Notice of participation in the "Hokkaido Civil Engineering and Architecture Future Technology Exhibition 2025" from July 2 (Wednesday) to July 3 (Thursday), 2025.

For tunnel construction and night work! Displaying highly visible virtual signs to contribute to safety management.

The Virtual Sign is a system that projects pre-set signs from a high-brightness light source mounted on the main device, by setting the signs in advance on the cloud at the site office or similar locations. By brightly and clearly projecting signs at tunnel construction sites or nighttime construction sites, it effectively informs site workers of restrictions and raises awareness. Various sign contents for use at construction sites are prepared, and the display content can be changed remotely via the cloud, reducing the hassle of installing or replacing signs and leading to labor savings. The main device is equipped with a communication terminal, and the connection to the cloud can be selected from LTE, wired LAN, or Wi-Fi. It is also possible to project sensor information and surveillance camera footage installed at the communication site via the cloud. Additionally, it has dustproof performance that allows it to be used without impact in tunnel construction, as well as waterproof performance for use in rainy weather. By projecting images from a high-brightness light source, it is possible to create large and clear sign displays, similar to projection mapping, by installing the device in locations that do not obstruct vehicle traffic.

• Road signs and road accessories

Eliminate the troubles of dead zones where radio waves do not reach!

【NETIS Registration Number】KT-240171-A Enables the establishment of wireless LAN in outdoor environments without communication infrastructure. You can choose satellite, optical, or LTE lines as the starting internet connection, and by combining wireless Wi-Fi access points, it allows for the construction of wireless networks in areas where communication is unavailable, such as in tunnels under construction or during sediment control dam work in mountainous regions, within the areas required by customers. We provide optimal solutions tailored to the site environment and usage scenarios. We will strongly support the improvement of productivity in the construction industry through the promotion of the introduction of construction DX technology in communication-deprived areas. 【Features and Characteristics】 ■ Ideal for remote presence in communication-deprived areas! ■ Communication methods include three types: satellite, optical, and LTE lines ■ Combinations can be tailored to applications and purposes ■ Wi-Fi areas can be easily set up at any desired point ■ Highly flexible solutions can be constructed *Please feel free to contact us via the "Contact Form."

• Information and communication equipment and infrastructure

Reduce working hours by approximately 50-70%! Significant improvements in productivity and work efficiency with AR rebar inspection that can be conducted by one person.

【NETIS Registration Number】CB-230022-VE 'BAIAS' is an AR system for rebar inspection of reinforced concrete structures that allows a single person to easily conduct inspections using a tablet. By automatically measuring the number, diameter (thickness), and spacing of rebar from images taken with a tablet, it significantly reduces the time and effort required for inspections. This system enables what was traditionally a multi-person task of inspecting rebar in reinforced concrete structures to be performed easily by one person, contributing to labor-saving and efficiency on site. 【Features】 ■ Measurement of rebar spacing is possible even with double rebar ■ Supports measurement of cover thickness ■ Contributes to labor-saving in the inspection process with the electronic blackboard function ■ Reduces preparation and work effort with the two-point measurement function *For more details, please refer to the PDF document or feel free to contact us. *This product is for the domestic market.

• Reinforced concrete construction

コンクリート養生における配筋検査と季節の温度管理をまとめて解決！人材/時間のコストも大幅に短縮いたします！

NETIS登録製品｢BAIAS｣と｢おんどロイド｣の合わせ技！ 時間と人材にかかるコストを大幅にカットいたします。 ★配筋検査ARシステム｢BAIAS｣【NETIS登録番号:CB-230022-VE】 1名で実施可能なAR配筋検査で生産性や作業効率が大幅に改善！ iPad Pro1台で鉄筋コンクリート構造物の配筋検査を誰でも簡単に実施できます。 LiDARセンサーやARマーカーを用いて広範囲で鉄筋間隔の計測が可能です。 国交省実施要領の全計測項目に対応しており、生産性や作業効率の大幅な改善が期待できます。 ★コンクリート養生温度管理システム おんどロイド【NETIS登録番号:KT-230101-A】 計測箇所ごとに警戒値を設定可能。計測データが警戒値を超えると担当者にメールでお知らせ！ 養生中のコンクリートの温湿度を24時間常時自動計測し、離れた場所からリアルタイムで監視・管理するシステムです。精度の高い管理システムで安心して施工を進められます。 冬季の寒中コンクリートの養生温度管理では、温度が警戒値を下回った場合に、所定の時間にジェットヒーターを作動させることも可能です。

• Other measuring instruments

You can check measurement data from a remote location! Automatically calculates the temperature difference between the surface and the center of the concrete.

【NETIS Registration Number】KT-230101-A The "Ondroid Temperature and Humidity Measurement System" allows for the setting of alert values for each measurement location. When the measurement data exceeds the alert values, the responsible person can be notified via email. It automatically calculates the temperature difference between the surface and the center of the concrete, which can be a factor in temperature cracking, and when the temperature or humidity at specific locations exceeds the alert values, it can automatically activate the irrigation pump or jet heater, leading to increased productivity through labor-saving measures. Please feel free to contact us if you have any requests. 【Features】 ■ Data differential monitoring function ■ Temperature difference monitoring function ■ Linkage with irrigation pumps and jet heaters *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

Although spot coolers have been introduced on-site, are you struggling with issues such as "only the person in front of the spot cooler can feel cool" and "it's actually hotter due to the heat exhaust"? In this seminar, we will provide detailed information on how to effectively utilize "cool air distribution ducts" to easily resolve these challenges associated with spot coolers without incurring significant costs. ＼Especially recommended for the following individuals／ - Those considering heat stroke prevention measures for factories, warehouses, or construction sites - Those who have introduced spot coolers but feel unsatisfied with their effectiveness - Those who want to improve their work environment easily without incurring high costs

We are pleased to announce the archive distribution of our hosted web seminar titled "Easily Create Beautiful Manuals for kintone with Image Copy-Paste and Markdown Using StockNaut." We will provide a clear explanation of the kintone plugin "StockNaut," which allows you to richly describe multiple images embedded in a multi-line text field. The "Markdown syntax" adopted by StockNaut enables the creation of text that is easy for both humans and generative AI to handle. By combining it with generative AI, you can experience the benefits of StockNaut at 120%! We welcome those who are struggling with document creation, including manuals, to join us. 【Recommended for the following people】 - Those who want to create procedures, manuals, or knowledge bases on kintone. - Those who find it cumbersome to adjust formatting every time they create a manual. - Those who have heard of StockNaut but have not yet tried it. - Those who want to structure knowledge and refine writing in anticipation of future AI utilization.

The basic course on agricultural entry for companies is designed for business owners and representatives who are considering entering the agricultural sector. It provides a clear explanation of the structure of the agricultural market, the considerations for entry, and the necessary points to establish a successful business, making it easy to understand for beginners. Agriculture does not succeed simply because the market is growing, nor can it thrive solely with cultivation techniques. It becomes a business only when products are produced and sold. Furthermore, creating a system that maintains this state while generating profits and fostering growth is crucial. In this course, you will systematically learn the thought processes for judging agricultural entry from three perspectives: "market," "failure," and "success." This content is recommended not only for companies considering agricultural entry but also for those in the information-gathering stage.

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 【July 1 (Wed) - July 3 (Fri), 2026】 'Next Generation 3D Printer Exhibition' (Tokyo Big Sight, West Hall) https://www.manufacturing-world.jp/hub/ja-jp/about/am.html ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ The 'Next Generation 3D Printer Exhibition' is a specialized exhibition that brings together the latest technologies in additive manufacturing (AM), 3D printers, materials, and contract manufacturing services. It showcases technologies that enhance efficiency and add high value to manufacturing, from prototyping and design to production. At Fujikohsokuhatsu Industry, we will introduce prototypes made with precision laser cladding 'ALPION' and metal 3D printer 'Meltio', as well as technologies that enable high functionality, long lifespan, and cost reduction through laser hardening and laser cladding. Please take a look at our laser solutions, from AM technology to surface modification and repair technologies. ★Booth Number★ W7-100 [Joint Exhibition with Marubun Corporation] *Advance registration is required and is free of charge.

TESSHA Corporation will be exhibiting at the "Plant Show 2026" held at Tokyo Big Sight. This is a comprehensive exhibition for the chemical and process industry plants that has been ongoing since 1966. We plan to showcase our small catalytic deodorization units "SCU-1EH type/SCU-5EH type." We sincerely look forward to your visit.