Notice of participation in the 18th Kansai Exterior Fair 2025 from June 5 (Thursday) to June 6 (Friday), 2025.

【Solving the Weed Problem】Resistant to rain and wind, usable on the surface. Exposure construction is also possible, and the weed suppression effect lasts for a long time!

Our company offers the weed control sheet "Ultra Weed Control Kun 300G." With UV degradation inhibitors and a unique manufacturing method, it enhances weather resistance and strength against UV rays, solving weed problems. 【Features】 ■ Weeding suppression ■ Excellent permeability ■ Can be cut with scissors ■ Easy installation ＼ For more details, please check the related links or feel free to contact us. ／

• Civil Engineering Sheet

"I want to choose a paving material that is safe because it is a place I pass by every day." A natural stone permeable paving material that considers people and the environment by using urethane resin that does not contain VOCs.

The "Laston Series" is a natural stone permeable paving material that uses urethane resin without VOCs, taking into consideration both people and the environment. 【Features】 ■ Excellent permeability, reducing concerns about puddles ■ Uses urethane resin that does not contain VOCs ■ The cured resin complies with food sanitation laws, making it safe for pets ■ Uses non-yellowing resin, preventing discoloration from UV rays ＼ For more details, please check by "downloading the catalog" ／

• stone

Effective in preventing thermal condensation in buildings by using foam particles for labor-saving and shortening construction periods in plastering work!

The new lightweight aggregate "H·S Sand" for undercoat mortar uses fine particles of expanded plastic as the main aggregate, which is blended with adhesives, thickeners, and water-retaining agents in the factory. It is a new lightweight aggregate used for plastering undercoat mortar. 【Features】 ■ Excellent adhesion in addition to preventing cracks and peeling ■ Energy-saving plastering material ■ Usable for a wide range of applications from thin to thick coatings ■ Lightweight and easy to apply, significantly improving work efficiency ＼ For more details, please check by downloading the catalog ／

• Mortar and plaster materials
• Plastering and painting work

Minimize cracks, maintain aesthetics, and reduce risks during disasters! A fiberglass net is embedded in the surface to suppress wall collapse during earthquakes.

The fiberglass net "HS Super Net" is made from highly durable glass fibers that have been treated for alkali and acid resistance. It is effective in suppressing cracks in mortar when used for full or partial reinforcement of wet exterior walls. 【Features】 ■ Exceptional durability due to alkali-resistant treatment ■ Reduced risk of wall detachment during earthquakes ■ Strong tensile strength from high-quality intertwined glass fibers ■ Easily integrates with mortar, significantly reducing initial cracking ■ Stable quality maintenance through world-standard quality control (ISO 9001 certified) ＼ For more details, please check "Download Catalog" ／

• Fiber wall
• Plastering base material
• Plastering and painting work

Prevent the occurrence of efflorescence! Waterproof base mortar that eliminates water absorption.

"Waterproof Kiso Mortar" is a pre-mixed waterproof mortar for foundations that prevents efflorescence by eliminating water absorption in the mortar. It contains a special waterproofing agent. It is lightweight, easy to work with, and allows for easy troweling. [Features] - No secondary efflorescence - Lightweight - Contains a special waterproofing agent For more details, please contact us or download the catalog.

• Premixed mortar
• Waterproofing work
• Plastering and painting work

Improved work efficiency! Lightweight aggregate for cement mixtures with excellent adhesion.

"H・S Mild Sand II" is a lightweight aggregate for cement mixing that uses calcium carbonate foam as its main raw material. It effectively absorbs and disperses the drying shrinkage of concrete structures and topcoat mortars, preventing delamination and cracking of finishing materials. It can be applied in thin layers or built up with multiple coats, allowing for easy adjustment of thickness. With moderate elasticity, it provides uniform pressure from troweling and excellent adhesion. 【Features】 ○ High work efficiency ○ Fatigue reduction effect ○ Cost reduction For more details, please contact us or download the catalog.

• Mortar and plaster materials
• Plastering and painting work

Easy to apply and efficient! Lightweight premixed mortar.

Exterior Wall Special Lightweight Pre-Mixed Mortar "PH Mortar" is a pre-mixed mortar that has a low occurrence of cracks. It is easy to apply in a follow-up coating. It is ideal as a base for brush application, painting, and spraying. 【Coating Thickness and Application Area】 ○ Coating Thickness: 5mm, Application Area: 5.0m² ○ Coating Thickness: 10mm, Application Area: 2.5m² ○ Coating Thickness: 15mm, Application Area: 1.7m² For more details, please contact us or download the catalog.

• Premixed mortar

Improved work efficiency! Easy-to-apply lightweight premixed mortar.

Lightweight premixed mortar "PH Mortar L" is a mortar that has a low occurrence of cracks. It is easy to apply in a follow-up coat. It is ideal as a base for brush application, painting, and spraying. 【Coating Thickness and Coverage Area】 ○ Coating Thickness: 5mm, Coverage Area: 5.2m² ○ Coating Thickness: 10mm, Coverage Area: 2.6m² ○ Coating Thickness: 15mm, Coverage Area: 1.7m² For more details, please contact us or download the catalog.

• Plastering base material
• Premixed mortar
• Plastering and painting work

Factory pre-mixed product! Mortar for undercoating with stable quality.

"Styrene-based New Sand Mortar" is a pre-mixed lightweight mortar made from styrene sand and cement. Since on-site mixing is not required, it can speed up plastering work. There is no worry about styrene scattering in the wind, and a stable quality base coat mortar can be obtained. 【Coating Thickness and Application Area】 ○ 4mm thickness: 8.1 m² ○ 6mm thickness: 5.5 m² For more details, please contact us or download the catalog.

• Premixed mortar
• Plastering and painting work

Ideal for block, foundation, and RC! Substrate leveling sand mortar.

"New Sand Block" is a pre-mixed sand mortar that has been improved for use as a base layer for blocks, foundations, and RC (reinforced concrete) surfaces. Its moderate viscosity, trowel spreadability, and ease of trowel sliding enhance work efficiency and reduce fatigue. 【Standard Mix】 ○ New Sand Block: 1 bag ○ HS Morubon: 1 kg ○ Water: Approximately 11 liters For more details, please contact us or download the catalog.

• Plastering base material
• Premixed mortar
• Plastering and painting work

Brush finishing and pressure finishing made easy! Ideally formulated pre-mixed mortar for foundations.

New Kiso Mortar is a lightweight pre-mixed mortar that emphasizes a brushed finish and is ideally formulated with only inorganic aggregates. It is lightweight and easy to work with, allowing for easy brushed and troweled finishes. 【Coating Thickness and Application Area】 ○5mm 4.4m² ○10mm 2.2m² For more details, please contact us or download the catalog.

• Mortar and plaster materials
• Premixed mortar
• Plastering and painting work

No need for water addition! Liquid type water-reducing agent compatible with 50kg of cement.

The water-reducing agent "Rasemake" for rough coat mortar eliminates the need for pre-coating water application when mixed with rough coat mortar, providing water reduction effects. Being a liquid type, it can be easily mixed by simply diluting it with water. 【Features】 ○ No need for water application ○ Compatible with 50kg of cement ○ Can be easily mixed by simply diluting with water For more details, please contact us or download the catalog.

• Plastering and painting work

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 【July 1 (Wed) - July 3 (Fri), 2026】 'Next Generation 3D Printer Exhibition' (Tokyo Big Sight, West Hall) https://www.manufacturing-world.jp/hub/ja-jp/about/am.html ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ The 'Next Generation 3D Printer Exhibition' is a specialized exhibition that brings together the latest technologies in additive manufacturing (AM), 3D printers, materials, and contract manufacturing services. It showcases technologies that enhance efficiency and add high value to manufacturing, from prototyping and design to production. At Fujikohsokuhatsu Industry, we will introduce prototypes made with precision laser cladding 'ALPION' and metal 3D printer 'Meltio', as well as technologies that enable high functionality, long lifespan, and cost reduction through laser hardening and laser cladding. Please take a look at our laser solutions, from AM technology to surface modification and repair technologies. ★Booth Number★ W7-100 [Joint Exhibition with Marubun Corporation] *Advance registration is required and is free of charge.

TESSHA Corporation will be exhibiting at the "Plant Show 2026" held at Tokyo Big Sight. This is a comprehensive exhibition for the chemical and process industry plants that has been ongoing since 1966. We plan to showcase our small catalytic deodorization units "SCU-1EH type/SCU-5EH type." We sincerely look forward to your visit.

At Dainakast, we regularly hold "Die Casting Technology Webinars" for those in the manufacturing industry. We have previously explained the following themes. If you missed them, please watch the recordings. "List of Themes" 1. Die Casting Technology (Die Casting Design) 2. Surface Treatment 3. Design of Zinc Die Casting 4. Cost and Value of Molds 5. Defects in Die Casting and Countermeasures 6. Changes in Manufacturing Methods for Die Casting 7. Basics of Die Casting and Multi-Slide Technology 8. Post-Processing of Die Casting 9. Lightweighting in Die Casting 10. Special Materials for Die Casting 11. Sustainability in Die Casting

The "Dainacast 10-Minute Understanding Series" is a series of die casting seminars that are completed in 10 minutes. 《Example Themes》 1. Dainacast Company Introduction 2. Zinc Die Casting 4. Multi-Slide Die Casting Machine "A2" Actual Machine Tour 6. Surface Treatment of Die Castings 7. DFM of Dainacast 8. Cold Chamber / Hot Chamber 9. Dainacast Suzhou 10. Standard Tolerances and Draft Angles 12. Process Changes from Machining 13. Process Changes from Resin Molding 15. Process Changes from Sintering and Forging 16. Process Changes from Other Methods 18. Considerations for Draft Angles 19. Considerations for Flatness 20. Multi-Slide Technology 21. Low-Temperature Shot Blasting 23. EZAC 24. Appearance Limit Samples 25. K-Alloy 27. Thermal Deburring 28. Nickel Plating 29. Ejector Pins 30. Whiskers 31. Three-Piece Casting 32. DX17 33. Color Anodizing 34. Magnesium Casting 35. Thin-Walled Molding 36. E-coat 37. Al Multislide 38. MAO Treatment Continued

The spread of generative AI is significantly changing information gathering behaviors in BtoB. Opportunities for prospective customers to click through and compare each Google search result are decreasing, and clicks obtained through search ads are becoming increasingly scarce. As a result, the cost per click and cost per acquisition (CPA) are soaring, making traditional methods unprofitable. Many BtoB marketing and sales leaders are currently facing this serious challenge. In this conference, we will thoroughly compare major BtoB strategies such as web advertising, trade shows, webinars, and outbound marketing from the perspective of "efficiency in generating business negotiations." We will provide detailed explanations of the realistic negotiation conversion rates for each strategy and the selection criteria to maximize cost performance. "I can generate leads, but they don't turn into negotiations." "CPA keeps rising, and I'm unsure about the next investment." "I want to break free from reliance on ads and identify strategies that lead to negotiations." Find guidance to solve these challenges and discover winning strategies for your company.