With the lessons of March 11 in mind, prepare for the future.

Emergency power supply ELSONA that can use "LP gas" and "gasoline" for stable supply during disasters for power outage measures 【*Disaster area support report available】

ELSONA is a generator that can use both LP gas and gasoline, born from the experience of the Great East Japan Earthquake. In response to the "Noto Peninsula Earthquake" that occurred on January 1, 2024, we donated 14 units of ELSONA to Suzu City and Noto Town as part of our support activities. In disaster-stricken areas, the road conditions are poor, making it difficult for transport vehicles to enter, and there are often purchase restrictions, making it extremely challenging to obtain gasoline. On the other hand, LP gas can be used from home gas cylinders or cylinders supplied by local governments, allowing for a stable supply even during disasters. In the affected areas, it served as a power source for lighting and smartphone charging stations, greatly appreciated by the local residents. Currently, we have surpassed 2,300 units in operational achievements. Many of the delivery destinations are local governments, and last year, 17 units were also delivered to the "Japan Ground Self-Defense Force Narashino Garrison," expanding our areas of activity. For more details, please download the PDF or feel free to contact us. ■GD1600SR Rated output: LP gas 1.53kVA, Gasoline 1.7kVA ■GD5000SR Rated output: LP gas 4.5kVA, Gasoline 5.0kVA ■T-7500 Rated output: Maximum 7.0kVA (50Hz), Maximum 7.5kVA (60Hz)

• Power generation equipment

All employees are certified disaster prevention specialists delivering disaster prevention information!

"Disaster Prevention by G&ECO" is a disaster prevention column written by employees of G&ECO Corporation. All employees are certified disaster prevention specialists who provide disaster prevention information. / Theme of Series No. 24 / 2024 Reflection Report! Experiencing the Reliability of "LP Gas" at Disaster Sites! While reflecting on past disasters, □ Preparing electricity so that we are not troubled if a disaster occurs tomorrow □ The reliability of "LP Gas" at disaster sites We summarize these points. Immediately after the Noto Peninsula earthquake, G&ECO headed to the disaster-stricken area and donated 14 units of the generator "ELSONA GD1600SR," which can use both LP gas and gasoline. During our support activities in the affected area, we realized that "LP Gas" is more accessible than "gasoline," which is difficult to obtain due to purchase restrictions, as it can be sourced from home gas cylinders or cylinders supplied by local governments, making it a resilient energy source in times of disaster. *For more details on the column, please refer to the related links. For further inquiries, feel free to contact us.

• Prime movers, torque converters, hydraulic equipment, generators

Experience support for the disaster-stricken areas of the Noto Peninsula earthquake! Prepare for disasters with an excellent emergency power source that can use both LP gas and gasoline as stockpiled fuel. [Comprehensive catalog available now]

ELSONA is a generator that can use both LP gas and gasoline, born from the experience of the Great East Japan Earthquake. In response to the Noto Peninsula Earthquake that occurred on January 1, 2024, we conducted support activities, including donating 14 units of the generator "GD1600SR" to Suzu City and Noto Town in collaboration with local governments. On-site, we witnessed situations where gasoline-powered generators were available but could not operate due to the difficulty of obtaining gasoline, and although LP gas was available as a decentralized energy source, there were no compatible generators. This reinforced our recognition of the advantages of a generator that can use both fuels. In August 2024, the "Nankai Trough Earthquake Emergency Information" was announced, and we have received many inquiries. If you are considering our products, please contact us as soon as possible. ■GD1600SR Rated output: LP gas 1.53kVA, Gasoline 1.7kVA ■GD5000SR Rated output: LP gas 4.5kVA, Gasoline 5.0kVA ■T-7500 Rated output: Maximum 7.0kVA (50Hz), Maximum 7.5kVA (60Hz) *For more details, please download the PDF or feel free to contact us.

• Power generation equipment

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, or management: Are you facing any challenges with current issues or selecting the right sensors for parking management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Vehicle Detection Sensor Basic Guide This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document presents the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who want to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. Depending on the application and installation location, you can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520." 【Recommended for such places!】 ☑ Entrance facing a busy passageway ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passageways ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing to minimize power consumption, contributing to energy-saving effects ● Equipped with a light touch function, allowing the door to open and close simply by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

The television program "Ushiwaka Chapter 6 - The Challenges of Skilled Workers Protecting Japan's Infrastructure" will feature Azeas. In addition to terrestrial broadcasting, there will also be an archive distribution on ABEMA TV. Please be sure to watch. ● Broadcast Schedule Nagoya TV (Me-Tele): June 2, 2026 (Tuesday) at 23:10 ABEMA TV: June 4, 2026 (Thursday) at 24:00 (Free, with archive distribution available) Hiroshima Home TV: June 4, 2026 (Thursday) at 24:45 KKB Kagoshima Broadcasting: June 7, 2026 (Sunday) at 17:25 *For more details, please feel free to contact us through the related link below: [Protective Clothing Wisdom.com]. [Protective Clothing Wisdom.com] is a comprehensive information site for safe working environments, providing guidance on protective clothing and equipment for different work environments, methods for putting on and taking off, and information on customer usage records.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.