PEFC certification (scheduled for registration) Rigidity tests by a public third-party organization ■Price Please feel free to contact us. Joint Development Partner: Company Name: Nisshin Co., Ltd. Address: 100 Nishi Industrial Park, Sakaiminato City, Tottori Prefecture, 684-0075 TEL: 0859-47-0303 FAX: 0859-47-0313 https://www.nisshin.gr.jp/ *For more details about this product, please feel free to contact us.

• Formwork material

Exhibition of system formwork born in Germany! What is system formwork? I want to see the actual system formwork! Please feel free to contact us for more information!

At Perry Japan, we have a stockyard and product exhibition area. Ibaraki Stockyard 〒311-3155 Ibaraki Prefecture, Higashi Ibaraki District, Ibaraki Town, Shimohashi 2000-12 TEL: 029-219-0800 FAX: 029-219-0801 At Perry Japan, we conduct tours of the system formwork product exhibition hall, study sessions on system formwork, assembly experiences, and product seminars at the Ibaraki Stockyard, based on the concept of "Listen, See, Touch/Ride, Assemble" to meet our customers' needs. * What kind of company is Perry? * What is system formwork? * How is system formwork used? * I know about system formwork, but I've never used it. * I want to see the actual product before purchasing or renting! * And more. Please come and see our products at the Ibaraki Stockyard. For inquiries about tours, study sessions, or product seminars, feel free to contact us.

• Systems Architecture

Sanphase Electric Co., Ltd. will be exhibiting at the "14th SMART ENERGY WEEK - Smart Energy WEEK [Kansai]" held at Tokyo Big Sight. This exhibition is established in the industry as one of the largest in western Japan, showcasing various technologies such as solar power generation, secondary batteries, and smart grids, attracting experts from around the world. We will be presenting DC brushless canned pumps that can operate at low temperatures down to -80°C and high temperatures up to 250°C. If you are even slightly interested, please come visit our booth.

Cleo Corporation will be exhibiting at "Leisure & Sports Japan 2026," held at Tokyo Big Sight. "Leisure & Outdoor Japan 2026" is a specialized exhibition that gathers the latest products and services from the leisure and outdoor industry. It will showcase products, technologies, and solutions that contribute to the development of new facilities and improvement of services for businesses involved in the operation and development of parks, leisure facilities, theme parks, and outdoor facilities. At our booth, we will introduce products that create play spaces, focusing on water park attractions. We sincerely look forward to your visit. Please note that prior registration on the web is required for your visit. ▼ Please register in advance from here. https://leisure-japan.jp/visitors/

Are you relying on "human eyes" for counting parts? At Tokyo Pack 2026, you can see four types of counting, measuring, and packaging machines in action. - Two-way mirror spectral image processing vision counter: Resolution of 65.5 microns. Can identify overlapping tiny parts. - CCD image processing parts counter VC-200: Compatible with a variety of items such as connectors, electronic parts, rubber, and plastic products. - Mini feeder-type weighing machine: Weighs tea, coffee beans, rice, and powders. - Ultra-compact gas filling automatic packaging machine GX-402: Suitable for flat bags of 10-500g and gusset bags of 100-500g. *The exhibited machines are representative examples of standard specifications. Actual specifications will be customized individually.

Counting errors and the effort to confirm quantities of parts are hidden costs in the manufacturing process. At JIMTOF 2026, we will showcase two models of Shoraku Industry's vision counters that count parts using camera image processing and AI. The two-direction mirror spectral image processing vision counter has a resolution of 65.5 microns. By capturing images from two directions, it accurately identifies overlapping small parts such as screws, bolts, and metal components. The CCD-type image processing parts counter VC-200 model, equipped with four feeders and AI self-learning, accommodates a variety of items including connectors, electronic parts, rubber, and plastic products. *The exhibited machines are representative examples of standard specifications. Actual specifications will be customized individually.

This is a notice for the rebroadcast of the co-hosted seminar with Live Consulting Co., Ltd. held on September 11 and 15, 2026. "The New AI Tools Are No Longer Needed" This seminar allows participants to experience Microsoft Copilot, which can be used directly within familiar Word, Excel, and Teams, through a demonstration of actual operating screens. The answers are already within your existing Microsoft 365. You can use AI directly in Word, Excel, and Teams without the need for additional tool selection, all within the security framework of M365. We will explain the basics to practical applications of Copilot in 90 minutes, aimed at executives and managers in the manufacturing industry. We sincerely look forward to your participation. 【Recommended for】 - Executives and managers in the manufacturing industry who have not yet mastered generative AI/Copilot - Those considering AI implementation but are stalled due to tool selection, security, or promotion systems - Those who prefer to see "actual screens" rather than just "reading" before making a decision - Those who are concerned about security and cannot use ChatGPT in their company