New products for 150 and 200 sizes, as well as XL size! ★ Additional lineup of dam square-shaped lead renovation drains and dam renovation strainers ★ Now available for purchase!!

Compatible with up to 200 for renovation drains! Introducing an all-stainless steel strainer!

All stainless steel with a simple design. Extra-large strainer compatible with size 200. Features a larger opening to prevent clogging with debris, designed in a mesh shape.

• Waterproof tape, adhesive, drain, protective panel
• Coating film waterproofing material/permeable waterproofing material
• Waterproofing work

Compatible with up to 200 for renovation drains! Introducing a strainer made entirely of stainless steel!

● Extra-large drain mesh strainer Compatible with size 200. A mesh shape designed to minimize clogging with a larger opening. Can be used for extra-large drains. ● All stainless steel SUS304 Simple design made entirely of stainless steel. ● Compatibility with substrate angles The butterfly nut on the side of the strainer allows for easy angle adjustment without the need for tools.

• Waterproof tape, adhesive, drain, protective panel
• Coating film waterproofing material/permeable waterproofing material
• Waterproofing work

Please try the "Damo angular lead renovation drain," which has been reborn as a highly functional renovation lead drain.

We would like to introduce the "Damo Square Lead Renovation Drain" handled by Yamato Co., Ltd. The "Damo Square Lead Renovation Drain" is a product that has undergone a model change from the previous Damo renovation drain. It is available in two types, N (Normal) and S (With Sand), allowing for selection based on application, and it accommodates various waterproofing methods. Additionally, it has been improved to allow for easier hose insertion compared to conventional products, and the flange part has been redesigned to a rounded shape. ■ Features of the Damo Square Lead Renovation Drain N (Normal) The flange part is made of raw lead, allowing it to be used with various waterproofing methods when a metal primer is applied. ■ Features of the Damo Square Lead Renovation Drain S (With Sand) The surface of the lead flange is treated with our unique sand coating process, which allows for stable adhesion of the waterproof coating using general substrate primers, as opposed to the usual requirement of using a metal primer for lead. This eliminates the need to differentiate primers during installation around the drain, thereby improving work efficiency.

• Waterproof sheet
• Waterproof tape, adhesive, drain, protective panel

This is a vertically oriented waterproof renovation drain made in Japan. Since it is molded as a single piece without any welding, it has no seams and a smooth finish, allowing it to blend well with the substrate.

The flange section is made of lead material, allowing it to be used in various waterproofing methods by applying a metal primer. ■ Excellent substrate conformity with integrated molded products Since it is molded as a single piece without any welding, there are no seams, resulting in a smooth finish. This allows for better adhesion to the substrate during installation, preventing any steps and improving drainage. ■ Rounded corner flange section The flange section has been changed from a round shape to a square shape. This increases the area for applying the waterproof layer and makes it easier to perform terminal processing. Additionally, the four corners have a rounded shape, eliminating concerns about damaging the waterproof layer.

• Waterproof sheet
• Waterproof tape, adhesive, drain, protective panel
• Subsidiary materials

The "Snake Slider" processing makes it even easier to insert the hose than conventional products. The main body remains integrally molded, while the flange part has been improved to a rounded shape.

The flange part is made of lead material, allowing it to be used in various waterproofing methods by using a metal primer. ■ Excellent substrate conformity with integrated molded products Since it is molded as a single piece without any welding, there are no seams, resulting in a smooth finish. This allows for better adherence to the substrate during installation, preventing unevenness and improving drainage. ■ Easy-to-insert bellows hose Thanks to our unique bonding method, the bellows hose is securely bonded without relying on hose clamps. As a result, there are no protrusions from the hose clamps, allowing for easy insertion without worrying about the position of the hose clamps. The end of the hose is processed with a snake slider (V-cut), making it easier to insert into existing drains. ■ Rounded corner flange The flange has been changed from a round shape to a square shape. This increases the area for applying the waterproof layer and makes terminal processing easier. Additionally, the four corners have a rounded shape, eliminating concerns about damaging the waterproof layer.

• Waterproof sheet
• Waterproof tape, adhesive, drain, protective panel
• Subsidiary materials

The surface of the brim has been treated with a unique sand coating method, maintaining the characteristics of N (Normal). It adheres reliably to the coating for waterproofing even with general base primers.

The surface of the lead flange has been treated with our unique sand coating process, allowing for stable adhesion of the coating even with general-purpose primers, unlike the usual metal primers used for lead. This eliminates the need to differentiate between primers during installation around drains, thereby improving work efficiency. ■ Excellent substrate conformity with integrated molded products Since it is molded as a single piece without any welding, there are no seams, resulting in a smooth finish. This allows for better adherence to the substrate during installation, preventing unevenness and improving drainage. ■ Rounded flange corners The flange has been changed from a round shape to a square shape. This increases the area for applying the waterproof layer and makes it easier to handle terminal processing. Additionally, the four corners have a rounded shape, eliminating concerns about damaging the waterproof layer.

• Waterproof sheet
• Waterproof tape, adhesive, drain, protective panel
• Subsidiary materials

The surface of the brim has been treated with a unique sand coating method, maintaining the characteristics of N (Normal). It adheres reliably to the coating waterproofing even with general base primers.

The surface of the lead flange is treated with our unique sand coating process, allowing for stable adhesion of waterproof paint even with general-purpose primers, unlike the usual metal primers required for lead. This eliminates the need to differentiate primers during installation around drains, thereby improving work efficiency. ■ Excellent substrate conformity with integrated molded products Since it is molded as a single piece without any welding, there are no seams, resulting in a smooth finish. This allows for better adherence to the substrate during installation, preventing any steps and improving drainage. ■ Easy-to-insert bellows hose Thanks to our unique adhesion method, the bellows hose is securely bonded without relying on hose clamps. As a result, there are no protrusions from hose clamps, allowing for easy insertion without worrying about the clamp's position. The hose tip is processed with a snake slider (V-cut), making it easier to insert the hose into existing drains. ■ Rounded flange The flange has been changed from a round shape to a square shape. This increases the area for applying the waterproof layer and makes terminal processing easier. Additionally, the four corners have a rounded shape, eliminating concerns about damaging the waterproof layer.

• Waterproof sheet
• Waterproof tape, adhesive, drain, protective panel
• Subsidiary materials

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. This is recommended for making doors with touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Allows for face recognition along with mask detection and body temperature measurement simultaneously. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and notifies via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, or management: Are you facing any challenges with current issues or selecting the right sensors for parking management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Vehicle Detection Sensor Basic Guide This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document presents the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

We will be exhibiting at the only comprehensive and cross-sectional international convention in the marine field in Japan, "Techno-Ocean 2025." In this exhibition, we will introduce a wide range of specialized survey services related to offshore wind power generation projects, including wind and sea condition surveys, O&M, sediment surveys, and fishing ground environmental monitoring. We will also showcase marine surveys and seagrass bed investigations using marine robots such as autonomous surface vehicles (ASVs) and underwater drones, as well as the collection of dead fish in aquaculture operations.

The energy policy promoted by the government has finally made a significant shift from "quantity to quality." The previous large-scale introduction of renewable energy policies relied on inexpensive foreign-made panels, leading to the chaotic installation of mega-solar farms across Japan's land, which created environmental, landscape, and waste issues. As a result, Japan's energy self-sufficiency rate remains at a mere 13%, and even with the advancement of renewable energy, "import dependence" has not been resolved. In light of this reflection, the focus moving forward will be on "developing domestic energy technologies" and promoting "self-consumption type renewable energy." Among these, perovskite solar cells are lightweight, highly efficient, and offer great flexibility in installation, making them a trump card for "decentralized renewable energy" that can be easily retrofitted onto building walls and roofs. Kenneth Energy Development Co., Ltd. is developing a "selective self-consumption solar power generation system" that utilizes domestic panels and perovskite technology. Based on a track record of 83 projects nationwide and a total construction cost of 908.4 billion yen, it supports the industry's "energy independence." Now, renewable energy is entering an era of "security infrastructure."

"Perovskite solar cells" are once again emerging at the center of Japan's renewable energy policy. Mr. Takai has proposed "nurturing domestic technology for renewable energy" as part of energy and industrial policy, causing related stocks to attract attention in the market as the "Takai trade." The background to this is Japan's long-standing dependence on foreign-made panels in its renewable energy structure. While inexpensive imports have supported proliferation, they have also left a "negative legacy" of forest development, disposal risks, and price fluctuations. If this continues, both the land and energy supply will be controlled by foreign entities—this sense of crisis is the trigger for policy change. Perovskite solar cells possess the trifecta of being lightweight, highly efficient, and low-cost, making installation in existing buildings easy. Development is progressing as a domestic technology, and it is expected to become a mainstay for self-consumption power generation in the future. Kenneth Energy Development Co., Ltd. is developing a "next-generation self-consumption solar power system" with an eye on these perovskite cells. With over 8,000 installations nationwide and expertise in subsidy support, they are turning companies' "energy independence" into reality.