[Notice] The logo of the National Slope Disaster Prevention Association has been created.

Acquired VE through NETIS registration! A simple spraying method framework aimed at creating green slopes and disaster prevention, preventing washout and surface erosion of slopes and embankments, and preventing surface peeling!

The Easy Shelf Method is a simplified spraying framework that can be adopted when it is determined that the conventional site-sprayed framework standards are excessive. It is positioned as a greening foundation work, preventing erosion and surface washout on slopes and embankments, as well as stabilizing the base material. We have recently obtained VE certification from NETIS. (NETIS number: KK-160021-VE) The Easy Shelf Method features a framework that is flexible and easy to construct, allowing for the preservation and restoration of green spaces. The benefits of retaining trees include environmental conservation and the reinforcement effect of tree roots, which can also help prevent avalanches. It is advisable to keep trees such as oaks, chestnuts, and beeches, while it is better to cut down planted cedars, dead trees, and trees with poor vitality. A significant feature is that the framework is a site-cast sprayed framework, using only rebar and metal fasteners (glass stands) for the framework structure, which improves workability and shortens construction time compared to conventional spraying frameworks. 【Features of Glass Stand】 - The punched steel plate structure is strong against deformation from external forces. - Reduces the occurrence of cracks after spraying. - The abundance of openings and cuts eliminates mortar edge separation, making it easy to bind and enhancing workability. - Can be stacked for easy transportation.

• Slope protection material
• Civil Engineering Method
• Special Construction Method

Due to its steel plate punching structure, it is strong against deformation caused by external forces and exhibits extremely high holding capacity in relation to the rebar position! *It will be exhibited at the Wakayama Prefecture Kensanpin.

The "Easy Shelf Method Sanbo Type" uses three rebar. It's called "Sanbo" because it has three bars. The Easy Shelf Method Sanbo is designed with a punched steel plate structure, making it strong against deformation from external forces and exhibiting an extremely high holding capacity in relation to the specified rebar positions. It can be stacked for easy transport, which also enhances work efficiency! NETIS Registration Number: KK-160021-VE ＊＊＊＊ Easy Shelf Method Sanbo Type Wakayama Prefecture Ken Sanpin Registered Product Registration Number: R03-1237 *For more details, please refer to the PDF or contact us.

• Gunpowder
• Earth retaining wall/foundation reinforcement
• Concrete construction

Extremely high holding capacity for the rebar position in the simple spray application method framework!

This is a glass stand type that uses four rebar rods, designed for the purpose of creating green slopes and disaster prevention, under the Easy Shelf method of simple spraying frame construction. NETIS Registration Number: KK-160021-VE **Features of the Easy Shelf Method Power Stand:** 1. The punched steel plate structure is designed to be strong against deformation from external forces, exhibiting an extremely high holding capacity relative to the specified rebar positions in the design. 2. It can be stacked for easy transport, enhancing work efficiency. **Features of the Easy Shelf Method Glass Stand:** 1. The glass stand, with its punched steel plate structure, is strong against deformation from external forces and demonstrates an extremely high holding capacity relative to the specified rebar positions in the design. 2. The outer dimensions of the glass stand are designed to ensure a cover of 40 mm at all points relative to the finished shape, helping to reduce the occurrence of cracks after spraying. 3. The glass stand features numerous openings and cuts that eliminate mortar edge cutting and facilitate easy binding, resulting in excellent workability. The glass stand can be stacked, making it easy to transport.

• Slope protection material
• Earth retaining wall/foundation reinforcement
• Civil Engineering Method

The Easy Shelf Method for simple spraying can be utilized as a countermeasure against the frequent short-duration heavy rains occurring recently!

The Easy Shelf Method, promoted by the National Slope Disaster Prevention Association, which is managed by K.F. Corporation, can be utilized as a countermeasure against the recent frequent short-duration heavy rains! 【Countermeasure Situations】 1. As a countermeasure against erosion and collapse of slopes due to surface water: Easy Shelf Method + Vegetation within the frame 2. As a countermeasure against sliding collapse due to infiltrating water: Easy Shelf Method + Mortar spraying within the frame 【Comparison with Precast Grid Frames】 1. All beams are continuous, increasing resistance to ground collapse. 2. Surface water can be smoothly drained. 3. It is closely attached to the ground, making it less susceptible to erosion. 4. It is expected to have a suppressive effect on surface collapse.

• Railway Construction
• Earth retaining wall/foundation reinforcement
• Civil Engineering Method

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. We have many implementation examples available, so please take a look at the case study page.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, or management: Are you facing any challenges with current issues or selecting the right sensors for parking management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Vehicle Detection Sensor Basic Guide This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document presents the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who want to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. Depending on the application and installation location, you can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520." 【Recommended for such places!】 ☑ Entrance facing a busy passageway ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passageways ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing to minimize power consumption, contributing to energy-saving effects ● Equipped with a light touch function, allowing the door to open and close simply by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Dakota Japan Co., Ltd., which specializes in the sale of ultrasonic testing equipment such as ultrasonic thickness gauges, flaw detectors, and axial force gauges, will begin selling its new product, the A-scan ultrasonic thickness gauge 'CMX10-DL', starting June 15. The 'CMX10-DL' is a versatile A-scan ultrasonic thickness gauge that caters to a wide range of applications, from corrosion inspection to high-precision thickness measurement. It supports the measurement of remaining wall thickness in tanks and pipes, substrate thickness measurement over coatings, as well as the measurement of lining materials, composite materials, and clad materials, including precision thickness measurements requiring a resolution of 0.001mm. The CMX10-DL not only saves echo waveforms and measurement values but also supports echo recording for up to 10 seconds. This allows for the recording of instantaneous thickness changes or waveform changes during measurement, thereby streamlining the verification of inspection results and report generation. Additionally, with TCG (Time Corrected Gain), BEA (Bottom Echo Monitoring), and B-scope (B-scan), it supports reliable measurements even for challenging targets such as composite materials, clad materials, and localized corrosion, where waveform judgment can be difficult.