Our product has been registered with NETIS! "Concrete Pavement Curing Agent Spraying Machine"

Significantly contributes to the labor-saving process of curing agent application at concrete paving sites!

This machine is a device that mechanically and uniformly applies curing agents during the initial curing of concrete pavement. It is expected to improve economic efficiency by reducing labor costs and material loss, as well as enhancing quality, safety, and workability. Traditionally, workers performed the task manually using a sprayer. Compared to manual application, the automatic curing agent dispensing machine is expected to maintain a consistent amount of curing agent without increasing the workforce. As a result, it helps maintain the appropriate moisture level and ensures sufficient curing, contributing to the durability of the concrete! ■ Automatic Curing Agent Dispensing Machine <NETIS Registration Number: CB-240009> The machine can be easily operated by one operator using an electric control panel for both main operation and dispensing. After work is completed, it only requires rinsing the pump with water, making daily maintenance less burdensome. It was registered with NETIS in 2024! ■ Manual Curing Agent Dispensing Machine Dispensing is done by workers pushing the dispensing machine on the workbench, moving it left and right while applying the curing agent.

• Paving Materials
• Paving of sidewalks, roads, parking lots and stadiums
• Construction machinery leasing and rental

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

We will be exhibiting at the "47th Annual Conference of the Japan Society for Occupational Environment Measurement / Occupational Health Engineering Society Exhibition of Occupational Environment Measurement Related Equipment." We plan to showcase protective clothing and other safety and health protective gear. We look forward to your visit! ● Date: October 21 (Wednesday) to October 23 (Friday), 2026 ● Venue: Ehime Prefectural Culture Hall If you have any questions, please feel free to contact us through the related link [Protective Clothing Wisdom.com]. [Protective Clothing Wisdom.com] is a comprehensive information site operated by Azeas Co., Ltd. for a safe working environment.

On October 23, 2026 (Friday), Sysmet Co., Ltd. will present at the "2026 Fiscal Year 1st Private Technology Presentation (PAT)" hosted by the Sendai Port and Airport Technical Research Office of the Tohoku Regional Development Bureau, Ministry of Land, Infrastructure, Transport and Tourism. On that day, we will present our comprehensive marine phenomenon platform, Compass PLUS. Compass PLUS has a proven track record in offshore construction and port construction, providing a service that allows for centralized management of predicted and observed information such as wind speed and wave height in the cloud. We will share examples of how Compass PLUS is utilized in actual caisson installation and breakwater construction, as well as how Sysmet Co., Ltd. has developed products with "information sharing" as a key concept. Event Overview Date and Time October 23, 2026 (Friday) 13:10 - 17:00 Venue AB Conference Room, Port and Airport Department, Tohoku Regional Development Bureau, Ministry of Land, Infrastructure, Transport and Tourism 9th Floor, Sendai Government Building B, 3-3-1 Honcho, Aoba Ward, Sendai City, Miyagi Prefecture Format Held both in-person and via WEB (Microsoft Teams) Organizer Sendai Port and Airport Technical Research Office, Tohoku Regional Development Bureau, Ministry of Land, Infrastructure, Transport and Tourism