The 24th SMART ENERGY WEEK (Autumn) International Wind Power Exhibition

Multi-point measurement capable FBG sensor

This product consists of an interrogator that performs light emission and reception for sensing, and an FBG fiber that has been processed with Fiber Bragg Grating (FBG). ■ Interrogator A compact and lightweight interrogator equipped with the components necessary for the analysis of Fiber Bragg Grating (FBG). ■ FBG Sensor Chain The FBG sensor chain is an optical fiber cable processed with Fiber Bragg Grating (FBG), allowing for flexible customization. The cable length can be up to 500 meters, and measurement points can be freely set, with a minimum spacing of 1 mm. It can also be used in combination with your currently used interrogator.

• Other measuring instruments

High-efficiency cooling technology: An optimal cooling solution for thermal management of high-output electronic devices.

This is a cooling module developed for power electronics using CooliBlade's unique NEOcore technology. <Features of NEOcore Technology> - High efficiency. High thermal conductivity. - Lightweight: Achieves weight reduction with less raw material compared to other heat sinks. (Approximately 50% lighter compared to aluminum) - Easy integration into various power electronics products. - Excellent mass production capability. It provides effective cooling solutions for high-power electronics products such as IGBT power semiconductors, AC drives, industrial control devices, electric vehicle charging, 5G communication, smart grids, and LED lighting in stadiums. If you are struggling with heat dissipation design and thermal management for high-output electronic devices, please contact us.

• Other lighting fixtures

Can be used in harsh environments such as high temperatures and high frequencies. Measurement of dynamic pressure waves in turbochargers.

The Alpheus100 from Phonoptics is a dynamic pressure sensor that can be used in harsh environments such as high temperatures and high frequencies. ■ Compact: Sensor dimensions: Diameter Φ3.2mm, Φ2.5mm (※Φ1.25mm in development) ■ Lightweight: 0.5g (sensor head) Due to its fiber-optic design and small diameter, it can also be used for pressure measurements inside pipes. ■ Excellent explosion-proof properties The sensing part uses only glass and fiber, making it highly explosion-proof. ■ Accurate measurements in harsh environments. - RF/EMI-free, no influence from electromagnetic waves - Calibrated for better response speed and sensitivity than piezo sensors, allowing for more accurate measurements. ■ Frequency range: 40kHz, 100kHz (other specifications available upon request) ■ Operating temperature: up to 600℃ (※ up to 1000℃ in development) ■ Capable of detecting vibrations in liquids.

• Other measuring instruments

Cost-effective converter for optical fiber sensors.

Mini Myotis is a cost-effective converter that can be used with Phonopitcs' optical fiber sensors (acoustic (microphone), dynamic pressure, vibration, tachometer (rotational speed meter), etc.) that are operable in harsh environments such as high temperatures and high magnetic fields. - Built-in SLED light source, photodiode, and microcontroller - Compatible with various sensors from Phonoptics (acoustic sensors, dynamic pressure sensors, vibration sensors, tachometers, etc.) - Enhanced stability with heat sink housing - Supports various outputs including BNC output

• Other measuring instruments

[Non-destructive testing] Non-contact inspection can be performed using terahertz light without damaging the measured object. An all-in-one model equipped with a scanning stage and software.

The terahertz imaging system "uSense" from OPTIKAN is an all-in-one terahertz imaging device that comes with a tablet equipped with FMCW (Frequency Modulated Continuous Wave) radar, a scanning stage, and control software. It allows for non-destructive and non-contact measurements of various sample materials without causing damage using terahertz light. It can be used not only for the evaluation and research of materials such as resins and composite materials but also for offline quality control, defect detection, and foreign object detection in industrial applications. Please consider it for measurement applications that are difficult to detect with conventional inspections such as X-ray testing. - All-in-one model designed for research and offline quality inspection - Supports a wide scanning area - High sensing speed

• Non-destructive testing

Achieving a tracking resolution of approximately 0.0001 pixels with a unique algorithm.

MotionScope's strain measurement system achieves a tracking resolution of approximately 0.0001 pixels through its unique algorithms. In addition to providing a system that includes cameras as a turnkey solution, we also offer sets that allow customers to select lenses, lighting, speckle, and more according to their specific applications. Since measurements can be taken non-contact, it is possible to measure various objects such as the blades of wind turbines and large buildings or structures. ■ Measurement of displacement (visualization of movements less than 1μm) ■ Ability to magnify and analyze the motion of objects ■ VMA (Visual Modal Analysis): Visual Modal Analysis ■ Smart aliasing: Measurement up to 14 times the Nyquist limit is possible. ■ BOSchlieren (Background Oriented Schlieren): Background-oriented schlieren.

• others

We will be exhibiting at the "62nd JAPAN DIY HOMECENTER SHOW 2026." This year, the largest exhibition in the industry will be held with the theme "Let's Go to the DIY Festival in Summer!" Please be sure to visit our booth (No. M31). ■ Introduction of Exhibited Product: Insulation Material "SS Premier" We are introducing "SS Premier" with the concept of moving away from the existing 20mm thick insulation materials. [The secret of 5mm. Maintaining performance while being overwhelmingly thin, light, and easy to install.] - Achieves insulation performance equivalent to RW50mm with a thickness of just 5mm, making it possible to install in limited spaces. - As a sheet material, it can accommodate both round and square ducts. - Lightweight and flexible, making transportation and handling easy, reducing the burden on the job site. Compared to conventional products, it offers advantages in installation space, transportability, and retail display. It has numerous implementation records across the country, including government projects such as the Shibuya Ward Office reconstruction project, as well as universities, hospitals, and large-scale new construction projects. At the venue, you can take a look at actual product samples. All of our staff are sincerely looking forward to your visit at booth No. M31.

Kou Alpha X Co., Ltd. will be exhibiting at the "Automatic Identification Comprehensive Exhibition" held at Tokyo Big Sight. At our booth, we will showcase a wide range of products, including metal-compatible RFID tags (PMT series), "keychain-type tags," and "rugged, environment-resistant tube tags." We look forward to your visit.

North Engineering, the Taiwanese agent of Tokkyo Kiki Co., Ltd., will exhibit at the international exhibition "SEMICON TAIWAN 2026" held in Taiwan. At "SEMICON Taiwan," we will showcase products for micro-vibration and magnetic field countermeasures for semiconductor manufacturing plants, as well as seismic isolation devices for transformers and vibration-damping devices for air conditioning outdoor units as earthquake countermeasures. Event Dates: September 2 (Wednesday) - September 4 (Friday), 2026 Venue: Taipei Nangang Exhibition Center (TaiNEX Hall 1 & 2, Taipei City, Taiwan) Booth Number: K2568 (TaiNEX 1, 1st Floor)

"I don't have anyone in the company to ask if this is the right way to segment." "I can't decide whether it's okay to delete the scenarios set up by my predecessor." I often hear such voices from those in charge of operating MA tools. In this seminar, Shannon, as an MA vendor, will publicly share how they operate MA within their own marketing department, using the actual management screen. Please note that this seminar will not be recorded or archived. It will be presented only to the 15 companies that attend in person. [Screens to be viewed on the day] (tentative) 1: Conditions for segmentation 2: Flow and branches of scenarios 3: Discarded settings [Recommended for those who] - Are almost solely responsible for operating MA tools - Have not been able to make changes to the settings inherited from their predecessor - Feel that they are not using MA as they had originally intended - Want to know how other companies are actually operating at the screen level - Are considering reviewing their current MA tools

Our manufacturer, Shirok, will be exhibiting at the High-Performance Materials Week Tokyo Exhibition held at Makuhari Messe, with participation from Kō Alpha X Co., Ltd. We plan to showcase various silicone products, including silicone prepolymers, at our booth. We sincerely look forward to your visit. Register for attendance here: https://www.material-expo.jp/tokyo/ja-jp/register.html