Walon opens a showroom at its Nagoya headquarters - Providing a space for problem-solving that aligns with space creation and product development.

Expressing the beauty of washi as it is. We are committed to considering environmental impact and working towards the realization of a circular society.

The "Acrylwaron Print Type Environmentally Friendly Product" is an environmentally conscious, Japanese-style acrylic decorative resin board that enables the creation of a soft light space with a washi paper pattern. <Features> ■ Based on recycled acrylic sheets that reduce CO2 emissions by over 70% during manufacturing. ■ Contains over 70% recycled materials and is certified as an Eco Mark product by the Japan Environmental Association. * Please note that finished products processed and assembled using Acrylwaron environmentally friendly products cannot use the Eco Mark. ■ Durable and resistant to breakage. ■ Beautiful design It expresses the texture and feel of washi paper, allowing for the creation of a soft light space. ■ Excellent light and water resistance The acrylic material is superior in light and water resistance. ■ Molding processing is possible Since it uses acrylic printed film, it can be processed similarly to general acrylic resin sheets, including heat molding. * The natural colors (P-80RE, P-81RE, P-85RE) may fade due to ultraviolet light, so please avoid outdoor use. * For more details, please refer to the PDF materials or feel free to contact us.

• Special shoji paper

Gently filter light through washi paper. It can be used in a panel format while maintaining its beauty.

"Acrylwaron (one-sided washi paper type)" is an acrylic decorative resin board that can be used like a panel, with washi paper laminated directly onto the acrylic sheet. It directly expresses the softness and beauty of washi paper. 【Features】 ■ Washi paper laminated directly onto the acrylic sheet ■ Direct expression of the softness and beauty of washi paper * Molding, bending processing, and maintenance of the washi paper surface are not possible. * For more details, please refer to the PDF document or feel free to contact us.

• Special shoji paper

Expressing the beauty of washi as it is. It is possible to create a soft light space.

The "Acrylwaron Print Type Basic Series" is a Japanese-style acrylic decorative resin panel that enables the creation of a soft, illuminated space with a washi paper pattern. 【Features】 ■ Resistant to breaking ■ Molding processing possible (except for 1.0mm thickness) ■ Washable ■ Excellent light resistance* ■ The PN type uses a high-transmittance milky color, making it ideal for situations requiring prevention of light source reflection and high whiteness. ■ P-80, P-81, and P-85 are optimal for incandescent light sources. ■ Adhesive processing is possible with acrylic solvents. *The natural colors (P-80, P-81, P-85, PN-80, PN-81) may fade due to ultraviolet light, so please avoid outdoor use. *For more details, please refer to the PDF materials or feel free to contact us.

• Special shoji paper

The surface is finished with a special embossing process, making it supple and soft while diffusing light.

The "Acrylaron Print Type Everlight Series" is a product with a modern design achieved through embossing. It is resistant to breaking and offers excellent light diffusion and light resistance. 【Features】 ■ Break-resistant ■ Excellent light diffusion ■ Excellent light resistance ■ Molding processable (the surface embossing shape may change depending on the molding shape and conditions). *For more details, please refer to the PDF materials or feel free to contact us.

• Special shoji paper

Acrylic decorative resin board that expresses subtle light contrasts and gradients with delicate gravure printing.

The "Acrylaron Modern Art Series" is an acrylic decorative resin board that expresses a Western-style sensibility in a modern way. In addition to two types, Standard and White, which have subtle differences in shading, "P-406" uses two different printed films with distinct patterns to achieve a soft depth and high diffusion when light passes through. 【Features】 ■ Resistant to breakage ■ Washable ■ Can be bonded with acrylic solvents. ■ Molding processing possible (excluding 1.0mm thickness) *For more details, please refer to the PDF materials or feel free to contact us.

• Special shoji paper

Soft texture using special fibers with approximately three times the burst strength of shoji paper.

"High-Tech Ace" is a product that maintains almost the same strength even when wet and is easy to replace. In comparison to the lower limit of the JIS standard bursting strength for shoji paper, which is 78.45 kPa, this product has an average value of 238 kPa. It is resistant to tearing and reproduces the elegant texture of washi paper. *For more details, please refer to the PDF document or feel free to contact us.

• Special shoji paper

Virus protection in places you touch unconsciously. Special reinforced shoji paper that adds peace of mind to creating a clean and hygienic environment.

This is a Waron sheet that combines antiviral and antibacterial properties certified by SIAA (Society of Antibacterial Products Technology). 【Features】 ■ Washable with water ■ Retains the texture of washi paper while maintaining antibacterial and antiviral effects* ■ Flame-retardant certified product ■ Provides a safer environment as it is less flammable * SIAA certification ■ Antiviral properties Reduces the number of specific viruses adhered to the product by over 99% after 24 hours (evaluated by ISO 21702 (antiviral testing) and meets SIAA standards) ■ Antibacterial properties Suppresses the growth of bacteria on the product by over 99% after 24 hours (evaluated with JIS Z 2801 test strains: Escherichia coli and Staphylococcus aureus, meeting SIAA standards) ★ For more details, please refer to the PDF document or feel free to contact us.

• Special shoji paper

The beauty of washi is preserved, while also excelling in durability and flame resistance, making it a Japanese-style interior material suitable for various spaces.

A wide variety of patterns, thicknesses, and sizes of traditional Japanese building materials. This special reinforced washi, laminated with polyvinyl chloride resin, includes basic washi such as Unryu and plain patterns, which are based on Japanese culture and tradition, as well as craft washi made using various decorative techniques. 【Features】 ■ Tear-resistant ■ Stain-resistant ■ Washable with water ■ Flame-retardant product certified / Certified by the Japan Flame Retardant Association ■ Creates a soft, illuminated space ■ Abundant variations in patterns, sizes, and thicknesses 【Awards】 HEAD Best Selection Award (now known as Mirai no Tane Award) 2016 from the HEAD Research Association.

• Special shoji paper

A Japanese-style interior material that expresses the beauty of washi as it is, with excellent water resistance and durability.

This is a Japanese-style interior material laminated with vinyl resin, featuring washi patterns and non-woven fabric patterns. Since it uses printed film, it does not absorb water from the edges, and the material itself can be washed with water. It can also be used for short-term outdoor event decorations. It has a high light transmittance, adding a delicate illuminated effect to the space. 【Features】 ■ Tear-resistant ■ Stain-resistant ■ Can be wiped with water and washed with water

• Special shoji paper

A Japanese-style interior material that has minimal expansion and contraction due to temperature changes, excellent durability, and strong impact resistance.

Japanese-style building material laminated with PET resin, which has low expansion and contraction due to temperature changes, using natural washi paper. When applied to shoji screens, it is resistant to sagging, has excellent durability, and is extremely strong against impact. The surface is finished to resemble washi paper and is also water-wipeable. Depending on the settings, laser processing is also possible. 【Features】 ■ Resistant to sagging due to low expansion ■ Strong against impact (approximately 3 times the burst strength of 0.2mm Waron sheet, according to our research) ■ Tear-resistant ■ Stain-resistant ■ Water-wipeable ■ Creates a soft, illuminated space

• Special shoji paper

A decorative film with a Japanese style that beautifully expresses the elegance of washi patterns and excels in design.

This is a Japanese-style glass decorative film featuring washi patterns and non-woven fabric patterns. By applying it to glass, it enables the creation of a soft light space. It can be used in various space designs, regardless of Japanese or Western styles. It has obtained non-combustible material certification from the Minister of Land, Infrastructure, Transport and Tourism. 【Features】 ■ Non-combustible material certification (see basic information) ■ Easy to process and install ■ Creates a soft light space with washi and non-woven fabric patterns

• Spatial Design

Reinforced shoji paper with approximately five times the burst strength. It is tear-resistant, breathable, and resistant to dirt.

A special reinforced shoji paper that is difficult to tear and has approximately five times the bursting strength*. It is durable and long-lasting, with little change in strength even when wet. It features a beautiful tautness without sagging. Additionally, it is designed to be less breathable, making it resistant to dirt even when air passes through. It can be easily replaced without falling apart. A wide type suitable for large fixtures is also available. *The average bursting strength is 431 kPa compared to the lower limit of 78.45 kPa for JIS standard shoji paper. 【Features】 ■ Difficult to tear, durable, and long-lasting ■ Resistant to dirt even with breathability ■ Beautiful tautness without sagging ■ Little change in strength when wet ■ Easy to replace ■ UV cut of over 90% ■ Creates a soft, illuminated space

• Special shoji paper

Large partition, suitable for water-related uses such as bathrooms. Lightweight and safe, with a Japanese-style translucent design panel.

This is a Japanese-style decorative polystyrene (PS) resin board that is resistant to high humidity environments and suitable for use around water. It is lightweight, weighing less than half that of glass, and is less prone to breaking. It also expresses the texture of the material as is, allowing for the creation of a soft lighting space. Additionally, the 4.0mm thick type is 2430mm long, making it ideal for large partition applications such as interior doors and space dividers. 【Features】 ■ Resistant to moisture ■ Less prone to breaking ■ Washable ■ Superior light resistance compared to general polystyrene resin ■ Lightweight and safe ■ Creates a soft lighting space

• Shoji screen

A decorative resin panel with a beautiful traditional Japanese paper appearance, excellent in fire resistance and durability.

A variety of patterns, thicknesses, and sizes of traditional Japanese building materials. This is a decorative resin board that incorporates traditional Japanese culture and design, featuring cloud and plain patterns made from washi paper, which has been crafted using various decorative techniques and laminated with vinyl chloride resin. 【Features】 ■ Resistant to cracking ■ Resistant to dirt ■ Can be wiped with water ■ Certified as a flame-retardant product / Certified by the Japan Flame Retardant Association ■ Creates a soft light space ■ The Everlight series is washable

• Shoji screen

An acrylic decorative resin board that faithfully reproduces the design of washi paper and can be used for various purposes. It also excels in light resistance and processability.

This is a Japanese-style acrylic decorative resin board that delicately expresses the beauty of washi paper and the texture of gauze, allowing for the creation of a soft light space. It can be processed in the same way as standard acrylic resin boards (excluding the 1.0mm thickness and single-sided washi paper laminated types). Additionally, the product numbers starting with PN are based on high-transparency semi-milky acrylic resin boards, making them suitable for situations where reflection prevention from light sources and high whiteness are required. 【Features】 ■ Resistant to cracking ■ Molding processing possible (excluding 1.0mm thickness and single-sided washi paper laminated types) ■ Washable ■ Excellent light resistance* ■ Creates a soft light space ■ Can be bonded with acrylic solvents *Some product numbers are not suitable for external use. Please refer to the catalog and our website for product information.

• Other fittings
• Spatial Design
• Shoji screen

Thank you for your continued support. On February 18, 2026, we will release the comprehensive weather platform ZEROSAI X-AI. Our strength lies in the ability to integrate AI for wind speed forecasting, weather observation, environmental data, and hazard notifications, in line with traditional pinpoint weather forecasting. On the same day, we will also release a cloud-managed dust meter as a new option for the comprehensive marine platform Compass PLUS. For more details, please visit our website.

We have prepared a product catalog for the high-performance sound-absorbing material brand Ecophon. This catalog clearly summarizes a diverse lineup of products designed to enhance the acoustic quality of spaces, featuring photographs, case studies, and sound absorption performance graphs. "When sound changes, the space changes." Ecophon's sound-absorbing materials are designed to improve comfort in various settings, including offices, educational institutions, medical facilities, and commercial spaces. In this catalog, you can find detailed information on the features, specifications, and design variations of each product. You can contact us through the inquiry form on the official Ecophon website to download it for free. We hope it will be useful for your space creation and sound environment improvement considerations.

When buying new cosmetics, while the bottle design is important, what catches the eye first is definitely the "box." When faced with a selection of many cosmetics and unsure of which to choose, it often comes down to making a "package purchase," similar to impulse buying based on the cover. This time, we asked our long-time partner, the cosmetics manufacturer Kurecos Co., Ltd., why they continue to create packages with Kaypack. 【I can hardly remember when we started working with Kaypack】 We began our dealings with Mr. Kita (Kaypack) over 20 years ago, so long ago that I can hardly remember the beginning. In the early days, we relied on another packaging company. However, since starting our relationship with Mr. Kita (Kaypack), we have entrusted the majority of our packaging production to them. There is a mutual understanding developed over our long relationship, and the sense of security that comes from knowing they understand everything makes it easy to request work from them. There is a level of stability that allows us to build trust.

The "Hybrid Joint TCF Type" is a bridge expansion device designed for the Tohoku region that responds to "compacted snow," which occurs due to vehicle traffic after snowfall. It meets the 10kN snow load standard set by the Tohoku Regional Development Bureau. Additionally, it adopts a structure known as the "face plate type," which ensures that the water-stopping material does not become exposed on the surface, and it comes standard with "secondary water-stopping material." By employing a double structure, it reduces the risk of leakage and achieves higher water-stopping performance. Furthermore, to prevent snowplow blades from getting caught on the expansion device, it also comes standard with a "snow removal guide plate." This not only protects the product itself but also considers safety during snow removal operations.

Castem Co., Ltd. and Castem Global Group's Castem Vietnam held a completion ceremony for the newly established Vietnam factory in Quang Ninh Province, Northern Vietnam, in January 2026. This is the first time our group has expanded into Vietnam, and this factory will be our seventh overseas production base. After the planned second phase of construction, it is expected to become the largest production base in the group in the future. The factory will manufacture lost-wax precision casting parts used in semiconductors, precision machinery, and construction machinery. We chose Vietnam, where economic growth is anticipated, as a new production base for our main business of lost-wax precision casting. Currently, we are advancing prototype production and plan to start mass production by the end of May 2026. Once the second phase of construction is completed by the end of 2028, we will ultimately be able to produce one million units per month (with a product shipment weight of approximately 120 tons per month). On the day of the ceremony, about 100 participants, including business operators and local stakeholders, attended and toured the various processes such as mold making, casting, and processing. Although we are starting with a compact system in terms of equipment and personnel, we will continue to take on challenges and advance our business to a new dimension.