We will be exhibiting at the 2026 Annual Conference on Concrete Engineering (Nara)!

"PERI ISC" optimizes the concrete pouring process at construction sites, contributing to time savings and cost reduction!

<NETIS Registration Number: CB-230029-A> PERI is launching a digital solution that optimizes the concrete pouring process at construction sites, contributing to time savings and cost reduction. 'PERI ISC' (PERI InSite Construction) is a concrete sensor product for construction. This product consists of measuring devices (main Hub and child Nodes), sensors, and a web cloud service that handles the collected data. The installable sensors include temperature sensors, pressure sensors (for lateral pressure measurement), and filling/compaction detection sensors. (In the future, a water-cement ratio sensor may also be available.) By optimizing the pouring work and the operating time of the formwork based on the information collected from various sensors installed within the concrete formwork, it is possible to carry out the demolding process earlier and reduce the amount of necessary formwork materials, leading to labor savings and time and cost reductions at construction sites. Additionally, the web cloud service allows for monitoring and analyzing data without being constrained by time or location. The web-based tools can be accessed from various devices.

• Ready-mix concrete

It is a resin-based formwork system reinforced with fiberglass! <NETIS registration number: KT-230004-A>

Realization of weight reduction through the integration of end materials. Achieving an increase in the number of reuse cycles, this is an environmentally friendly lightweight formwork that is flexible on the construction site! 【DUO Product Features】 ■ New system formwork made of resin ■ High strength and lightweight ■ Fewer components, easy to handle ■ 100% recyclable ＜Simple Assembly Method＞ ・Anyone can easily install it ・No electric tools required ・Vertical and horizontal pipes are not necessary (depending on the construction situation) → Reduces labor costs! ＜Lightweight Resin Formwork＞ ・Easy to carry ・No processing work on site → High workability and shortened construction period! ＜Durable Resin Panels＞ ・Reuse cycles for face panels: 80 to 100 times (Replacement of face panels is possible.) ・Easy to clean → Reduces material costs and waste! ＜NETIS Registration Number: KT-230004-A＞ https://www.netis.mlit.go.jp/netis/

• Concrete construction

Domestic softwood concrete formwork plywood

"PERI NS Cypress" is a high-quality film-faced plywood jointly developed by Perry Japan Co., Ltd. and Nisshin Co., Ltd. It uses a special film that is unprecedented and specifically designed for coniferous trees! Additionally, internal tests by the PERI Group have confirmed a reuse count of 20 times. (Please ensure that release agent application and surface scraping/cleaning are performed to extend the reuse count.) 【Product Features】 ■Reuse Count Cleared 20 reuses in our internal tests. (*Reuse count may vary depending on the handling method of the product.) ■Quality Control Program JAS certification (obtained) PEFC certification (scheduled for registration) Rigidity tests by a public third-party organization ■Price Please feel free to contact us. Joint Development Partner: Company Name: Nisshin Co., Ltd. Address: 100 Nishi Industrial Park, Sakaiminato City, Tottori Prefecture, 684-0075 TEL: 0859-47-0303 FAX: 0859-47-0313 https://www.nisshin.gr.jp/ *For more details about this product, please feel free to contact us.

• Formwork material

This year, we will hold the large exhibition "Wood and Living Expo" organized by Nice! Approximately 150 domestic housing and building material manufacturers will gather to showcase the latest equipment and noteworthy new products. Additionally, many specialized seminars will be held to learn about the latest industry trends and future outlooks! It will be a two-day event filled with business tips and seeds for new proposals. We sincerely look forward to your visit. ■ Dates: October 15, 2026 (Thursday) 10:00-17:00 October 16, 2026 (Friday) 10:00-16:00 ■ Venue: Pacifico Yokohama, Hall C&D ■ Organized by: Nice Co., Ltd., Japan Wood and Housing Research Association, Japan Trustworthy Renovation Promotion Association ■ Official Website: https://woodlivingfair.jp/ ■ Pre-registration: https://www.tenjikai-uketsuke.com/form/wood-living-expo-2026/ * Pre-registration is required for attendance. When registering, please select "R&D Center" as the department in charge of Nice.

RAMPF Group Japan will be exhibiting a catalog at the Precision Engineering Society's 2026 Autumn Conference held from September 15 (Tuesday) to 17 (Thursday) at Tohoku University Kawauchi Campus. This time, we will showcase two unique products: 【EPUSELF 130JP】⇒ A unique "DIY kit." You can easily handle mineral casting without special equipment. By simply pouring it into a machine bed of a tabletop lathe or a metal frame, you can expect a significant increase in damping properties. 【EPUMENT Ultralight FLOW】⇒ Possibly the world's first "ultra-lightweight" mineral casting. Its specific gravity is only 0.7 (typically around 2.4)!! If poured into parts that need to be lightweight, it can reduce weight while significantly enhancing damping properties. We will have flyers and samples available, so please feel free to take a look and check them out. Mineral casting that is easy to implement and budget-friendly can be used for various applications, depending on your needs. Although our staff will not be permanently stationed, we will be available to answer any questions you may have, so don't hesitate to ask!

Tobii Technology will hold the "Tobii Latest Eye Tracker Experience Event," which received great acclaim in Nagoya recently, in Fukuoka as well. On November 12 (Thursday) and 13 (Friday), for two days, you can see, touch, and experience Tobii's latest eye trackers and software. Whether you have never used eye tracking before, are considering its introduction for research or business, or want to try the latest products and technologies, please feel free to join us. - What can be understood through eye tracking? - Can it be utilized in my research? - How can it be used for skill transfer and on-site improvements? - I want to try the actual equipment and software. Tobii staff will be on-site to answer any questions or consultations directly. 【Event Format】 Free entry and exit Participation is possible without a reservation (priority given to those with prior reservations during busy times) *Please bring your business card. This is a valuable opportunity to experience Tobii's eye trackers in the Kyushu area. We sincerely look forward to your visit.

We would like to invite you to the online product presentation of "4DKanKan," a tool that promotes 3D digitalization and DX of sites and facilities. With a 3D digital twin camera that can simultaneously capture ultra-high-definition 16K panoramic photos and 1cm mesh point cloud data, you can advance the digitalization of your site without any specialized knowledge. 【Free】4DKanKan Online Product Presentation Presentation Content: 1. What is 4DKanKan? 2. Introduction of features using captured data 3. Introduction of optional services (hardware and software) 4. Use cases 5. Pricing and implementation methods 6. Q&A Do you have any of these concerns? - The burden of travel for site inspections is high - It is difficult to share the situation with just photos - You are interested in utilizing point clouds and 3D data but do not know how to implement them "4DKanKan" is here to solve these issues. It is being utilized to improve efficiency across a wide range of industries, including construction management, surveying, manufacturing, infrastructure, and events. Small starts are also possible through rentals, proof-of-concept experiments, and photography contracts. If you are considering DX initiatives for the next fiscal year, please join us.

We will be exhibiting at the 3rd Decarbonization Exhibition for Material Factories during the High-Performance Materials Week 2026 Tokyo Exhibition, held at Makuhari Messe from September 30 (Wednesday) to October 2 (Friday). At our booth, we will introduce our efforts to solve challenges in advanced materials such as semiconductor materials and battery materials through engineering solutions, creating new value. When you visit, please stop by our booth in Hall 6, 35-34.