We will be exhibiting at the Construction Fair Hokuriku 2025 in Niigata.

【NETIS】Streamlining the installation of scaffolding on vertical and sloped surfaces. An ultra-lightweight aluminum scaffolding bracket for vertical and sloped surfaces, weighing only 4.3 kg and resistant to rust.

The "Alwalk" is an aluminum vertical slope scaffold bracket that combines work efficiency, versatility, and safety. No assembly is required; just insert the pin! It can be attached to 48.6Φ single pipes, 50mm square pipes, and 60mm square pipes. By using options, it can be attached to the top edge, to 5-minute and 6-minute bolts, and to vertical walls and sloped walls (such as tail arms, super tail arms, and other vertical and sloped walls), allowing for various adjustments in installation height. It is suitable for high-altitude work in retaining wall construction for bridges, dams, sediment control embankments, and breakwaters, as well as for scaffolding for final inspections. 【Features】 - Compatible with 48.6Φ single pipes, 50mm square pipes, and 60mm square pipes (hooks can be removed) - Supports slope angles from vertical to approximately 10% incline - Can be directly attached to concrete structures - Easy installation of handrails - Available for rental (nationwide service)

• Scaffolding and Support Materials

[NETIS Registered Product] A scaffolding bracket that can be easily installed by simply inserting and tightening it into a drainage pipe! Significantly reduces the time required for installing retaining wall scaffolding.

The "Drainage Pipe Scaffolding" is a scaffolding bracket specifically designed for the installation of drainage pipes, which can be easily set up by simply inserting it into the drainage pipe and tightening it. It is suitable for inspection and repair of retaining walls, as well as for final inspections, and it streamlines the scaffolding installation process. 【Features】 ■ Fixed by simply inserting into the drainage pipe and turning the nut ■ Compatible with pipes ranging from 50mm to 100mm in diameter ■ Can accommodate pipe slopes of up to 25° ■ Foldable design reduces storage space and transportation costs ■ Easy installation of handrails with just bolt fastening ■ Available for rental (nationwide service) *For more details, please refer to the PDF document or feel free to contact us.

• Scaffolding and Support Materials

It firmly adheres to cracks with high flexibility and adhesion, contributing to the longevity of the pavement. A dedicated melting furnace is also available.

"Super Flex" is a heat-applied crack injection material suitable for repairing cracks in asphalt and concrete pavements. It excels in flexibility and adhesion, adhering strongly while flexibly following the movement of the pavement, contributing to improved waterproofing and durability. By using the dedicated melting furnace "Mini Melter," efficiency in construction can be enhanced, reducing the burden of on-site work. 【Features】 ■ Maintains high adhesion and flexibility without melting even in summer temperatures ■ High flexibility against variations in joint width, making it suitable for cold regions and high-traffic areas ■ Prevents rainwater infiltration from crack areas, contributing to the longevity of the pavement ■ Reduces noise and vibration from vehicles through stress relief *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• glue

A "non-contact switch" that allows you to open and close doors simply by waving your hand, without directly touching the doorknob or switch! By adopting microwave technology, the risk of malfunction due to condensation caused by temperature differences in environments such as low-temperature warehouses is significantly reduced. It reduces the risk of virus and bacterial infections in places where hygiene is a concern, such as food factories, hospitals, nursing facilities, and restaurant kitchen entrances. 【Features】 ○ Reduces the risk of virus infection by allowing door operation without contact ○ Waterproof and dustproof (IP55 design), making the main unit washable with water (note: the wall surface (back side) is not included) ○ LED display and response sound allow for immediate confirmation of detection status ○ Two pattern settings for one-shot and latch output are possible ○ The thinnest in the industry! Only 22mm thick! ◎ For more details, please download the catalog or contact us.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

On August 19th (Tuesday), the Japan Meteorological Agency announced the three-month forecast from September to November. During this period, the upper-level westerlies are expected to flow more to the north than usual, and the Tibetan high-pressure system is anticipated to be stronger and positioned further north than average. *For more details, please visit our website or feel free to contact us.*

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Crossnote, which allows for the efficient creation and maintenance of thick specifications, regular reports, manuals, and other documents, has undergone a major version upgrade to ver 3.0. Crossnote is a system designed for multiple users to efficiently create and maintain documents. Unlike Wiki or Markdown, it achieves a "what you see is what you get" usability similar to Word. In this major version upgrade, both the client and server frameworks have been updated to the latest versions, improving security measures, operational environments, and compatibility with the latest technologies. Additionally, numerous functional improvements have been made. By updating the framework, we have further accelerated our support for AI.