Notice of specification changes and expansion of application conditions for "Hybrid Joint LL Type"

Proven durability of 50 or 100 years through fatigue load testing!

The Hybrid Joint NS-LL type and 3LIIA type have been tested under the fatigue durability test specified by NEXCO, confirming a durability of 50 years after 6 million load cycles. Furthermore, the 3LIIA type will undergo another fatigue loading test in November 2024. After 12 million load cycles, a durability of 100 years has been confirmed! This proves its ultra-long-term durability. Traditionally, expansion joints are often required to have a durability of around 30 years, but bridges are expected to last 100 years, so it is undeniable that expansion joints can shorten the lifespan of bridges. Our product, the Hybrid Joint, contributes to extending the lifespan of the expansion joint itself, thereby reducing lifecycle costs and promoting the longevity of bridges. We offer a wide range of products from small to large, accommodating expansion amounts from 20mm to 600mm. 【NS-LL Type Features】 ○ 50 years of durability and water-tightness ○ Ultra-low noise and low vibration ○ Steel vertical shape 【3LIIA Type Features】 ○ 100 years of durability ○ 50 years of water-tightness ○ Large expansion amount and wide gap For more details, please contact us or request a catalog.

• Foundation construction

The adhesion between the steel plate and rubber was confirmed to have no delamination in the tensile test!

The Hybrid Joint NS-LL type is manufactured using the press vulcanization bonding technology, which is also used in the production of bearings. Regarding the bonding part, it has been confirmed through a tensile test by the Chemical Substance Evaluation Research Organization that the failure mode was material failure rather than cohesive failure, meaning there was no delamination. This indicates that the steel plate and rubber are bonded very strongly, making it a product with excellent water-tightness. In addition to the strong adhesive force between the rubber and the steel plate, the structure is designed so that the water-stopping rubber does not come into direct contact with the tires of passing vehicles, making it less prone to wear. The range of products available includes both small and large items, accommodating expansion amounts from 20mm to 175mm and a maximum applicable slab gap of 395mm. **Features** - High water-tightness - Steel vertical tooth shape - One-lane assembly product ~~ We are currently seeking agents! Agents from the Tohoku and Hokuriku regions are very welcome! Of course, we also accommodate companies from other regions! ~~ For more details, please contact us or request a catalog.

• Foundation construction
• Dam construction

[Agents Wanted] The connection points between joints are factory vulcanized and bonded, achieving very high water resistance.

Crittec Industries Co., Ltd. has continued to develop expansion devices for bridges that are environmentally friendly and contribute to environmental protection, fulfilling its responsibilities as a comprehensive manufacturer of expansion devices for road bridges. We will continue to adhere to this policy, conducting all development, design, and manufacturing processes in-house to create products that meet our customers' needs. Additionally, Crittec Industries Co., Ltd. often takes responsibility not only for product sales but also for installation work, striving to improve products by considering issues that arise during installation and the condition of removed existing expansion devices. Our product lineup is extensive, ranging from small to large products, capable of accommodating expansion amounts from 20mm to 175mm and a maximum slab gap of 395mm. 【Features】 ○ High watertightness ○ Steel vertical tooth shape ○ One-lane assembly product ~~ We are currently seeking agents! Agents from the Tohoku and Hokuriku regions are very welcome! Of course, we also accommodate companies from other regions! ~~ For more details, please contact us or request a catalog.

• Foundation construction
• Dam construction

By installing the guide board, it prevents damage to the main body by the grader in snowy areas.

The hybrid joint is a non-drainage expansion device developed using a composite technology of rubber and steel materials, achieving very high water-tightness by press vulcanizing and bonding steel plates and rubber. Furthermore, by adopting a steel vertical shape for the load-bearing structure, the surface exposure area has been minimized, improving sound insulation and durability. The range of products available includes both small and large items, accommodating expansion amounts from 20mm to 175mm, and a maximum applicable slab gap of 395mm. 【Features】 ○ High water-tightness ○ Steel vertical tooth shape ○ One-lane assembly product ~~ Currently seeking agents; agents from the Tohoku and Hokuriku regions are very welcome! Of course, we can also accommodate companies from other regions! ~~ For more details, please contact us or request a catalog.

• Joints between components

[NETIS Registered Product] A bridge expansion device with high water stop performance, comfortable driving, and ultra-low noise.

This is a bridge expansion device adopted nationwide, primarily by the Ministry of Land, Infrastructure, Transport and Tourism, NEXCO, urban expressways, local governments, and other public organizations. 【Features (excerpt)】 ◆ Compatible with small to large bridges Handles expansion amounts from 20mm to 600mm, with a maximum gap of 1230mm. Other specifications can be designed separately. ◆ Usable for all types of bridges Can be used for all types of bridges, including steel bridges, PC bridges, RC bridges, as well as arch bridges and curved bridges. ◆ High water-tightness "NS-LL type": The steel plate and sealing rubber are bonded using a mold (press vulcanization bonding), preventing separation between the steel plate and rubber. ◆ Safe and easy installation Can be installed using a 4-ton unic crane without the need for large machinery like medium to large rough terrain cranes, allowing for safe and easy (speed-up) construction. Here’s a brief introduction to some installation examples! ~~ At the Tochigi Prefecture Nikko Civil Engineering Office (Maruyama Bridge), a "Hybrid Joint" was used for renovation work. * NS-LL type repair ~~ At the Kinki Regional Development Bureau Kinokawa River National Road Office (Takasegawa Bridge), it was used for a newly constructed bridge. * 3L type For more details, please contact us or download the catalog.

• Road signs and road accessories
• Foundation construction

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, or management: Are you facing any challenges with current issues or selecting the right sensors for parking management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Vehicle Detection Sensor Basic Guide This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document presents the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who want to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. Depending on the application and installation location, you can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520." 【Recommended for such places!】 ☑ Entrance facing a busy passageway ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passageways ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing to minimize power consumption, contributing to energy-saving effects ● Equipped with a light touch function, allowing the door to open and close simply by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

The television program "Ushiwaka Chapter 6 - The Challenges of Skilled Workers Protecting Japan's Infrastructure" will feature Azeas. In addition to terrestrial broadcasting, there will also be an archive distribution on ABEMA TV. Please be sure to watch. ● Broadcast Schedule Nagoya TV (Me-Tele): June 2, 2026 (Tuesday) at 23:10 ABEMA TV: June 4, 2026 (Thursday) at 24:00 (Free, with archive distribution available) Hiroshima Home TV: June 4, 2026 (Thursday) at 24:45 KKB Kagoshima Broadcasting: June 7, 2026 (Sunday) at 17:25 *For more details, please feel free to contact us through the related link below: [Protective Clothing Wisdom.com]. [Protective Clothing Wisdom.com] is a comprehensive information site for safe working environments, providing guidance on protective clothing and equipment for different work environments, methods for putting on and taking off, and information on customer usage records.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.